A Groundwork company - serving Oakland, CA

Tamko Windows & Doors in Oakland, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The Oakland Owner’s Guide

We install Tamko-compatible windows and doors throughout Oakland, and most full window replacements land between $4,500 and $15,000 depending on count, frame condition, and glass package. Tamko parts themselves are usually sourced within a few business days, and single-unit swaps are often finished in one visit. Groundwork Construction Co. of Oakland is an independent service provider, not affiliated with Tamko, so we match the part to your label rather than any house brand.

Call (833) 997-7759

Owners usually find the failure the same way: a bedroom window that won’t latch as the rainy season hits, a door that drags on its threshold after a summer of expansion, or a fogged double-pane that showed up one morning in a Rockridge bungalow. By the time you’re searching for the part number, the symptom has been building for months.

Which Tamko Models This Applies To

Tamko’s residential window and door line covers vinyl new-construction and replacement units, aluminum-clad options, and patio door systems. The part you need is tied to the unit series, not the brand logo on the glass. Start at the manufacturer label on the top or side of the sash frame, or inside the head jamb on doors. That label carries the series code, the glass package, and often the original build date. Measure the visible glass and the frame opening separately; on Tamko units a quarter-inch difference matters because the sash profile and weatherstrip channel are matched to the frame.

The OEM-versus-aftermarket call is where Oakland owners lose money. Tamko OEM hardware (locks, rollers, balances, weatherstrip) fits without modification but takes longer to source. Quality aftermarket equivalents cost less and often install the same day, but only if the profile matches, and a lot of cheap knockoffs don’t. We check the label, measure, and tell you which route actually matches your unit. We also work alongside KraftMaid, Cambria, and Silestone on projects where cabinets or counters sit close to a door opening and the trim line has to be reworked.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

  • Fogging or condensation between the panes. The insulated glass seal has failed and moisture is trapped inside. In Oakland’s marine air, that seal breaks down faster than in dry climates – a common call we get along the flats near Lake Merritt.
  • A door that drags or sticks. Thermal expansion and a sagging hinge or roller. If the door catches at the bottom and the frame is plumb, the hardware is the culprit, not the wall.
  • Drafts around the sash or door edge. Worn weatherstrip or a failed sweep. Cheap to fix, but it’s the reason your heating bill creeps up in winter.
  • Latch or lock that won’t engage. A misaligned strike or a worn keeper. Small part, real security gap.
  • Water staining on the sill or frame interior. Failed perimeter sealant or a blocked weep channel. Left alone, it rots the rough opening behind the trim.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Oakland runs $4,500 to $15,000 for typical whole-home counts, and impact-rated installation where required runs $8,000 to $25,000. What drives the range: number of units, frame condition once we open the wall, glass package, and whether trim or stucco repair is needed. We quote line items, not a lump sum, so you see parts, labor, disposal, and finish work separately.

  • Single sash or door hardware swap: usually the low end of the range above; parts dominate.
  • Full unit replacement: higher end, includes removal, new unit, trim, and sealing.
  • Warranty: every project is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.

Prices are upfront and firm. The number you see is the number you pay.

DIY or Call Us?

An owner can safely check the label, measure the glass and frame, and test a lock or sweep by hand. That’s the useful part of diagnosis. Where DIY goes wrong on Tamko units: forcing a sash out of a vinyl frame cracks the jamb, swapping a balance on a tilt-in sash without the right tool bends the pivot shoe, and re-sealing a door threshold without addressing the rough opening traps water behind the trim. None of it is deadly, but it’s expensive to unwind. Most parts we install happen in a single visit. If the label’s missing or the measurements don’t square, that’s the moment to get a trained eye on it. Call (833) 997-7759 and we’ll walk you through the label check before we ever roll a vehicle.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch