Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Emeryville, CA: What They Cost and How They Hold Up
Custom & Geometric Windows in Emeryville are built to order – arched, angled, trapezoidal, circular or full wall systems that don’t come off a shelf – and a typical job runs $8,000 – $25,000 depending on count, geometry and glazing, with most homes finished in 4 – 8 weeks from template to final trim. Call (833) 997-7759 for a free on-site estimate.
How a custom window actually gets built, start to finish
We don’t guess at a shape and hope it lands. The sequence below is what a real job looks like from the first visit to the last bead of caulk, with the decisions you own at each stage.
Stage 1: Measure and template (day 1, 90 minutes to 3 hours)
We measure the rough opening, check the wall for plumb and square, and photograph the surrounding framing, stucco or siding. For an arch or a radius, we build a physical template on site rather than trusting a tape measure – a 1/4-inch error at the sill becomes a 2-inch gap at the crown of a 6-foot arch. You’ll decide the opening size and glass configuration here.
Stage 2: Order and lead time (weeks 1 – 4)
Custom units are fabricated to the template. Lead time on a radius or trapezoid window typically lands in the 3-to-6-week range depending on finish and glazing; standard rectangular customs come in faster. You’ll confirm finish, glass package and hardware during this window – change orders after fabrication starts usually mean a re-order.
Stage 3: Prep and demo (day 2, half a day)
We protect the interior, pull the old unit, and inspect the framing and sheathing behind it. On older Emeryville wood-frame homes this is where we find rot, dried-out flashing or missing header blocking – we photograph everything and quote the repair before we close it up, not after.
Stage 4: Set, flash and seal (day 3, 3 – 5 hours per opening)
The unit gets shimmed, anchored, insulated and flashed in the correct order: sill pan, jamb, head, then the exterior weather barrier lapped over the flange. We don’t skip the sill pan on a bay-facing wall, and we don’t rely on caulk to do a flashing’s job.
Stage 5: Trim, glass and inspection (days 3 – 5)
Interior casing and exterior trim go on last, then the inspection if the permit requires one. You’ll walk the opening with us and check operation, latch alignment and drainage before we call it done – and the finished work rides on the 730-Day Done Right Promise, so if something isn’t right we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Every custom window is a series of trade-offs. Here’s what actually gets decided at the kitchen table, and what each choice costs you in money or maintenance.
- Wood-clad frames (Andersen, Marvin): warm interior, aluminum-clad exterior that shrugs off marine air. The go-to for geometric shapes because the frames can be fabricated to any radius. Highest cost, longest life.
- Vinyl and hybrid systems (ECO Window Systems, ViewLux): the practical choice for most Emeryville budgets. Holds up well to salt fog, no painting, but a vinyl frame can’t bend to every radius, so arch and circle work is limited to available bending profiles.
- Fiberglass: strongest against impact and temperature swing, but the finish options are thinner. Suits bay-front openings that take wind and debris.
- Glass package: tempered on any unit within 18 inches of the floor or in a door, laminated impact glass where wind-borne debris is a concern. Low-E coatings pay back fastest on west and south-facing geometry that catches afternoon sun.
- Finish and trim: factory-applied exterior finishes hold color longer than field paint near the shoreline; interior casing in paint-grade or stain-grade wood changes the look and the price by hundreds per opening.
What Custom & Geometric Windows cost in Emeryville, CA
Plan on $8,000 – $25,000 for a typical custom or geometric window project in Emeryville. The range is wide because the geometry is.
| Line item | Typical range |
|---|---|
| Single custom rectangular or angled unit, installed | $1,400 – $3,200 |
| Radius, arch or full-circle unit, installed | $2,200 – $4,800 |
| Large full-wall geometric system (3 – 5 units) | $8,000 – $25,000 |
| Framing, flashing or rot repair found during demo | $300 – $2,500 |
| Interior/exterior trim and finish | $200 – $600 per opening |
What pushes a job toward the high end: complex geometry requiring a physical template and custom fabrication, an opening that has to be enlarged or reframed, impact or tempered glazing, premium clad finish, and any structural or permit-driven change. What keeps it lower: standard rectangles with a custom-looking grille pattern, fewer units, and existing openings that are sound when we open them up. A written estimate lists the unit cost, labor, trim, disposal and the permit line separately – so you see what’s included. Change orders only happen when we find something behind the wall and you approve the fix first; the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Emeryville homes specifically do to this job
Emeryville is a small, built-out city where almost every project is infill – former warehouse and industrial parcels converted to housing, biotech or retail, often on cleaned-up ground with Bay Conservation and Development Commission oversight anywhere near the shoreline. That history shapes what we find behind a wall. West of San Pablo Avenue, the early-1900s worker cottages and bungalows have original rough framing that’s rarely plumb after a century, so a geometric window often means reframing the opening before the unit goes in. The mid-century industrial shells now being adapted have steel and heavy timber framing that behaves differently and can hit buried tanks or undocumented fill during a site visit. And the marine air off the bay accelerates corrosion on exposed steel and painted exterior finishes, which is why we spec aluminum-clad or factory-finished units on bay-facing elevations and schedule any exterior work between April and October, ahead of the November-to-March rain. This is work we run across Emeryville and the surrounding ZIPs 94608 and 94662. If the window project is part of a larger envelope upgrade, it sits naturally alongside Windows & Doors in Emeryville, and homeowners often pair this with Concrete Driveways & Concrete Work in Emeryville or Asphalt Driveways & Resurfacing in Emeryville when the exterior is already torn up.
Serving Emeryville, CA – Our Local Coverage Area
We serve Emeryville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Emeryville
Yes, in almost every case. Replacing a window in-kind sometimes falls under a minor repair, but changing the size, opening, or structural header on a custom or geometric unit generally requires a building permit through the City of Emeryville, and windows in the shoreline zone can trigger additional review. We pull the permit and handle the inspection – you don’t chase paperwork. Call (833) 997-7759 and we’ll tell you exactly what your opening needs.
Expect 4 to 8 weeks total, most of it fabrication lead time. The on-site work is fast – a single custom unit is usually set in a day, and a full-wall geometric system takes 2 to 3 days. The 3-to-6-week order window is what you’re planning around, so don’t wait until a storm is forecast to start. Call (833) 997-7759 for a timeline on your specific openings.
Sometimes, and it’s always worth checking first. If the existing rough opening is square and sound, we can template a unit to fit it exactly – no header change, no reframing, lower cost. If the wall has settled or the opening has to grow to fit the geometry you want, that’s a framing change and adds to the scope. Our estimate tells you which one you’re in before you commit.
Most projects land between $8,000 and $25,000, with a single custom unit starting around $1,400 installed and a large full-wall system at the top of the range. Geometry, glazing, finish and any framing repair are the four variables that move the number. Call (833) 997-7759 for an exact quote – estimates are free and itemized.
Our workmanship is covered by the 730-Day Done Right Promise, and the window unit itself carries the manufacturer’s warranty on glass, frame and hardware. If a seal fails or a latch misaligns inside that two-year window, we come back and make it right. Call (833) 997-7759 to schedule your free estimate and we’ll walk you through both warranties in writing.
Get a free estimate on Custom & Geometric Windows in Emeryville
Call (833) 997-7759 to schedule a free on-site estimate for custom & geometric windows in Emeryville. A live person answers around the clock, so you’re not leaving a voicemail and waiting until Monday. We’ll measure the opening, template the geometry, talk through glass and finish options, and hand you a written, itemized quote with the permit line and lead time spelled out. No surprise change orders. That’s the Windows & Doors standard we hold every job to.
Written by the team at Groundwork Construction Co.