Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Oakland, CA
We provide independent Mr-Glass service across Oakland, from frameless shower enclosures and walk-in shower installs to tub-to-shower conversions and custom mirrors. What makes our Mr-Glass work different here is that we plan every job around Oakland’s pre-1940 housing stock, where a bathroom gut can uncover an unpermitted shower or a rotted curb before a panel ever gets templated. Groundwork Construction Co. of Oakland is an independent provider, not affiliated with or authorized by the manufacturer. Call (833) 997-7759 for a free estimate.
Why Oakland Residents Choose Us for Mr-Glass Service
We work on Mr-Glass products constantly, so the model lines, the hardware, and the failure patterns are familiar ground. Our technicians have up to 12 years of experience, and that time gets spent largely in Oakland bathrooms where the opening is never quite square and the glass has to be fitted to what’s actually there, not what a spec sheet assumes.
We source OEM-compatible parts, use genuine replacement rollers, hinges, sweeps, and channel where the enclosure is still in production, and spec quality aftermarket stainless hardware when a line has been discontinued. Every job runs on upfront pricing and our 730-Day Done Right Promise, backed in writing. When you call, a live person picks up around the clock. Most enclosure and shower work is completed in a single visit once the opening is sound, which matters on a real Oakland schedule. You’ll find the same standard across all our Mr-Glass service.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Oakland
- Seized rollers and dropped bypass doors. Semi-frameless bypass hardware that has sat in Oakland’s damp coastal air for years starts to bind, and the door sags and drags on the bottom rail until it chips. Salt air on the flats and constant winter moisture both speed this up.
- Failed sweeps and jamb seals. Urethane sweeps and silicone at the curb and wall jambs wear out on Oakland’s wet-winter, dry-summer cycle. Once the seal goes, water tracks under the enclosure and softens the curb or rots the subfloor beneath.
- Out-of-plumb jambs stressing frameless glass. Victorian and Craftsman bathrooms rarely have plumb walls or level headers. A frameless panel forced into a leaning opening carries stress at the hinge points, which can lead to cracking or spontaneous shattering of tempered glass.
- Hard-water etching and mineral clouding. Oakland’s older plumbing leaves mineral deposits that etch the glass over time. It reads as a permanently dirty shower, and no amount of scrubbing brings the clarity back.
- Unpermitted prior work hiding behind tile. Many pre-1940 Oakland homes have a shower or layout change that was never inspected. Opening the wall for an enclosure install often reveals plumbing or framing that has to be corrected first.
Mr-Glass Service in Oakland: What Local Conditions Mean for Your Equipment
Oakland’s building department requires an engineering letter for even modest structural changes in pre-1970 homes. That single rule changes how a Mr-Glass enclosure job gets planned here. A bathroom gut that uncovers a rotted curb, an unpermitted prior shower, or a sistered joist under the floor can turn a straightforward glass install into a permitted, engineered scope before a single panel is templated. In Rockridge and Temescal bungalows we routinely find that the opening looks fine until the old doors come off and the jamb framing turns out to be patched and out of square. Running the permit and engineering question early, rather than resealing a failing unit twice, is the difference between a glass job that lasts and one that keeps coming back. For Mr-Glass owners, that means we check plumb, square, and the curb condition before we order or template anything.
Mr-Glass Models & Products We Service in Oakland
We install and service Mr-Glass frameless shower enclosures in both 3/8″ and 1/2″ tempered glass, in standard pivot and sliding configurations, along with semi-frameless bypass and pivot shower doors. We also handle custom-cut mirrors and vanity mirror sets and Mr-Glass storefront and patio sliding glass door units.
Parts are sourced per job, not pulled from local stock, so each enclosure gets the right hardware for its model and opening. We use genuine Mr-Glass rollers, hinges, sweeps, and channel where the line is in production, and quality stainless aftermarket components rated for wet coastal use where it isn’t. If the glass is etched or the opening is out of square beyond what the hardware can adjust, we say so and recommend replacement instead of resealing a unit that will fail again.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Oakland
Cost depends on the opening condition, the glass thickness, and whether the curb or framing needs repair before templating. Here are the ranges we work from in Oakland:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes an on-site check of the opening for plumb and square, a look at the curb and seals, and a written line-item quote with no change-order surprises. The number you see is the number you pay. Call (833) 997-7759 for an exact quote on your Oakland enclosure.
Serving Oakland, CA – Our Local Coverage Area
We serve Oakland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Oakland
Yes, but it takes adjustment, not a stock panel. Frameless glass can be templated to a leaning opening within limits, and where the jamb is too far out we correct the framing or use a custom-cut panel. We measure the actual opening before anything is ordered.
It’s usually a failed sweep and jamb seal combined with a jamb wall that was never plumb, so the door has been torquing against its rollers. New stainless rollers and sweeps plus a plumb check fix the drag; if the glass or opening is beyond adjustment, replacement is the honest call. Call (833) 997-7759 and we’ll take a look.
It can. Oakland requires an engineering letter for even modest structural changes in pre-1970 homes, so if the conversion uncovers a rotted curb or framing, the scope becomes permitted and engineered. We flag that early so there are no surprises mid-job.
Mild mineral clouding can sometimes be polished out, but etched glass rarely comes back to full clarity, and replacement is usually the better spend. We’ll tell you which side of that line your glass is on. Call (833) 997-7759 for an assessment.
The wet-winter, dry-summer cycle ages sweeps and silicone seals faster than a stable climate would, so water gets under the enclosure and softens the curb. Annual inspection of the seals and rollers heads off the rot and the dragging door. Call (833) 997-7759 to schedule a check before the rains.
Service Areas Near Oakland
We serve Oakland along with the surrounding East Bay, including Oakland service area coverage that extends to Piedmont, Alameda, Emeryville, Berkeley, and Albany. Bungalows on the flats and homes in the hills all get the same on-site opening check and written quote.
Book Your Mr-Glass Service in Oakland Today
Whether it’s a frameless enclosure, a walk-in shower, or a tub-to-shower conversion, we’ll check your opening, price it straight, and back the work with our 730-Day Done Right Promise. Call (833) 997-7759 for a free estimate, and a live person answers any hour.
Written by the team at Groundwork Construction Co. of Oakland.