Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Oakland Owner’s Guide
PGT driveway and paver systems fail mostly at the joints and the base, not the surface. Repairing the affected section in Oakland typically runs $250 – $700 for resealing and joint repair, while a full paver driveway installation runs $7,000 – $18,000 and a concrete driveway $4,500 – $12,000. We’re an independent contractor, not affiliated with PGT, and we install and repair PGT-compatible driveway and paver systems across Oakland.
Most owners discover the problem the same way: a paver shifts underfoot after a heavy rain, or a hairline crack in the driveway widens through the summer dry season. The joints start holding water instead of draining it, and the base underneath begins to settle unevenly. In Oakland’s clay-heavy soils, that settlement shows up fast, especially on sloped driveways in the hills where water concentrates at the low corner. You’ll notice weeds pushing through the seams, sand washing out, and a slight dip that catches puddles long after the rain stops.
Which PGT Models This Applies To
PGT paver and driveway systems come in several product families, and each one uses different joint sand, edge restraint, and base specifications. The part that matters most is the edge restraint and the joint sand grade. If your original installation used polymeric joint sand, swapping in plain mason sand will wash out within a season in Oakland’s wet winters, and the pavers will spread at the edges.
To identify the right replacement, check three things: the paver dimensions (width and thickness in millimeters or inches stamped or molded on the underside), the base depth your original spec called for, and whether the edge restraint is the spike-and-plate style or the adhesive style. Driveway pavers are typically thicker than patio pavers, and using patio-grade thickness in a driveway is a compatibility error that shows up as cracked pavers within one or two rainy seasons.
OEM versus aftermarket: for the joint sand and edge restraint, a quality aftermarket product that matches the spec performs as well as the original and often costs less. For the pavers themselves, matching the original PGT profile and color from the same production run matters, because dye lots vary and a patched section from a different run will read as a visible scar. Measure the paver face, note the thickness, and photograph the joint sand texture before you call anyone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- Pavers shifting or rocking underfoot. The bedding sand layer has thinned or migrated, usually from water running under the surface. That shift signals the base is no longer holding the pavers in plane.
- Joint sand washing out after rain. Water is channeling through the joints instead of sheeting off the surface. In Oakland, this accelerates on driveways that slope toward the street without a proper drain.
- Weeds growing in the seams. Thin or missing joint sand lets seed settle. Left alone, roots pry pavers apart and widen the gaps further.
- Hairline cracks spreading across a paver face. Often the paver was under-thickness for a driveway load, or the base beneath it settled. Cracks that appear in a cluster point to a localized base failure.
- Ponding water or a soft dip at the edge. This is the clearest sign of base settlement. In the Oakland hills, sloped driveways settle at the low corner first, and that edge dip is where the failure starts spreading inward.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the installed range for PGT-compatible driveway and paver work in Oakland. These figures include materials, base prep, labor, and disposal.
| Job | Installed Range (Oakland) |
|---|---|
| Driveway sealing and joint repair | $250 – $700 |
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
What drives the range: square footage, base condition (full excavation versus a light re-grade), slope, and whether you need drainage added. We give you a written line-item quote that separates materials from labor, so you see exactly what the pavers cost versus the install. Every job carries our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
A few checks are safe to do yourself. Walk the driveway after rain and note where water pools. Photograph the joint sand and the edge restraint. Measure the paver thickness. Pull a loose paver and look at the sand bed underneath to see if it’s still there.
Where DIY goes wrong: re-sanding without fixing the drainage underneath means the new sand washes out in one wet season. Replacing a section of pavers without matching the base depth creates a dip that cracks pavers within a year. And a full driveway replacement involves excavation, base compaction, and grading, which are not a weekend project. If the failure is a spreading edge dip or cracked pavers, call a professional. Our technicians have up to 12 years of experience with driveway systems, and we’ll tell you straight whether you need a repair or a replacement. Call (833) 997-7759 and a live person answers, 24/7.
FAQs
How long does a PGT paver driveway last in Oakland? A properly installed paver driveway with a compacted base and quality joint sand lasts 20 to 30 years. In Oakland, the base matters more than the paver: clay soil and winter rain are what shorten lifespan, and a base built to spec is what holds up.
Can the joint repair be done instead of a full replacement? Yes, in most cases. If the pavers themselves are intact and only the joint sand or edge restraint has failed, resealing and re-sanding runs $250 – $700 and solves it. Replacement is only necessary when pavers are cracked or the base has settled. Call (833) 997-7759 for a free estimate – we’ll tell you which one you actually need.
How long does a paver swap take? A joint repair or reseal takes most jobs a single visit. A full driveway replacement typically runs one to three days depending on square footage and base prep. We give you the timeline in writing before we start.
How do you source the right PGT-compatible pavers? We measure the face dimensions, thickness, and color from your existing installation, then match the profile and production run. We’re an independent contractor, so we source from trusted brand partners like Belgard alongside others, and the written quote tells you exactly which product goes in.
Ready to stop guessing whether your driveway needs a patch or a rebuild? Call (833) 997-7759 for your free project estimate and design consult. A live person answers 24/7, and we’ll give you upfront pricing with no surprises, backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.