A Groundwork company - serving Oakland, CA

CGI Windows & Doors in Oakland, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Oakland Owner’s Guide

We install CGI-compatible windows and doors for Oakland homeowners, and most replacements land between $4,500 and $15,000 installed depending on the scope; impact-rated units run $8,000 to $25,000. If your door is dragging, a fogged pane has clouded over, or a window won’t latch, the part is usually the problem, not the frame. We can typically schedule a free estimate quickly, and a single failed sash or door slab often gets handled in one visit.

Call (833) 997-7759

Owners rarely discover this on a schedule. It shows up as a draft that wasn’t there last winter, condensation between the panes, a soft spot in the sill, or a door that needs a shoulder to close. In Oakland, where a lot of CGI product went into homes during the 1980s and 1990s, we see the failure points cluster: seals dry out, glazing breaks down, and hardware loses its adjustment after a couple of decades of marine air.

A quick note: Groundwork Construction Co. of Oakland is an independent service provider. We’re not affiliated with CGI, and we don’t claim to be. We install and repair CGI-compatible components sourced through verified suppliers.

Which CGI Models This Applies To

CGI windows and doors span a lot of product lines, and getting the right part means matching the series, not just the opening. Most of what we see in Oakland falls into three categories: vinyl single-hung and double-hung windows, sliding patio doors, and hinged entry or French doors. The glazing on pre-2000 vinyl units is often dual-pane with a sealed spacer; the hardware is typically a specific brand of sash lock, roller, or hinge that has to match the routing pattern in the frame. A generic replacement roller will fit a CGI sliding door track, but it won’t match the original screen channel, and that’s where a “close enough” part fails in a year.

To identify your part, look at the etched label on the glass (usually a corner code with a date), the manufacturer sticker inside the jamb or on the head track, and measure the visible glass and the frame overall. The OEM-versus-aftermarket call for CGI comes down to two things: whether the series is still supported and what the seal quality looks like. For older CGI units, OEM availability narrows, and a quality aftermarket equivalent with a matching thermal break and a comparable U-factor is often the smarter buy. For current-series product, we source OEM where it’s available.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

Five symptoms we run into constantly in Oakland homes:

  • Fogging or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture into the air space. Once that happens, the glass won’t clear on its own and the unit needs replacement, not a wipe-down.
  • Drafts around the sash or door edge. Weatherstripping has compressed or the sash has dropped out of square, breaking the seal line. A draft at the meeting rail or along the latch side usually means both.
  • A door that drags or sticks. Hinges have sagged or the frame has shifted with seasonal movement. In older Oakland homes on expansive clay soils, a slight foundation shift is often the root cause, and it shows up at the door first.
  • Water staining or soft wood at the sill. The sill pan or flashing has failed and water is getting behind the frame. This one is the most urgent because it can rot the framing behind the wall.
  • Hardware that won’t lock or latches loosely. The lock mechanism, roller, or striker has worn. A window or door that won’t secure isn’t just an inconvenience, it’s a security gap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for CGI-compatible window and door work in Oakland:

  • Window replacement: $4,500 – $15,000, depending on count, size, and whether it’s a like-for-like swap or a retrofit with new trim.
  • Impact window installation: $8,000 – $25,000, driven by unit count and the impact-rating spec.
  • Single failed insulated glass unit (IGU) or sash: typically at the low end of the range, since it’s a targeted swap rather than a full-frame replacement.

The range is driven by how many openings are involved, whether the frame or flashing needs repair behind the unit, and the glazing spec. We give you a written, line-item quote with parts and labor broken out, so the number you see is the number you pay. No change orders mid-job from vague scopes. All work is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.

DIY or Call Us?

You can safely check the labels, measure the opening, and clean and lubricate the hardware. You can tighten a hinge screw or replace a sash lock that matches exactly. What we’d steer you away from is pulling a sealed glass unit or re-setting a door frame yourself. Glass under stress can crack, and a frame set out of plumb will leak at the first big rain. In Oakland, where the winter storms hit hard and sideways, a flashing mistake means water in the wall, which is a much bigger bill than the original job.

If the part is glass, sill, or frame-related, it’s worth having it looked at by someone who does it every week. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. Call (833) 997-7759 to schedule your free estimate.

FAQs

How long does a CGI window or door last? A CGI vinyl window typically lasts 20 to 30 years, and the insulated glass unit inside it often fails first, around the 15 to 20 year mark. In Oakland’s coastal air and seasonal humidity swings, we see seals go earlier on west- and south-facing exposures.

Can a failing part be repaired instead of replaced? Often, yes. A failed sash lock, roller, hinge, or weatherstripping can be replaced on its own. A fogged IGU can be swapped without replacing the whole frame in many cases. We’ll tell you honestly when a repair is the right call and when a replacement makes more sense long-term. Call (833) 997-7759 for an exact quote; estimates are free.

How long does the swap take? A single sash or glass unit swap is often a one-visit job. A full door or window replacement depends on the count and whether the frame needs work; we give you a realistic timeline in the written estimate, not a guess on the phone.

How do you source the part? We source through verified suppliers, matching the CGI series and glazing spec to the original where possible, and using quality aftermarket equivalents when OEM isn’t available. We check the seal, thermal break, and hardware routing before it goes in. Call (833) 997-7759 and we’ll walk through your model and options.

Whether you’re matching one failed sash or replacing a set of aging windows and doors, the first step is a free estimate. Call (833) 997-7759 and we’ll get your Oakland home back to sealed, secure, and working the way it should. We also service KraftMaid, Cambria, and Silestone products across our other trade lines if your project expands beyond windows and doors.

Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch