Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Oakland Owner’s Guide
We install CGI-compatible driveway and paver systems throughout Oakland, and most full paver driveway projects here run $7,000 – $18,000 installed, with concrete alternatives at $4,500 – $12,000. Most Oakland owners don’t discover a failing driveway base until the pavers start rocking underfoot or a depression shows up after the first real rain. By then the bedding layer has usually shifted, and you’re looking at more than a cosmetic fix.
Here’s what matters: CGI makes a solid paver and hardscape product line, but the part that fails first is almost never the paver face. It’s what’s underneath it. In Oakland’s clay-heavy soils and hillside lots, a base that wasn’t compacted to spec will telegraph every problem upward within a few seasons.
Key Takeaways
- Paver driveway installation in Oakland runs $7,000 – $18,000 installed; concrete runs $4,500 – $12,000.
- CGI paver failures are usually base failures, not product failures.
- We’re an independent installer, not affiliated with CGI.
- Every project is backed by our 730-Day Done Right Promise.
Which CGI Models This Applies To
CGI’s paver line covers several profiles and thicknesses, and matching the right replacement paver to your existing field starts with identification. Most CGI pavers are stamped or stamped-marked on the underside with a series or profile code, and the box or pallet label from your original install (if you still have it) will list the exact profile, color, and thickness. Standard CGI driveway pavers are typically 2 3/8 inches thick for vehicular use; thinner 1 5/8-inch units are patio-grade and shouldn’t go in a driveway. That’s the compatibility gotcha that bites Oakland homeowners most often: pulling a patio-thickness paver into a driveway repair because it looked like a match.
If you can’t find a label, measure the length, width, and thickness of several pavers in the field and photograph the surface texture. We match those specs against current CGI profiles and their quality aftermarket equivalents. On the OEM-versus-aftermarket question, CGI’s own pavers are the cleanest color and profile match for a repair. For a full replacement, an equivalent aftermarket paver from a verified supplier often costs less and performs the same, and we’ll tell you plainly when that’s the smarter call. We don’t claim to stock parts or carry pavers on a truck; every material is sourced for your specific project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
The symptoms below are the ones we see most in Oakland, and each points to a specific cause worth understanding before you spend anything.
- Pavers rocking or shifting underfoot. The bedding sand has washed out or the base wasn’t compacted to spec. Once units move, the joints open and water gets in faster.
- Depressions or dips in the driveway surface. Usually subgrade settlement in clay soil, common on Oakland hillside lots where drainage concentrates. A dip isn’t cosmetic; it holds water against the base.
- Joint sand washing out after rain. Failed polymeric sand or missing edge restraint lets water escape sideways and erode the bedding layer. If your edges are open, the whole field is vulnerable.
- Efflorescence or white haze that keeps returning. Moisture migrating through the pavers from a saturated base. Cleaning treats the symptom; the moisture source is the real problem.
- Heaved or uneven pavers near trees or downspouts. Root pressure or concentrated roof runoff lifting units. Oakland’s rainy winters push this failure along fast when drainage wasn’t designed in.
Replacement Cost & What’s Included
Here’s what driveway and paver work typically runs in Oakland, installed:
| Project | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, base depth and soil conditions, drainage corrections, edge restraint, and paver profile. A hillside Oakland lot that needs subgrade work and a drainage fix lands higher than a flat grade with a sound base. You get upfront pricing, no surprises, and a written line-item quote before we start. Every driveway project carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a safe split here. You can check joint sand, look for rocking units, and photograph any dips. That information helps us quote accurately, and it costs you nothing.
Where DIY goes wrong: pulling up pavers to “fix” a dip and re-sanding without addressing the base. Nine times out of ten the dip comes back within a season, because the underlying settlement was never corrected. Base repair means excavation, proper compaction in lifts, and edge restraint set correctly, which is heavy, precise work. Getting the base wrong is how a $15,000 driveway becomes a $20,000 problem. If your pavers are moving, call (833) 997-7759 and we’ll diagnose it correctly the first time. Estimates are free.
FAQs
A properly installed CGI paver driveway should hold up 25 to 30 years or more, but that lifespan depends almost entirely on the base and drainage. Oakland’s wet winters and clay soils stress a poorly prepped base far faster than the pavers themselves wear out. Call (833) 997-7759 for an honest assessment of what’s actually failing.
Often yes. Isolated rocking pavers or a single dip can sometimes be lifted, re-based, and re-sanded, which runs a fraction of a full replacement. If more than a small section is moving or the base is compromised across the field, a partial fix usually just delays the full job. We’ll tell you which situation you’re in.
Most residential paver driveways in Oakland take several days to a week or more once materials arrive, depending on square footage and how much base and drainage work is needed. Larger or hillside lots run longer. Painting an exact timeline matters to us, so we’ll give you a real schedule in your estimate, not a guess.
We identify your existing CGI profile by label, markings, or field measurements, then match it against current CGI profiles and verified aftermarket equivalents. Because we’re an independent installer and not affiliated with CGI, we recommend whichever option gives you the best color match and value. We also work with KraftMaid, Cambria, and Silestone on other parts of the home. Call (833) 997-7759 to start.
Get Your Free Estimate
If your CGI driveway or pavers are showing any of these signs, a proper diagnosis is the first step, and it won’t cost you anything. Groundwork Construction Co. of Oakland brings background-checked, uniformed technicians to every job, and our phones are answered by a live person 24/7. We’re proud to serve our local communities and bring the same written guarantees to every project. Call (833) 997-7759 today for a free project estimate and design consult. Take advantage of $1,000 off projects over $10,000 and 0% financing for 18 months. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.