Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Oakland Owner’s Guide
We install IKO bathroom remodeling systems in Oakland at a typical installed cost of $9,000 to $28,000 for a full bath, and smaller scope work like a tub-to-shower conversion starts around $3,500 to $10,000. IKO makes the waterproofing layer that sits behind your tile, so when it goes, you usually don’t see it first. You see the symptom: a soft, hollow-sounding tile on the shower wall, a grout line that keeps turning dark a week after you clean it, or a water stain spreading across the ceiling in the room below. By the time a tile pops loose or the floor feels spongy near the drain, the waterproofing has already been failing for months.
Which IKO Models This Applies To
IKO’s bathroom line centers on its waterproofing membranes and sheet membranes for wet areas, and the part that matters most in an Oakland bathroom is the membrane behind the shower tile and the pre-formed drain flange and corner pieces that tie into it. The specific product numbers are stamped on the paper backing or printed on the roll core, and the flange size must match your existing drain body or the seal won’t hold. That’s the compatibility gotcha most owners miss: a drain flange that’s close but not the right diameter (they come in standard sizes that differ by millimeters, not inches) will seat until the first hot shower, then pull free. Our technicians have up to 12 years of experience reading those labels and matching the right piece. We are an independent service provider and are not affiliated with IKO. When the OEM piece is discontinued or backordered, a quality aftermarket membrane from a comparable brand will do the same job if the thickness and fleece backing match; we don’t cut corners on the waterproofing because that’s what protects everything above and below it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
Waterproofing failures announce themselves in a few predictable ways. Here’s what to watch for:
- Dark grout that won’t stay clean. This usually means moisture is wicking up from behind the tile, not sitting on the surface – a sign the membrane has lost its seal.
- Hollow tile in the shower or tub surround. Tap it with a screwdriver handle; a dull thud instead of a solid click means the thin-set has separated from the membrane.
- Water stains on the ceiling below. The clearest evidence of a failed pan or membrane, and the one that costs the most to ignore in an Oakland two-story.
- A spongy or soft floor near the drain. Water has been sitting under the tile long enough to rot the subfloor, which means the repair just got bigger.
- Peeling caulk at the shower corners and base. Recaulking hides it for a few weeks, but repeated failure points to movement and moisture behind the joint.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full bathroom remodel with new waterproofing in Oakland runs $9,000 to $28,000. A small bathroom remodel lands at $5,000 to $12,000, a walk-in shower installation runs $4,500 to $12,000, and a tub-to-shower conversion comes in at $3,500 to $10,000. Shower replacement alone is $3,000 to $8,500, and a vanity upgrade adds $800 to $3,000. What drives the range: the square footage of wet area, whether the subfloor needs repair, tile selection, and whether plumbing has to move. We quote parts and labor as separate line items so you see exactly what the waterproofing costs versus the tile and fixtures. Upfront pricing means the number you approve is the number you pay, and every job carries our 730-Day Done Right Promise. We also partner with KraftMaid, Cambria, and Silestone for vanity and finish options, and you can take $1,000 off projects over $10,000 with 0% financing for 18 months.
DIY or Call Us?
You can safely pull the drain grate, check for standing water in the weep holes, and look at the label on the membrane backing to identify your part. That’s about where DIY stops paying off. Waterproofing is a system, and a membrane laid with the wrong overlap, the wrong thin-set, or a flange that isn’t sealed to the drain will look fine on day one and leak by month six. In an Oakland bathroom, a failed membrane means tearing out the tile again, so the savings evaporate fast. We handle the diagnosis, the parts match, and the install with background-checked, uniformed technicians. Call (833) 997-7759 to schedule your free estimate.
FAQs
How long does IKO bathroom waterproofing last? A properly installed IKO membrane system typically holds 20 to 30 years indoors, but in Oakland’s damp winters with poor bath ventilation, expect the low end unless the fan is running every shower.
Can I repair a failing membrane instead of replacing it? Sometimes a localized seam or corner can be patched if the failure is caught early, but once water has reached the subfloor or the ceiling below, a full replacement is the only repair that lasts. Call (833) 997-7759 for an exact quote – estimates are free.
How long does a bathroom remodel with new waterproofing take? Most full bathrooms in Oakland take one to three weeks depending on tile and plumbing scope, and we’ll give you a written schedule before we start.
How do you source the right IKO part? We read the product code off your existing membrane or flange, confirm the size against the drain body, and order the OEM piece or a spec-matched aftermarket equivalent. If you’re unsure what you have, we identify it during the free estimate. Call (833) 997-7759 to get on the schedule.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.