Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Alameda, CA: What It Costs and How Long It Takes
A wrought iron fence in Alameda typically runs $3,500 to $9,000 installed, and most residential runs are finished in three to five working days once the layout is set and permits are cleared. The job covers layout, post-hole excavation through island soil, setting posts in concrete, hanging panels and gates, then a rust-inhibiting primer and finish coat. Call (833) 997-7759 for a free on-site estimate before you commit to a number.
How We Build an Iron Fence, Stage by Stage
This is not a job where you hand over a check and hope. You’ll know what’s happening each day, and you’ll make three or four decisions along the way that shape both the look and the final bill.
Day 1: Measure, mark, and confirm the run
We walk the property line with you, mark every post location, and confirm where the fence meets your house, a gate, or a shared boundary. This is when you decide height (4-foot, 5-foot, or 6-foot is standard) and gate swing direction. On older Alameda lots, property lines sometimes don’t match the plat; we flag that now, not after concrete is poured.
Day 2: Utility locate and excavation
Before a single shovel goes in, the utility locate gets called and marked. On an island packed with century-old service lines, this step matters. Posts go down 24 to 36 inches depending on frost depth and soil, and we set them in concrete. Here’s the honest part: high groundwater means some holes fill with water before the pour, and we handle that with proper drainage and pier technique rather than rushing. You decide nothing here except to trust the crew that does it right.
Day 3: Set posts and hang panels
Concrete needs to cure before we load it. Once it’s set, panels and gate frames go up, and we check every gate for clearance and swing. You’ll walk the run with us and flag anything that doesn’t look level or square.
Day 4 – 5: Finish coat, cleanup, and walkthrough
Iron needs protection, especially near the Bay. We apply a rust-inhibiting primer and finish coat, then clean the site and walk the finished fence with you. Any touch-ups get logged and done before we call the job complete.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Iron fencing is not one product. What you pick changes the price, the lifespan, and how the fence reads against your house. Here’s what we walk through with Alameda homeowners:
- Powder-coated steel vs. hand-forged wrought iron: Powder-coated steel is the budget-friendly, low-maintenance pick and holds up well to salt air, but it dents. Genuine wrought iron is heavier, repairable, and ages with character, but it costs meaningfully more and needs periodic recoating.
- Panel height and picket spacing: A 4-foot decorative run suits a front-yard boundary. A 6-foot run with tighter picket spacing (under 4 inches) is the safer choice with kids or pets, and the extra material shows up in the price.
- Finish and rust protection: Standard primer plus finish is fine inland, but marine air eats fasteners and hardware fast. We spec stainless or hot-dip galvanized fasteners on Bay-facing runs, a small line item that saves you a repair call later.
- Gate hardware: Manual latch, self-closing hinge, or an automatic opener. You’ll decide now, because gate framing has to match the hardware.
- Mount style: Surface-mounted posts on an existing slab versus core-drilled footings in soil. Slab mounting is faster but only works where the slab is sound.
What Iron Fence Costs in Alameda, CA
The short answer: $3,500 to $9,000 for a typical residential iron fence in Alameda. The low end is a shorter, straightforward powder-coated steel run on level ground. The high end is a longer run of wrought iron with a wide gate and lots of excavation.
| Line item | Typical range |
|---|---|
| Standard residential run (powder-coated steel) | $3,500 – $6,000 |
| Hand-forged wrought iron run | $6,000 – $9,000 |
| Single gate installation | $600 – $1,800 |
| Rust-inhibiting finish upgrade | $250 – $700 |
| Extra post or panel (added run) | $150 – $450 each |
Five things push a job toward the high end: run length, terrain (sloped or rocky ground means more digging and pier work), existing fence demo and haul-away, material grade, and gate complexity. A written estimate from us itemizes posts, panels, gates, finish, and demo separately, so you can see exactly where the money goes. We don’t hand over a lump-sum number and hope it sticks.
See the difference
Before
After
Before
After
Before
AfterWhat Alameda Homes Specifically Do to This Job
Alameda is an island, and that shapes every iron fence we build here. The main island (ZIP 94501) is full of 1880s – 1930s Victorians and Craftsmans, many sitting on raised foundations where an iron fence has to work around soft-story structure and uneven grade. Bay Farm Island (94502) is mostly 1960s – 80s tract homes on slabs, and there a surface-mounted fence on a sound slab is a real option that saves money. The whole island sits on filled marsh and Bay mud, so we hit water at shallow depth in West End yards and plan drainage into the post holes. Coastal salt air corrodes fasteners and hardware faster than most contractors plan for, which is why we spec galvanized or stainless hardware on Bay-facing runs. If a property falls inside a historic district, we confirm fence height and style before we order material. Homeowners replacing a fence sometimes pair this with Patios, Walkways & Pool Decks in Alameda, and those adding an outbuilding often pair it with ADU Design & Permitting in Alameda. This work is part of the wider Fence Installation in Alameda scope, and if you want to see everything we handle, start with our fence installation service across Alameda.
Serving Alameda, CA – Our Local Coverage Area
We serve Alameda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Alameda
Most residential iron fence runs in Alameda take three to five working days from layout to finish coat, with concrete cure time built in. Larger runs or jobs needing significant excavation and dewatering can stretch to seven days.
It depends on height and location. A low decorative front-yard run may not need a permit, while a taller or front-yard fence in a historic district often does. We confirm the requirement for your specific property during the estimate and pull what’s needed.
In most cases, yes. On Bay Farm Island slabs and already-paved yards, surface-mounted posts avoid full demolition, and we protect plantings and walkways during excavation. Where footings are needed, we limit disruption to the post line.
Plan on $3,500 to $9,000 for a typical residential run, with gates and finish upgrades adding to that. Call (833) 997-7759 for an exact quote, estimates are free.
Every iron fence we install is covered by our 730-Day Done Right Promise. If something isn’t right with the workmanship, we make it right within that window.
Get a Free Iron Fence Estimate in Alameda
Call (833) 997-7759 to schedule a free on-site estimate for your iron fence in Alameda. A live person answers around the clock, and we’ll walk the property line, talk through your options, and hand you a written, itemized number with no change-order surprises. Nothing gets ordered until you sign off. Reach out and let’s get the layout right.
Written by the team at Groundwork Construction Co.