Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Oakland Owner’s Guide
We install and repair Boral driveway and paver systems across Oakland, and a full paver driveway installation here typically runs $7,000 – $18,000 installed, while paver patio work lands at $3,500 – $11,000. Repair of a failed section, settled run, or cracked unit is often a smaller, single-visit job depending on what’s underneath. We’re an independent service provider, not affiliated with Boral, but our technicians have up to 12 years of experience working with the brand’s clay and concrete paver lines.
Oakland owners usually discover the problem the same way: a paver heaves out of plane after a wet winter in the Oakland Hills, a hairline crack spreads across a driveway slab in Temescal, or the sand joints wash out along a slope in Rockridge and the whole field starts shifting. By the time you notice one, the base or the jointing is usually already telling you something.
Which Boral Models This Applies To
Boral’s paver lineup splits into two families that behave differently here. The clay brick pavers (think the classic tumbled and straight-edge lines) are fired units with tight dimensional tolerances, and they hold color through Oakland’s sun without fading. The concrete paver lines (the larger-format and textured series) are cast and come in modular sizing that has to match your existing field exactly if you’re patching a section rather than replacing a whole run.
To identify the right unit, measure a single paver in millimeters across face length, width, and thickness, and note the surface texture and edge profile. Boral’s clay bricks run on a standard modular footprint; the concrete series vary more, and a near-match that’s 2 – 3mm off will telegraph through the joint line. The OEM-versus-aftermarket call matters here: for a visible repair on a front driveway, matching the OEM Boral unit is worth it for color and dimension. For a hidden or base-layer repair out back, a quality concrete paver of the same thickness is a legitimate, less expensive substitute.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Heaving or rocking units. One or more pavers lift and move underfoot because water has reached the base and the bedding sand has washed away. In Oakland this shows up first on slopes and near downspouts.
- Cracked or spalled faces. Surface flaking or a crack running across the paver comes from freeze-thaw cycling, heavy point loads, or a base that flexed. A single crack is often cosmetic; a cluster means the base is failing.
- Washed-out joints. Missing polymeric sand between units lets water in and weeds up, and it’s the most common early warning we see. Left alone, joint loss leads to edge creep and shifting.
- Settling along the edges. A sunken border or a paver run that dips where it meets the garage apron signals edge restraint failure or eroded base. This is where a small repair snowballs if it isn’t caught.
- Efflorescence and staining. White mineral bloom or dark patches point to moisture trapped in the base or mortar, not just surface dirt. It’s a moisture problem masquerading as a cleaning problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Oakland, a full paver driveway installation runs $7,000 – $18,000, and a driveway replacement (removing and rebuilding the base) is $5,000 – $14,000; a comparable concrete driveway comes in at $4,500 – $12,000. Paver patio installation is $3,500 – $11,000, and resealing or refreshing joints on an existing surface is a modest $250 – $700. We quote parts and labor as separate line items so you can see exactly what a repair costs versus a rebuild.
The range is driven by base condition (the real cost driver in most Oakland repairs), square footage, removal and haul-off, and whether we’re matching an existing Boral unit. Every job is covered by our 730-Day Done Right Promise, and the number you see on the quote is the number you pay, with no change orders sneaking in mid-job.
DIY or Call Us?
You can safely handle the low-risk checks: pressure-rinse a small test area, sweep sand back into a joint that’s just thinned out, and pull one loose paver to inspect the sand base beneath it. That tells you whether it’s a top-layer fix or a base problem.
Where owners get into trouble is resetting a whole run without proper compaction, guessing at base depth, or patching with the wrong-thickness paver that never seats right. On slopes, that’s not just cosmetic; it’s a tripping hazard and a drainage problem that will find its way to your foundation. If a paver is rocking underfoot or water is pooling, that’s base work, and it’s worth a professional eye. Call (833) 997-7759 and we’ll walk you through what you’re seeing before anything gets torn up.
FAQs
A properly installed Boral paver system lasts 25 – 50 years or more, and the clay brick lines hold their color and dimension far longer than many cast units. The pavers themselves rarely fail; the base and jointing system are what determine longevity in Oakland’s wet winters.
Yes, and that’s usually the smarter spend when the failure is isolated to a few units or one edge. We lift the affected pavers, rebuild the base and bedding sand, reset the matching Boral unit, and re-sand the joints. A field that’s settled broadly is a rebuild conversation, not a patch.
An isolated repair is often a single-visit job finished the same day, while a larger section rebuild or full driveway install takes several days depending on square footage and base work. We give you a clear timeline with the written quote.
We measure your existing unit, order the matching Boral profile and thickness, and verify dimensional fit before install so the joint line reads clean. Call (833) 997-7759 for a free estimate and we’ll confirm the exact match for your driveway. We also work with KraftMaid, Cambria, and Silestone across our other service lines.
If your Boral driveway is heaving, cracking, or losing its joints, don’t wait for a small repair to become a full rebuild. Call (833) 997-7759 for a free estimate, upfront pricing, and a live person on the line any hour. From foundation to finish line, we handle the base, the pavers, and the guarantee in writing.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.