A Groundwork company - serving Oakland, CA

Vanities, Tile & Fixtures in Oakland, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Vanities, Tile & Fixtures in Oakland, CA

Vanities, tile, and fixtures are the three elements that decide whether a bathroom feels finished or half-done. The vanity anchors the room and sets the storage plan, the tile decides how the floor and shower read from the doorway, and the fixtures (faucets, showerheads, drains, trim) are what you actually touch every morning. Groundwork Construction Co. of Oakland handles all three as one coordinated scope, so nothing gets ordered late, cut wrong, or fighting another trade for space. Call (833) 997-7759 and a live person picks up, day or night.

This is the work that turns a dated Oakland bathroom into something that matches the rest of the house. It’s also the work where cheap bids fall apart: the tile that’s discontinued three weeks after you pick it, the vanity that arrives without a compatible top, the shower valve that doesn’t fit the rough-in you already have. We plan around those problems before demolition starts. If you’re weighing a full overhaul against a focused upgrade, start with our home remodeling services, then decide whether the vanity, tile, and fixture package is your whole project or part of a larger Bathroom Remodeling in Oakland.

The tradespeople on these jobs are background-checked and arrive in uniform, with up to 12 years of experience on tile and fixture work. Every installation is backed by our 730-Day Done Right Promise, which covers workmanship for two full years. If a joint fails, a drain weeps, or a faucet cartridge goes bad because of how it was installed, we make it right.

What this scope actually covers

  • Vanities: freestanding, wall-hung, and built-in vanities with stone or quartz tops, matching backsplashes, undermount or vessel sinks, and the plumbing rough-in changes that come with moving a drain or adding a second sink.
  • Tile: floor tile, shower walls, tub surrounds, wainscoting, niche boxes, shower pans, and the waterproofing underneath all of it.
  • Fixtures: faucets, shower valves and trim, showerheads, tub spouts, drains, towel bars, mirrors, and lighting if the electrical is part of the scope.

We’re not a tile-only shop or a vanity showroom with a phone number. We coordinate all three so the layout works before anything is ordered.

When You Need Vanities, Tile & Fixtures

Most Oakland homeowners call us at one of a few recognizable moments. See if any of these sound familiar.

  • The vanity is original to the house and it shows. Plenty of Oakland bathrooms still have the 1960s or 1970s cabinet with a laminate top that’s bubbled up around the sink. The drawers don’t close, the toe kick is water-stained, and there’s no usable storage for towels. A new vanity plus a quartz or stone top often changes more of the daily experience than any other single upgrade.
  • The shower tile has failed. Grout lines that keep cracking, tiles that sound hollow when you tap them, or a soft spot at the curb usually mean the waterproofing behind the tile has been compromised. In Oakland’s older housing stock, especially in the flats where decades of moisture have had time to work, patching over a failing shower pan is throwing money at a problem that comes back. We treat re-tiling as a waterproofing job first and a finish job second.
  • You’re chasing leaks or water damage. A stained ceiling below the bathroom, a vanity cabinet that swells at the base, or caulk that keeps failing points to a fixture or drain problem. We open the wall or cabinet as needed, fix the source, then rebuild the tile and vanity around a sound substrate.
  • You want the fixtures to match the rest of the remodel. When a bathroom gets new flooring or paint, the original chrome faucet and builder-grade showerhead start looking out of place. Swapping fixtures is a contained project that doesn’t require a full tear-out, provided the rough-in dimensions and valve types line up.
  • You’re preparing to sell or rent. Oakland buyers and renters notice bathroom finishes. A clean vanity, sound tile, and modern fixtures read as a maintained property. We’ve done plenty of these as pre-listing upgrades where the goal is durability and a clean look, not a showpiece.
  • You’re adding a second sink or reworking the layout. Moving a drain, adding a second basin, or converting a tub to a walk-in shower changes the plumbing and the tile layout at the same time. That’s a coordinated job, not three separate contractors showing up on different weeks.

Our Vanities, Tile & Fixtures Process

Here’s how the work runs from first call to final cleanup. The goal at every step is a decision made once, in writing, before anyone swings a hammer.

  1. On-site measure and design consult. We measure the room, check existing plumbing and electrical locations, and confirm what’s behind the walls where we can. You’ll get a free project estimate and design consult, and a live person is available 24/7 if questions come up after hours. If your project grows beyond the bathroom, we can talk through Bathroom Remodeling in full scope or a broader home upgrade.
  2. Material and fixture selection. We walk through vanity sizing and finish, countertop material, tile format and layout, and fixture brands. We work with a curated set of brand partners across every trade, so you’re choosing between quality options rather than whatever happens to be in stock. Glass and shower enclosure selections often pull in Mr-Glass; door and trim details sometimes bring in Therma-Tru or ViewLux, depending on what the room needs.
  3. Order, verify, stage. Every item gets ordered and confirmed before demolition. Tile lots are checked for dye-lot consistency, vanities are confirmed for rough-in compatibility, and fixtures are checked against the valve body and drain sizes. This step is where we catch the problem that would otherwise stall the job for two weeks.
  4. Demo, rough-in, and substrate work. We remove the old vanity, tile, and fixtures, inspect framing and subfloor, repair any rot or water damage, then set the rough-in for drains, supply lines, and valves. Shower and tub areas get proper waterproofing before a single tile goes up. That step is non-negotiable on our jobs.
  5. Tile, vanity install, and fixture set. Tile goes down and up, grout cures, vanity gets set and leveled, countertop and sink are installed, and fixtures get set and tested. We check for leaks and drainage function before we call it done.
  6. Final walkthrough and warranty register. We walk the room with you, demonstrate the fixtures, and hand over care instructions for tile and stone. The work is covered under the 730-Day Done Right Promise from the day we finish.

What we check before we ever quote

  • Whether the existing valve is compatible with the fixture line you want (older Oakland homes often have valve bodies that won’t mate with modern trim without replacement).
  • Subfloor condition and joist spacing under the tile area, since deflection is a common reason floor tile cracks.
  • Drain location and whether a new vanity footprint puts the drain in an awkward spot behind a drawer.
  • Wall framing for wall-hung vanities, which need blocking that isn’t always there.
  • Whether the current exhaust fan actually vents to the exterior, because no tile job survives a bathroom that stays damp.

A note on tile and shower work

Shower and tub work involves waterproofing, setting materials, and plumbing connections, and getting any of those wrong creates a slow, expensive failure behind the wall. We don’t recommend pulling out an existing shower pan or re-plumbing valves as a DIY weekend project. Our crews do that work, and it’s covered in writing. If you want to understand what’s happening in your bathroom, we’re glad to explain it during the walkthrough.

Vanities, Tile & Fixtures Pricing in Oakland

Here’s what this scope actually runs in Oakland. These are honest ranges for quality materials and licensed labor, not the lowest-bid numbers that tend to come back with change orders. Every project gets a free estimate and upfront pricing, so the number you see is the number you pay.

Scope Typical range What drives the number
Vanity replacement only (cabinet, top, sink, faucet) $1,200 – $3,800 Cabinet size and material, quartz vs. stone top, single vs. double sink, plumbing changes
Floor tile only $1,400 – $4,200 Square footage, tile format and material, subfloor repair, complexity of cuts
Shower or tub surround re-tile (including waterproofing) $3,200 – $8,500 Waterproofing system, tile selection, niche and bench work, valve replacement
Full fixture replacement package $600 – $2,400 Number of fixtures, valve compatibility, brand tier, shower enclosure type
Combined vanity, tile, and fixture package $6,500 – $16,000 Room size, layout changes, material selections, and whether plumbing or electrical moves

Three things move the number most. Material choice, since tile and countertops span a wide price band. Layout changes, because moving a drain or adding a sink means opening walls and re-running plumbing. And the condition behind the old tile, since water damage discovered at demo has to be repaired before anything new goes down. We price that repair into the bid after we’ve seen the room, not as a surprise change order mid-job.

To make a larger package manageable, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Most jobs are completed in a single visit once materials are on site, though full shower re-tiles with waterproofing cure time occasionally need a return trip. Call (833) 997-7759 for an exact quote. Estimates are free.

What affects your Oakland bathroom pricing most

  • Tile format and material. Large-format porcelain costs more to install than a standard 12×12, and natural stone needs sealing and more careful layout.
  • Waterproofing scope. A shower pan rebuild adds labor and material, but skipping it is how tile fails in three years.
  • Plumbing changes. Moving a drain or adding a second sink means opening walls and re-running pipe, which is real labor and real drywall repair.
  • Fixture tier. Kohler and comparable brands sit at the quality end, and their valve bodies and trim systems are built to last. Cheaper fixtures often fail at the cartridge within a few years.
  • Access and building type. A second-floor bathroom above a finished ceiling means more careful work below. Older Oakland housing stock sometimes means surprises in the framing.

FAQs – Vanities, Tile & Fixtures

How much does a bathroom vanity and tile package cost in Oakland?

A combined vanity, floor tile, shower surround, and fixture package typically runs $6,500 to $16,000 in Oakland, depending on room size, material choices, and whether plumbing moves. A vanity-only replacement is usually $1,200 to $3,800. Call (833) 997-7759 for an exact quote after we’ve measured the room. Estimates are free.

Can you install a new vanity and tile in a single visit?

Most vanity and fixture installations finish in one visit once materials are on site. Full tile work with waterproofing and cure time sometimes needs a return trip, since we won’t grout over a shower pan that hasn’t properly cured. We’ll give you a realistic schedule before we start, and our crews are background-checked and uniformed on every job.

Do I need to move out during the remodel?

Most homeowners stay in the house during vanity, tile, and fixture work. We contain the dust, protect adjacent flooring, and stage materials to keep the disruption to one room. If your only bathroom is being fully re-tiled, we’ll talk through the schedule so you know which days the fixtures are out of service.

What happens if something goes wrong after the install?

Our 730-Day Done Right Promise covers workmanship for two years. If a shower leaks, a tile joint fails, or a vanity isn’t installed properly, we come back and make it right. That’s a written commitment, not a verbal one. Call (833) 997-7759 and a live person will get it scheduled.

When your bathroom needs new vanities, tile, or fixtures, the difference between a job that lasts and one that fails is in the planning and the waterproofing. Groundwork Construction Co. of Oakland brings both, backed by the 730-Day Done Right Promise, upfront pricing, and 0% financing for 18 months. Call (833) 997-7759 for a free estimate and design consult. A live person answers 24/7.

Written by the team at Groundwork Construction Co. of Oakland, serving Oakland.

Need Construction help in Oakland? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch