Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in South San Francisco, CA
We install and repair Unilock hardscapes across South San Francisco, CA, and the one thing that separates our work here is what happens under the pavers: on the bay-fill side of Highway 101, a Unilock driveway or patio needs a deeper, reinforced base than the same product would on solid ground anywhere else on the Peninsula. We are an independent crew, not a Unilock dealer or factory representative, and we say so openly. What we bring is daily, hands-on work with Brussels Block, Beacon Hill, Umbriano and Thornbury, plus an honest read on what this city’s ground and weather do to all four.
Call (833) 997-7759 to set up a free estimate. A live person answers, day or night.
Why South San Francisco Residents Choose Us for Unilock Service
Homeowners here tend to get burned by pavers installed like they were planted on the bedrock hillside lots west of El Camino. The products themselves hold up fine. The base is usually what fails.
That’s where we earn the call. Our technicians have up to 12 years of experience with Unilock’s system – the engineered layers of excavation, geotextile, compacted aggregate and edge restraint that make the visible surface last. We know how Brussels Block and Thornbury settle over time, how Umbriano’s tight joint tolerances reward a properly graded slope, and how Beacon Hill wall units behave when they’re retaining wet soil. We know which parts must come from Unilock to keep color and dimension matched, and where a quality aftermarket aggregate does the job just as well.
Every project carries our 730-Day Done Right Promise. If a joint starts wandering or a paver heaves a year in, we come back and make it right. That’s the whole point of a written guarantee.
And when something goes wrong, you’re not leaving voicemails into the void. A live person, 24/7, on the other end of (833) 997-7759.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in South San Francisco
South San Francisco’s fog belt and onshore winds punish exterior hardscape in ways that a sunnier town ten miles south never sees. Here’s what shows up on our estimates most often:
- Efflorescence and moisture staining. Persistent fog keeps the pavers damp for long stretches, and the mineral salts wick to the surface. It’s cosmetic, but on a north-facing Unilock patio it can look permanent by spring. We treat it and correct the drainage that keeps water sitting under the surface.
- Settlement and heaving. Pavers over bay-fill soils with high water tables don’t settle evenly – they cup and ridge. A Unilock Brussels Block driveway that looks level in August can develop dips and rockers after a wet winter. The fix almost always lives in the base, not the top.
- Joint sand erosion. Wind-driven rain strips polymeric sand out of the joints over a few seasons. Once the joints open, pavers loosen and weeds move in. We re-sand with the right product and address the edge restraint that let the sand escape.
- Surface spalling and scaling. Cool, damp summers and repeated wet-dry cycles can scale older Unilock lines, especially where the surface was sealed incorrectly. We inspect before recommending replacement – a lot of scaling is treatable.
- Failed base at the driveway apron. Where a Unilock driveway meets the street, the soil stays wettest and takes the most load. A localized repair with matched OEM pavers often saves a full tear-out.
Call (833) 997-7759 for a look at the actual problem. Estimates are free.
Unilock Service in South San Francisco: What Local Conditions Mean for Your Equipment
This is the part most paver pages skip. The flat industrial land east of Highway 101 – built on bay fill and former salt ponds – has a high water table and soils that are prone to liquefaction. That changes the specification for a Unilock installation, not just the price. A base that would be entirely adequate on a lot up west of El Camino, where you’re on bedrock, simply won’t hold pavers east of the freeway. The water can’t drain, the fill can shift, and a properly compacted 4-inch aggregate base is asking for trouble. On those lots we go deeper, lay a geotextile reinforcement layer to separate the native fill from the aggregate, and often run dewatering during construction because the excavation fills faster than a dry site ever would. This is a step that’s rarely needed a few miles west. It’s also why a quote for the same square footage of Umbriano can legitimately differ across town, and why any installer who hands you one flat rate for all of South San Francisco is guessing.
Unilock Models & Products We Service in South San Francisco
We work across the Unilock product families that show up on local driveways, patios and retaining walls: Brussels Block for that tumbled, old-street look; Beacon Hill for wall units and retaining applications; Umbriano for its tight, modern profile; and Thornbury for a cut-stone finish that fits the older homes on the flatlands. Finish and color matching during a repair is the reason we source OEM Unilock pavers and wall units whenever a joint line, chamfer or shade has to line up with what’s already down. Aftermarket is fine underneath – aggregate base, geotextile, and drainage. We don’t claim to stock parts locally; every unit for a repair is ordered to the specific line and color of your existing installation so the patch doesn’t announce itself.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in South San Francisco
Bay-fill base work is what moves these numbers. A driveway on the east side carries more excavation and reinforcement than one on solid ground, so treat the range as a real one, not a sales floor.
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Driveway Replacement | $5,900 – $16,520 |
What drives your number: total square footage, the depth of stable base required (the big one over bay fill), dewatering if the site needs it, edge restraints and drainage, and whether you’re replacing an existing surface or starting fresh. A free estimate includes an on-site look at the soils and slope, a written line-item quote with Upfront pricing – the number you see is the number you pay – and 0% financing for 18 months for those who want it. Call (833) 997-7759 to get exact pricing for your property.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in South San Francisco
Fog keeps the surface damp for long stretches and onshore wind drives rain into the joints, which speeds up efflorescence, sand erosion and – on older lines – spalling. The counter is a base with proper drainage, polymeric sand rated for wet climates, and correct slope so water leaves the surface instead of sitting on it. Given the fog belt here, drainage design matters more than in sunnier towns nearby. Call (833) 997-7759 and we’ll evaluate the drainage on your site, free.
Yes, but they need a deeper, engineered base. On that fill the water table is high and the soil is prone to liquefaction, so we excavate to stable material, lay a geotextile separator and compacted aggregate, and dewater during construction. Skip those steps and you get exactly the uneven, heaving driveway that’s so common on the east side. This is the layer most installers gloss over until it fails. Call (833) 997-7759 to talk through your lot.
Driveway replacement runs about $5,900 – $16,520, and a new paver driveway installation runs $8,260 – $21,240. The site’s base requirements are the biggest swing factor – bay-fill lots cost more than the bedrock lots west of El Camino. Call (833) 997-7759 for an exact number on your driveway; estimates are free and written line-item.
Efflorescence is mineral salt drawn to the surface by moisture, and it can be cleaned – but if you only clean it, it returns. The real fix is stopping the moisture that carries the salts up, usually a drainage or joint-sand issue. We diagnose the source before treating the surface so it stays gone through the damp months. Call (833) 997-7759 for a moisture assessment.
They can be, with proper restraint. On a slope, every paver is trying to slide downhill, so edge restraint, base compaction and drainage become critical, and we often add a step or check the transition at the top. The hillside neighborhoods west of El Camino see this a lot. A failed slope is a safety issue, not just an eyesore, so it’s worth getting inspected. Call (833) 997-7759 and we’ll look at it.
Service Areas Near South San Francisco
We also work in Brisbane and the surrounding Peninsula communities, and we serve neighboring towns such as Daly City and Burlingame. If you’re just outside the South San Francisco city line, reach out and we’ll confirm coverage. Most of the South San Francisco service area and nearby towns fall within a short drive, and our estimates are free wherever we work. For Unilock projects, we treat the whole corridor between these cities as one service region.
Book Your Unilock Service in South San Francisco Today
Unilock work in South San Francisco comes down to two things: the right product and the right base. Get both and your driveway or patio holds up through the fog, the wind, and the wet winters. Get one wrong and you’ll be calling someone else in a year. Call (833) 997-7759 for a free, written-line-item estimate, backed by our 730-Day Done Right Promise. We’re an independent Unilock Unilock service provider for the entire South San Francisco service area.
Written by the team at Groundwork Construction Co. of Oakland.