Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Oakland, CA: What It Costs and How Long It Takes
A new wood fence in Oakland, CA typically runs $3,500 to $9,000, with most standard residential jobs landing in the $4,500 to $7,000 range for 100 to 150 linear feet of cedar or redwood. A straight run of dog-ear cedar on good soil can be torn out and rebuilt in two to four days. Sloped lots in the hills, gates, and removal of an old fence push it toward a week. Call (833) 997-7759 for a free on-site estimate with a written line-item quote.
How we build a wood fence here, stage by stage
Every job follows the same sequence, and the schedule shifts with what the ground and the old fence hand us. Here’s what actually happens.
- Stage 1: Site walk and layout (day 1, about an hour). We mark the property line against the plat or a recent survey, confirm where the fence sits relative to setback requirements, and check for sprinkler lines, gas stubs, and buried conduit before anyone swings a shovel. This is when you decide the fence height and whether any section gets a gate. If you don’t have a survey, we flag that before we dig; a fence built over the line is a fight you don’t want.
- Stage 2: Removal and post setting (day 1 into day 2). Old posts come out, usually with a small auger and some prying, and we haul the debris. New posts go in at 6 to 8 feet on center, set in concrete, and that concrete needs a cure before anything hangs on it. In our mild climate, 24 hours is the practical minimum. On older Oakland properties, this is where we find the surprises: root-bound soil, a buried footing from a fence two owners ago, or a rusted-out galvanized post that crumbled in the hole.
- Stage 3: Framing the rails (day 2 or 3). We set rails level on the grade line and pitch, checking plumb on each post. This is the stage that determines whether the fence looks straight for the next 20 years. On sloped lots in the Oakland hills, we step the panels rather than rack them, which is more work and looks better.
- Stage 4: Picking and hanging the boards (day 3 or 4). You choose the board profile and grade before this stage: dog-ear, flat-top, or a shadowbox layout; cedar or redwood; 1×6 versus 1×4. We hang from a line, nail or screw into the rails, and cut the top rail line.
- Stage 5: Gate hang and final walk (day 4). Gate hardware gets set, the gate swings and latches, and we walk the run with you. Touch-ups and any punch items get done before we leave.
Every project arrives with the 730-Day Done Right Promise behind it. If a post heaves or a board warps in a way it shouldn’t, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The wood fence options you’ll actually choose between
Most of the decisions here get made in the first conversation, and each one moves the price. Here’s the honest trade-off on the choices that matter.
- Cedar vs. redwood vs. pressure-treated pine. Western red cedar is the default for a reason: it resists rot and insects without chemical treatment, holds stain well, and looks right against Oakland’s older homes. It costs more than treated pine. Redwood is the premium option; it’s more dimensionally stable and takes a natural finish beautifully, but it’s the most expensive per board foot. Pressure-treated pine is the budget route and the fastest to weather gray – fine for a utility fence, less so for a front-yard showpiece.
- Board grade and thickness. You’ll see “select” or “clear” grade, which is nearly knot-free and more expensive, versus a “tight-knot” or “#2” grade that’s cheaper and shows more knots and occasional wane. For a fence facing the street, grade matters; for a side-yard privacy run, it rarely does.
- Height and style. Six-foot is the standard residential height and the one most Oakland lots are set up for. Four-foot looks airier and costs less in materials. Above six feet, expect to check the local rules before you commit, since height and setback limits vary by zone.
- Panel style. Dog-ear (the arched top), flat-top, and shadowbox (boards alternating on both sides so both neighbors get a finished face). Shadowbox takes more boards and posts, so it costs more, but it’s the fair choice for a shared line.
- Fasteners and hardware. Stainless or hot-dipped galvanized ring-shank nails and screws, and good gate hinges, cost a little more and add years to the fence. We use them by default rather than as an upgrade.
If a fence is one piece of a bigger yard project, homeowners often pair it with Paver Driveways in Oakland or fresh Concrete Driveways & Concrete Work in Oakland to tie the front of the house together.
