Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Oakland Owner’s Guide
We install Oldcastle driveway and paver systems throughout Oakland, and replacement runs $7,000 – $18,000 for a paver driveway and $3,500 – $11,000 for a paver patio, with most replacement work scheduled within days of your estimate. The part that usually fails first isn’t the paver itself – it’s the bedding sand, the polymeric joint sand, or the edge restraint that holds the field together. Oakland owners tend to notice it after a wet winter: pavers rocking underfoot, joints washing out onto the sidewalk, or a rut forming where the driveway meets the street. That’s a system failure, not a cosmetic one, and it gets worse with every rain.
We’re an independent installer and not affiliated with Oldcastle; we work with their paver lines and with the base materials that make them last in the East Bay.
Which Oldcastle Models This Applies To
Oldcastle’s hardscape line covers a wide spread of paver families, and the compatibility question depends on which one is in your yard. The common residential series in Oakland are the interlocking and slab-style units sold under names like the Holland, Brittany, and the larger slab profiles – each with its own thickness, face dimension, and recommended joint width. Getting the match right starts with measuring, not guessing.
Here’s how to identify what you have:
- Measure the thickness. Residential pavers are typically 2 3/8 inches; driveways rated for vehicle loads often run 2 3/4 inches or more. That half inch decides whether a replacement unit matches your existing field or stands proud of it.
- Measure a single unit’s face and note the color family. Oldcastle runs the same profile in several blends, and dye lots shift year to year.
- Check the edge restraint and base depth. A 2 3/8-inch paver on a 4-inch compacted base is a patio. A driveway needs a deeper, properly compacted aggregate base.
On the OEM-versus-aftermarket call, we usually source matching Oldcastle units where the profile is still in production. Where it isn’t, a quality aftermarket paver of the same thickness and joint width works fine for a repair – the base and joint sand matter more than the brand on the face of the unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
Paver problems show up early if you know what to look for. These are the five we see most in Oakland:
- Pavers rocking when you step on them. The bedding sand has washed out or the base wasn’t compacted in lifts. A rocking paver is a loose paver, and it will crack within a season or two.
- Joint sand washing out after rain. Either the joint sand was never polymeric or it was swept in dry and never activated with water. Oakland’s wet-season runoff finds every gap.
- Edge restraint lifting or separating. The plastic or concrete edge that locks the field in place has heaved, usually from root pressure or a shallow base at the border. Once the edge goes, the whole field spreads.
- Weeds in the joints and moss on north-facing units. Shade plus our coastal moisture – West Oakland and the hills get this more than the flats. It signals failed joint sand, not just a maintenance issue.
- Settlement or rutting where the drive meets the street. Usually a drainage problem: water pooling at the apron and undermining the base. Repaving without fixing the grade just moves the failure downhill.
One spec worth knowing for Oakland: pavers set on a base that wasn’t compacted in 2-to-3-inch lifts will settle unevenly within two or three wet seasons, regardless of the paver brand. The base is the part you can’t see and the part that decides whether the job lasts twenty years or six.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what paver work runs in Oakland, with parts and labor together:
| Job | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves you up or down the range: total square footage, how much existing base has to be excavated and hauled off, whether the edge restraint and drainage need rebuilding, and access – a narrow Oakland driveway off a steep hill costs more to work than a flat one. We give you a written line-item quote so you see the units, the base, the joint sand, and the labor as separate lines. Upfront pricing, no surprises: the number you see is the number you pay. Every job carries our 730-Day Done Right Promise, and if it’s not done right, we make it right.
DIY or Call Us?
An honest split. You can safely check for rocking units, measure your paver thickness and the depth of exposed base, sweep out a joint to see whether the sand is polymeric, and photograph the edge restraint. That tells you what failed. What you shouldn’t take on yourself is rebuilding the base or re-setting a driveway field – that means excavating, compacting aggregate in lifts, cutting the edge, and re-sanding, and a shallow or under-compacted base is exactly why the first set failed. Done wrong, a DIY reset looks fine in July and ruts by February.
We handle the base, the restraint, the joint sand, and the units as one system, and most jobs are completed in a single visit. Call (833) 997-7759 to schedule your free estimate – the phone is answered by a live person, 24/7.
FAQs
How long do Oldcastle pavers last in Oakland? The pavers themselves can last 25 to 50 years; the system around them is what fails sooner. In Oakland’s wet-season cycles, bedding sand and joint sand typically need attention in 5 to 10 years, and the base holds up only if it was compacted properly to begin with. Call (833) 997-7759 for an exact quote – estimates are free.
Can I repair a section instead of replacing the whole driveway? Yes, often you can. If the base is sound and only a section has settled or lost joint sand, we replace the affected units and re-set that area with matching thickness and color. If the whole field is rocking or the edge has failed, a full re-set is the honest answer. Call (833) 997-7759 and we’ll tell you which one you’re looking at.
How long does the swap take? A small section repair is usually a single visit. A full paver driveway re-set runs two to four days in Oakland, depending on the square footage and how much base has to be excavated. We give you the schedule in writing before we start. Call (833) 997-7759 for your free estimate.
How do you source the right Oldcastle paver? We match on thickness, face dimension, and color family, then confirm the profile is still in production. If your exact Oldcastle series has been discontinued, we source a quality equivalent in the same thickness and joint width – the base and joint sand drive the durability. Call (833) 997-7759 and we’ll talk through your options.
When you’re ready, call (833) 997-7759 for a free estimate. We also install and service KraftMaid, Cambria, and Silestone across our other trades, so one contractor can handle the whole job from foundation to finish line.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.