Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Oakland Owner’s Guide
Tamko-compatible bathroom remodeling in Oakland runs $9,000 to $28,000 installed for a full renovation, with small bathrooms landing between $5,000 and $12,000. We install shower surrounds, waterproofing systems, tile backing, and the wet-area components that sit behind the finished surfaces. When something underneath gives out, most Oakland owners don’t see it coming: a shower pan starts weeping at the edges, grout lines open up faster than they should, or a soft spot shows up underfoot a few steps from the drain.
Groundwork Construction Co. of Oakland is an independent service provider. We aren’t affiliated with Tamko, but our technicians have up to 12 years of experience working with their wet-area and waterproofing products alongside KraftMaid, Cambria, and Silestone finishes.
Key Takeaways
- Full Oakland bathroom remodels with Tamko-compatible systems: $9,000 – $28,000.
- Small bathroom remodels: $5,000 – $12,000.
- Most of the cost isn’t the waterproofing membrane – it’s the tile, labor, and the demolition behind it.
- We pull the permits, and the work is covered by our 730-Day Done Right Promise.
Which Tamko Models This Applies To
Tamko’s residential line covers a few product families that show up in Oakland bathrooms: their waterproofing membranes and underlayments, shower pan liners, and tile-setting accessories. The part numbers on the packaging won’t survive a renovation – they’re printed on boxes that end up in the dumpster. What matters for a replacement is the substrate underneath, not the brand on the box.
Here’s how to identify what you’re working with:
- Check the subfloor tag or starter strip if any of the original packaging is still stapled near a joist or inside a wall cavity after a partial demo.
- Measure the membrane thickness with calipers – Tamko waterproofing runs in specific mil ranges that need to match what’s under the current tile.
- Photograph the drain flange and weep holes before demo. The drain brand determines which pan liner will actually seal.
- Look for a date stamp on the felt or membrane edge – helpful when the same product family has had spec revisions over the years.
OEM vs. aftermarket is a real decision here. Tamko’s own membranes match their published specs exactly, which matters for permits and inspections in Oakland. Quality aftermarket equivalents can work, but they don’t automatically meet the same California Building Code references unless the manufacturer publishes a matching evaluation report. Ask for that report in writing before agreeing to a substitute.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
Water doesn’t announce itself. By the time a Tamko membrane or pan liner fails visibly, the damage underneath has usually been building for months. These are the symptoms we see most often on Oakland jobs:
- Grout cracking along shower floor edges. The pan liner has likely shifted or lost adhesion, letting movement telegraph through the tile bed.
- Soft spots in the subfloor near the drain. Water is getting past the weep holes or a compromised membrane seam, and the wood underneath is soaking.
- A musty smell that comes and goes. Trapped moisture behind the tile feeds mold in the wall cavity, especially in Oakland’s older Victorians and bungalows with limited bathroom ventilation.
- Loose tile with hollow-sounding thuds underfoot. The thinset or membrane layer has delaminated, usually from repeated wet-dry cycling.
- Staining on the ceiling below the bathroom. This is the loudest signal – membrane failure that has already breached the floor assembly.
One important note: newer Oakland bathrooms with tight modern construction trap moisture differently than the 1920s-era homes in neighborhoods like Rockridge or Temescal. Older homes often need more aggressive venting, not just a membrane swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodeling in Oakland runs $9,000 to $28,000 for a full renovation. Small bathrooms land between $5,000 and $12,000. Here’s how a Tamko-adjacent job breaks down:
| Scope | Installed Range | What’s Included |
|---|---|---|
| Small bathroom remodel | $5,000 – $12,000 | Demo, waterproofing, tile, standard fixtures |
| Full bathroom remodel | $9,000 – $28,000 | Demo, membrane, tile, shower pan, fixtures, permits |
| Walk-in shower installation | $4,500 – $12,000 | Pan, liner, tile, glass, drain |
| Tub-to-shower conversion | $3,500 – $10,000 | Demo, framing adjustments, liner, tile |
| Shower replacement | $3,000 – $8,500 | Remove old, new pan, membrane, tile |
What drives the range: existing plumbing condition, whether the tile needs to be fully removed or can be skimmed, and the finish tier you choose. We price parts and labor as a single number, upfront, with the exact membrane and drain spec written into the quote. The work is covered by our 730-Day Done Right Promise. Call (833) 997-7759 for an exact quote on your Oakland bathroom – estimates are free.
DIY or Call Us?
Some checks are safe to do yourself. Sniff for moisture, tap along tiles for hollow spots, watch the ceiling below during a long shower. If the drain is slow or gurgling, a simple auger is fine.
What you shouldn’t do yourself is pull the shower pan or open the subfloor to investigate. Waterproofing systems – Tamko’s included – depend on the weep holes, the pre-slope, and the membrane seam all working together. A single missed weep hole or a seam that isn’t properly lapped creates a leak that won’t show for a year. Add in Oakland’s older plumbing and the permit requirement, and this is a job for someone who can stand behind the result. We don’t carry parts on a truck because there’s no truck – we source the correct spec per job.
If a slow leak has already stained the ceiling below, stop using the shower and call us. Live person, 24/7, no voicemail: (833) 997-7759.
FAQs
A properly installed Tamko membrane or pan liner typically lasts 15 to 25 years, but a poorly installed one can fail within 3 years in a wet shower floor. The membrane itself isn’t usually the weak point – the connections at the drain, corners, and seams are. Call (833) 997-7759 for an exact quote.
Sometimes yes. If the membrane is intact and the leak is at the drain gasket or a failed seal, a targeted repair can work and usually runs under $1,500 on a Tamko system. If the subfloor is soft or the membrane has torn, full replacement is the only fix that holds. We diagnose before recommending. Pricing: free estimates.
A shower pan and membrane replacement typically takes 3 to 5 days including tile and cure time. A full bathroom remodel runs 2 to 4 weeks in Oakland depending on permit turnaround and tile complexity. Call (833) 997-7759 to schedule a free estimate.
We match the membrane and drain to your existing substrate spec, not the packaging. That means measuring mil thickness, matching the drain flange brand, and confirming the replacement meets Oakland permit specs. We source OEM when spec compliance requires it and quality aftermarket when it doesn’t – always with the evaluation report in writing. Call (833) 997-7759 – estimates are free.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.