Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Oakland Owner’s Guide
We install CGI-compatible kitchen remodeling packages in Oakland, and a full kitchen remodel runs $14,000 to $45,000 installed, depending on cabinet run length, countertop material, and how much layout work your older Oakland home needs. A smaller scope (cabinet refacing, counter and backsplash only) lands nearer $9,000 to $20,000. Most of these jobs are planned and scheduled, not same-day, because cabinetry and stone need accurate field measurements before anything gets ordered.
Owners usually discover the problem slowly. A cabinet door that stops closing flush. A drawer that grinds halfway out. A seam in the countertop that starts catching a fingernail. Then a soft spot under the sink that wasn’t there last spring. In Oakland’s older housing stock – the 1920s bungalows off Fruitvale, the post-war ranches in the Laurel, the split-levels up in Montclair – the failure is rarely one part. It’s the hinge, the drawer glide, the laminate edge, and the forty-year-old framing behind them all letting go at once.
Which CGI Models This Applies To
“CGI” gets used loosely, so the first thing we do on a site visit is identify what’s actually installed. Older CGI cabinetry lines ran standard 24-inch-deep base boxes in 3-inch width increments, which means a replacement door or drawer front from a different generation often misses by a quarter inch and won’t sit flush. That’s the compatibility gotcha that costs Oakland homeowners the most time: they order a part by eye, it arrives close but not right, and the return window closes before the installer can confirm fit.
How to identify your line before you buy anything:
- Look for the label. Most CGI boxes carry a sticker inside the door or on the back panel with a model and series code. Photograph it before it fades further.
- Measure the box, not the door. Width, height, and depth of the cabinet carcass – not the face – is what matches a part to a model.
- Check hinge bore spacing. European-style concealed hinges are drilled at set centers; a metric-pattern door won’t line up on an imperial-pattern box.
On the OEM-versus-aftermarket call: for hinges, glides, and shelf pins, a quality aftermarket equivalent from a known hardware maker is often as good or better than the original and costs less. For door fronts and any part that has to match a finish, go OEM or don’t go. A mismatched sheen on one door in a ten-door run is visible from across the room, and no amount of touch-up hides it.
We’re an independent service provider, not affiliated with CGI. We also work with KraftMaid, Cambria, and Silestone when a repair turns into a partial or full replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
These are the five symptoms we see most often in Oakland kitchens, and what’s actually going on underneath each one:
- Doors that sag or rub the frame. Worn hinge cups or stripped screw holes in particleboard. Once the screw holes oval out, tightening the screw buys you a week, not a fix.
- Drawers that stick or drop on one side. A failed glide or a bent runner. In Oakland’s damp winter air, wood boxes swell slightly and accelerate glide wear on the downhill side.
- Countertop seams that catch or darken. Failed seam adhesive or water getting under a laminate edge. Left alone, moisture wicks into the substrate and the counter starts to cup.
- Soft or discolored cabinet floor under the sink. Slow plumbing seep, usually at the supply line or disposal flange, not a burst pipe. The cabinet floor is the first thing to go and the last thing anyone notices.
- Backsplash tile lifting or grout cracking at the counter line. Movement between the cabinet run and the wall, common in older Oakland homes where the framing has settled unevenly.
Two or more of these together usually means the cabinet run itself is past patching, and that’s when a partial remodel makes more financial sense than chasing parts one at a time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen work runs in Oakland, installed, with parts and labor broken out honestly:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet run length and box quality, whether the layout moves (plumbing and electrical relocation is the single biggest cost swing), countertop material (laminate to Cambria quartz is a wide spread), and whether the walls behind the old cabinets are straight. In a 1920s Oakland bungalow, they usually aren’t.
The number you see is the number you pay. We quote line-item and we hold it – no change orders for surprises we should have caught at the walkthrough. All work is covered by our 730-Day Done Right Promise, and we pull the permits and pass the inspections. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
DIY or Call Us?
Here’s the honest split. You can safely tighten a hinge screw, swap a drawer glide if you’ve matched the pattern exactly, re-caulk a counter seam, and replace a disposal flange gasket. Those are real homeowner jobs and we’ll never talk you out of them.
Where DIY goes wrong is anything behind the cabinet face. Moving a cabinet run means hitting live wiring and supply lines that aren’t where the last remodeler left them – very common in Oakland’s older homes, where a previous owner’s “improvement” is often not to code. Cutting into a wall to reframe for a new box, relocating a gas line for a range, or pulling a permit: those need a licensed trade, and a mistake there is a fire risk, not a cosmetic one. If you’re past the hinge-and-glide stage, call us at (833) 997-7759 and we’ll tell you straight whether it’s a repair or a remodel.
FAQs
How long do CGI kitchen cabinets last? Fifteen to twenty-five years is typical for the boxes, with hinges and glides failing closer to the ten-year mark and door finishes showing wear by year twelve. In Oakland’s damp coastal air, expect the shorter end of that range unless ventilation in the kitchen is good.
Can it be repaired instead of replaced? Often yes, if the boxes are sound and only hardware or one door front has failed. A hardware and door-front refresh runs far less than a full remodel. Call (833) 997-7759 and we’ll give you a straight answer after a look – estimates are free.
How long does the swap take? A hardware and door-front refresh is usually a single visit. A full cabinet and counter replacement runs one to three weeks depending on stone fabrication lead time. Call (833) 997-7759 for a schedule that fits your kitchen.
How do you source the part? We identify your CGI model from the label and box measurements, then source OEM where finish matching matters and quality aftermarket where it doesn’t. We don’t stock parts and we don’t carry them on a truck – we order to your specific kitchen. Call (833) 997-7759 to start with a free estimate.
Ready to stop chasing parts one at a time? Call Groundwork Construction Co. of Oakland at (833) 997-7759 for a free project estimate and design consult. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every project is backed by the 730-Day Done Right Promise. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.