What Wood Fence costs in Oakland, CA
Plan on $3,500 to $9,000 for a wood fence in Oakland. A straightforward run on level ground sits near the low end; hillside lots, complex gates, and premium wood push it higher. Here’s how the variables break down.
| Line item | Typical Oakland range |
|---|---|
| New cedar fence, 100-150 linear ft, installed | $3,500 – $9,000 |
| Hillside lot or stepped panels (premium) | add 15-25% of project |
| Gate (single, hung and latched) | included to add $600 |
| Old fence removal and haul-away | included to add $400 |
The five variables that move the number:
- Linear feet and post count. More posts on a curved or broken line means more concrete, more labor, and more material.
- Site access. A tight side yard where we can’t get a wheelbarrow through means more hand-carrying and slower work.
- Old fence condition and ground. Root-bound soil, a buried footing, or an old fence that was never set in concrete all add labor.
- Wood grade. Select cedar and redwood sit at the top of the range; treated pine at the bottom.
- Permits, if required. Where the local rules call for a permit, the fee and inspection time get folded into the quote.
A written estimate from us lists every line, so the number you see is the number you pay. What’s included: materials, removal, post setting, framing, board installation, and gate hardware. What’s usually not: a survey, stump grinding, or repairs to a damaged retaining wall a fence would sit on. Those get quoted separately and in writing. Call (833) 997-7759 for an exact number on your run.
See the difference
Before
After
Before
After
Before
AfterWhat Oakland homes specifically do to a wood fence
The housing stock here changes the job. Oakland is dominated by detached and semi-detached homes built between 1900 and 1940 – Victorian row houses, Craftsman bungalows, and stucco-clad Mediterranean revivals – and that means we regularly find a property line that’s drifted, a buried foundation from an outbuilding long gone, and fences that were never set in concrete. On those older lines, the digging goes slower and we plan for it in the quote. The other big factor is dry-rot. Oakland’s mild climate lets exterior work happen year-round, but the cool, damp coastal air also lets rot and pest damage progress quietly behind a fence that looks fine from the street. When we pull old boards, we often find posts rotted at the soil line and rails that crumbled in hand, especially on any fence facing west toward the fog off the bay. This is one of the reasons our new fences get stainless or hot-dipped galvanized fasteners: the same damp that eats an old pine post eats a standard steel nail fast. And on lots in Rockridge or Temescal, we work around the same century-old wiring, unpermitted additions, and old footings that show up on every job in those blocks. This is the local reality a Fence Installation in Oakland project has to plan for, and it’s what we quote against. We cover all of Oakland and the surrounding neighborhoods.
Serving Oakland, CA – Our Local Coverage Area
We serve Oakland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Wood Fence in Oakland
A standard residential run takes two to four working days, from removal through the final walk. Sloped lots, heavier gates, or a larger property can push it to about a week. Call (833) 997-7759 to get an exact timeline for your yard.
Often not, but it depends on the fence height, where it sits relative to the property line, and the zone the lot is in – so it’s worth confirming before you commit. We check the local rules as part of every estimate and tell you plainly whether a permit is needed. Call (833) 997-7759 and we’ll sort it out.
Yes. Cedar and redwood read naturally against Victorian and Craftsman homes, and we can match the board profile, height, and finish so a new run looks like it was always there. We can also tie the fence into the wider project if you’re renovating – it’s often part of a full Fence Installation scope that includes gates, posts, and staining. Call (833) 997-7759 for a free estimate.
Every wood fence we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship: the post setting, the framing, the hang. Materials hold their own manufacturer warranties. Call (833) 997-7759 to talk through the details.
No. Your written estimate is the price, and you get an upfront number before we start. If the dig turns up something that genuinely changes scope – a buried footing, a rotted post we couldn’t see – we stop and quote it in writing before we proceed. That’s how upfront pricing, no surprises, works. Call (833) 997-7759 to schedule your free estimate.
Get a free wood fence estimate in Oakland
Call (833) 997-7759 to schedule a free on-site estimate for a wood fence in Oakland. We answer live, 24/7, and we’ll walk the line with you, measure it, check the permit question, and hand you a written quote itemized by material and labor. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Straight answers, no pressure.
Written by the team at Groundwork Construction Co.