Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Alameda: What It Costs and How Long It Takes
New vanities, tile and fixtures in Alameda typically run $9,000 – $28,000 and take three to six weeks once materials are on site, depending on how far you’re pushing the layout. Most of that span is a vanity swap with new tile and fixtures in one existing bathroom; relocating plumbing or expanding the floor plan pushes you toward the top. Call (833) 997-7759 for a free on-site estimate and we’ll walk the room with you, measure, and put a real number in writing.
How We Run This Job, Stage by Stage
Vanities, tile and fixtures aren’t a coat of paint. The sequence matters, and knowing what happens on day one versus day ten keeps you from being surprised by a bathroom that’s torn up for a month.
Stage 1: Walkthrough and decisions. We spend the first visit nailing down the vanity footprint, tile selections, and fixture rough-in. You’ll make the big calls here: vanity size and style, tile layout, faucet style. In Alameda, most of that first meeting is spent checking what’s behind the existing wall.
Stage 2: Demo and rough-in. Old finishes come out and the working parts get exposed. This is where a vanity swap either stays simple or reveals old plumbing or wiring. Figure one to three days for demo depending on what’s under the surface.
Stage 3: Prep and waterproofing. Subfloor leveling, cement board, and a waterproofing membrane over the wet areas. This is the unglamorous stage nobody photographs and it’s where a tile job holds up or doesn’t. One to two days.
Stage 4: Tile and vanities. Wall and floor tile go in, then the vanity sets and the fixtures get installed. Your tile layout choice (running bond, herringbone, large-format) sets the pace. Three to five days is typical.
Stage 5: Final touches. Grout, caulk, mirror, hardware, and a walkthrough with you to check every edge and seam. One day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
These are the selections that drive your budget and your maintenance down the road.
- Vanity construction: Furniture-grade painted or stained wood holds up and takes a countertop custom-fit. Stock options are quicker and cheaper but the seams show. KraftMaid and Wellborn both give you real cabinetry at manageable price points.
- Countertop material: Quartz (Cambria and Silestone) resists water and stains and needs zero sealing – the practical pick for a bathroom where wet hands land constantly. Natural stone looks warmer but wants periodic sealing, especially with the damp marine air here.
- Tile type: Porcelain is dense, cheap to maintain, and forgives moisture. Ceramic is lighter on cost but less durable. Natural stone (travertine, marble) is beautiful and noble but wants sealing and careful drainage planning.
- Tile format: Large-format floor tile means fewer grout lines to scrub – good in an Alameda bathroom that sees humidity. Small mosaics work on shower floors where slope matters.
- Fixtures: Standard chrome fixtures are reliable and budget-friendly. Brushed nickel or matte finishes look better longer but cost more. Salt air and marine humidity here punish cheap plating; solid brass bodies outlast the bargain bin.
What Vanities, Tile & Fixtures Costs in Alameda, CA
Plan on $9,000 – $28,000 for the full vanity, tile and fixture package in a typical Alameda bathroom. A vanity-only swap with new counter and fixtures lands near the bottom; a full gut with relocated plumbing, custom cabinetry, and premium tile pushes the top.
Here’s what moves the number:
| Item | Typical Range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Wall & floor tile set | $2,500 – $7,000 |
| Fixtures (faucet, shower valve, drain, hardware) | $600 – $2,200 |
| Waterproofing & prep | $800 – $2,500 |
| Plumbing relocation (if needed) | $1,200 – $4,000 |
| Old tile removal & haul-away | $500 – $1,800 |
The variables that push a job up: whether plumbing or electrical has to move, the condition behind the wall, whether the tile runs floor-to-ceiling, and how premium your cabinetry and countertop grade is. A written estimate from us includes demo, prep, labor, materials we supply, permits where required, and clean-up. It doesn’t include structural surprises uncovered mid-demo – those get a change order you approve first, in writing, no surprises. Our pricing is upfront with 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Alameda’s Housing Stock Does to This Job
Work on the main island (94501) and you’re almost always dealing with Victorians, Queen Annes, and Craftsmans from the 1880s to the 1930s, many over raised crawlspaces. Pull a vanity out of one of those bathrooms and behind it you’ll find galvanized supply lines and knob-and-tube wiring. That’s the real reason a “simple” vanity swap in Alameda can run over its first estimate – the plumbing is due for replacement while the wall is open, and pretending otherwise is how contractors end up burying old pipe behind new tile.
Over on Bay Farm Island (94502), homes from the 1960s to ’80s have slab foundations and aluminum wiring. Aluminum wiring at a bathroom fixture means a proper pigtail connection or the fixture won’t be safe long-term, and that has to be checked, not assumed. Coastal salt air and marine humidity also corrode cheap fixture finishes and hardware faster than anywhere inland. Soft-story ground floors on the old Victorians matter too, though that’s usually a separate structural call.
Serving Alameda, CA – Our Local Coverage Area
We serve Alameda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Alameda
Three to six weeks of active work for a single bathroom, once materials arrive. Custom cabinetry alone can add two to four weeks of lead time before we start, so order early – that timing call is the biggest schedule decision you’ll make. Call (833) 997-7759 and we’ll map out a real timeline for your room.
Cosmetic tile and a like-for-like vanity swap usually don’t require a permit, but moving plumbing, electrical, or walls does, and Alameda’s permitting runs against a historic-preservation and seismic overlay that can affect the review. We handle the paperwork and inspections when they’re required. Call (833) 997-7759 and we’ll tell you exactly what your scope triggers.
Yes, and staying in place is the fastest, lowest-cost path. Keeping the vanity footprint and fixture locations means we skip rough-in work and stay closer to the $9,000 end. Call (833) 997-7759 for an exact quote – estimates are free.
The full package lands between $9,000 and $28,000, with a vanity-only job near the low end and a full gut with relocation near the ceiling. Call (833) 997-7759 for a free on-site estimate – the number we write down is the number you pay.
All of our work is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Cabinetry and fixtures also carry their manufacturers’ warranties. Call (833) 997-7759 with any warranty question before you book.
Get a Free On-Site Estimate for Vanities, Tile & Fixtures
Give us a call at (833) 997-7759 to schedule your free on-site estimate for vanities, tile and fixtures in Alameda. A live person answers any time, and on the call we’ll ask a few questions about your bathroom, then set a time to measure and put a written line-item quote in your hands. No pressure, no hidden numbers, and a 730-Day Done Right Promise behind the finished work.
Written by the team at Groundwork Construction Co.