Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Richmond, CA
We provide independent Mr-Glass service across Richmond, and the one thing that sets our work here apart is that we treat frameless and semi-frameless shower enclosures as a specialty, not a sideline. That matters in a city where most bathroom walls are stucco-and-wood-frame and older than the people living in them. From the wartime duplexes in 94804 to the bungalows up in 94805, we connect you with independent local pros who know the difference between a hinge that needs replacing and a glass panel that needs replacing. Call (833) 997-7759 to set up a free estimate.
Why Richmond Residents Choose Us for Mr-Glass Service
Groundwork Construction Co. of Oakland is an independent Mr-Glass service provider, not manufacturer-affiliated or authorized. That’s the whole point. We answer to the homeowner, not to a parts catalog or a brand desk. Our technicians have up to 12 years of experience with the brand’s enclosure systems, and they’ve spent a lot of that time in Richmond zip codes like 94804 and 94805, where the housing stock is older and the walls are rarely square.
We work with OEM-compatible replacement parts for Mr-Glass hardware – the hinges, guide blocks, sweeps and seals that actually fit the original profile. Our Mr-Glass service covers the full range of enclosure work, and we’ve built our reputation on telling you straight when a repair is the honest answer and when a replacement is. Calls are answered by a live person 24/7, and every project comes with our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Richmond
These are the failure modes we see most often on Mr-Glass enclosures in Richmond. Almost every one of them is tied to something specific about this city’s climate or housing stock.
- Corroded pivot hinges and bottom guide rails. Richmond’s salt-laden marine air attacks the plated hardware long before the glass is compromised. Doors start to bind, then sag out of alignment. The glass is usually fine – the metal isn’t.
- Dried-out urethane gaskets and vinyl sweep seals. The foggy, wet-winter cycle here drives moisture behind the seal. Once it pulls away, you get hard-water staining and eventually mold at the curb. A new sweep and fresh caulk fix more of these than homeowners expect.
- Out-of-plumb walls in older Richmond bathrooms. Semi-frameless doors on pre-1950s stucco-and-wood-frame walls often gap along the strike jamb. No amount of hinge adjustment fixes it; the opening itself is out of square.
- Edge chipping and stress breakage in tempered glass. Improperly shimmed or settling curb and wall connections put stress on the glass edge. The pier-and-post foundations common in this city’s older homes let floors move seasonally, and the glass pays for it.
- Water damage hiding behind the tile. When a sweep seal has been failing for a couple of seasons, the first sign is a soft spot at the curb or grout that keeps cracking. We flag it before reassembling anything.
Mr-Glass Service in Richmond: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes more Mr-Glass bathroom projects in Richmond than any other: many of the postwar duplexes near the old shipyards share a single water service line between units. Add a shower or a fixture, and the project can trigger a mandatory upgrade to separate metering. That’s a permitting and inspection step – not a glass step. But it controls the schedule. Enclosure templating waits on the rough-in, the rough-in waits on the meter upgrade, and a job that looked like a two-week shower swap can stretch out by weeks. In ZIP 94804, we’ve seen this hold up plenty of renovations that were otherwise ready to go. If your Richmond property is a duplex and your project adds a fixture, plan the meter conversation before anyone orders glass. Our Richmond service area team can walk you through the sequencing.
Mr-Glass Models & Products We Service in Richmond
We service the full Mr-Glass enclosure lineup: frameless sliding shower door systems built for standard 60-inch tub and shower openings, semi-frameless pivot shower doors, inline panel enclosures, custom-cut tempered glass panels and fixed glass screens, plus mirrored closet and wardrobe sliding door sets.
On parts, we use OEM or direct-fit replacement hinges, guide blocks, sweeps and seals wherever the original profile is still in production. Aftermarket pivot hardware rarely matches the machined tolerances of Mr-Glass carriers, and in salt air the gap shows up fast. We source parts for each job rather than claiming local stock – we don’t carry inventory, and we won’t pretend otherwise. When the glass is intact but the hardware is shot, we reseal and re-hang. When panels are chipped at the edge or the opening is out of square, replacing the enclosure is the honest answer.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Richmond
The ranges below are what Richmond-area projects typically run. The scope of the opening, the condition of the curb and tile, and whether the water line situation forces a schedule change all move the number.
| Service | Typical Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
A free estimate includes a walk-through of the opening, a check for plumb and level, and a written line-item quote so you know what you’re paying for. Upfront pricing, no surprises. Call (833) 997-7759 for an exact quote on your Richmond project – estimates are free.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Richmond
Yes – on many duplexes near the old shipyards it does. Adding a shower or fixture can trigger a mandatory separate-metering upgrade, which can push inspection and templating out by weeks. Call (833) 997-7759 before you order glass so the schedule gets planned correctly.
Richmond’s foggy, salt-laden marine air attacks plated hardware faster than in drier inland cities. The glass usually outlasts the hinge. Swapping to the correct OEM-fit hinges buys years; aftermarket pivot hardware tends to fail again sooner.
Often yes – a qualified pro measures the actual out-of-square condition and specifies the enclosure accordingly. Some pre-1950s openings can be squared with minor blocking; others need a custom-cut panel. Either way, it’s a measurement decision made before the glass is ordered.
Walk-in shower installation here typically runs $4,500 – $12,000, with the range driven by tile condition, curb and wall condition, and glass configuration. A small bathroom remodel that includes a shower runs $5,000 – $12,000. Call (833) 997-7759 for a free estimate.
Not as a manufacturer claim – we’re independent and not authorized by Mr-Glass. Any manufacturer warranty stays with the product as sold. Our own work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
Service Areas Near Richmond
We also handle Mr-Glass service in San Pablo, El Cerrito, Berkeley, Albany, and Oakland – same salt air, same older housing stock, same approach to honest repairs.
Book Your Mr-Glass Service in Richmond Today
Whether your enclosure needs new hinges and sweeps or a full replacement, we’ll give you a straight answer and an upfront price. Calls are answered by a live person 24/7. Call (833) 997-7759 to schedule your free estimate in Richmond today.
Written by the team at Groundwork Construction Co. of Oakland.