Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Berkeley: What the Job Actually Costs
Replacing a bathroom vanity, retiling a floor or shower surround, and swapping out fixtures in Berkeley typically runs $9,000 – $28,000 as part of a full bathroom scope, with a standalone vanity and fixture swap closer to $800 – $3,000. A tile-only refresh (floor plus surround) usually lands between $3,500 and $9,000 depending on square footage and material grade. Most of these jobs are done in one to two weeks once materials are on site. Call (833) 997-7759 for a free on-site estimate.
How We Run a Vanities, Tile & Fixtures Job, Stage by Stage
This work looks simple on paper. It isn’t, especially in a 1920s Berkeley bungalow where the wall behind the tile was never flat to begin with. Here’s the sequence we actually follow.
Stage 1: Measure and material selection (1 – 2 weeks before demo)
We measure the vanity alcove, check floor slope, and confirm whether the existing drain and supply lines can stay where they are. You choose the vanity (stock or semi-custom), the tile, and the fixtures during this window. Semi-custom vanities from KraftMaid or Wellborn run 4 – 6 weeks lead time, so this decision drives the whole calendar. Stock vanities ship in days.
Stage 2: Demo and inspection (day 1 – 2)
Out comes the old vanity, toilet, tile, and backer board. This is where Berkeley surprises show up: rotted subfloor near the tub, knob-and-tube wiring feeding the old vanity light, or single-wall galvanized drain lines that crumble when touched. We photograph everything and send you a written change order before proceeding. No surprise line items later.
Stage 3: Rough-in and substrate prep (day 2 – 4)
If plumbing or electrical moves, that happens now, before any tile goes down. We install cement backer board or a waterproof membrane in wet areas and flatten the floor with self-leveling compound where needed. On a 100-year-old Berkeley floor, this step is not optional. Skipping it is why so many tile jobs crack within two years.
Stage 4: Tile setting and grouting (day 4 – 8)
Floor tile first, then walls, then grout after a 24-hour cure. Large-format tile (12×24 or bigger) needs a flatter substrate and cuts slower, so budget an extra day. Mosaic and penny tile take longer to set but hide floor imperfections better in an old house.
Stage 5: Vanity set, fixtures, and final walkthrough (day 8 – 12)
Vanity goes in, countertop and sink get set, faucet and shower trim connect, caulk lines get sealed. We walk the job with you, check every drain and supply for leaks, and hand over the written workmanship warranty. All of this is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vanities, Tile & Fixtures Options You’ll Choose Between
Every decision below changes both the budget and how the bathroom holds up in Berkeley’s damp marine air. Here’s the honest version of each trade-off.
- Stock vanity vs. semi-custom: A stock 30-inch vanity runs $300 – $900 installed and ships fast. Semi-custom from KraftMaid lets you fit an odd alcove exactly and pick the finish, but runs $1,200 – $3,000 installed and takes weeks. In a Craftsman house with a nonstandard nook, semi-custom usually wins.
- Porcelain vs. ceramic vs. natural stone tile: Porcelain is denser, handles moisture better, and runs $6 – $15 per square foot installed. Ceramic is cheaper but chips easier. Marble and travertine look great and cost $15 – $40 per square foot installed, but they stain and need sealing every year or two, a real consideration in a humid bathroom.
- Quartz vs. granite countertop: Cambria and Silestone quartz are non-porous, need no sealing, and hold up to daily use. Granite is beautiful but needs periodic sealing. For a bathroom vanity, quartz is usually the smarter call.
- Faucet and shower trim finish: Chrome is durable and cheapest. Brushed nickel and matte black cost more and show water spots differently. PVD finishes outlast older electroplated ones by years.
- Frameless vs. framed shower glass: Frameless looks cleaner and costs $800 – $2,000 more. Framed glass is cheaper and easier to keep aligned in an old, out-of-square opening.
What Vanities, Tile & Fixtures Costs in Berkeley, CA
A standalone vanity swap runs $800 – $3,000. A tile refresh with new fixtures lands in the $3,500 – $9,000 range. When this sits inside a full bath rebuild, the whole scope runs Bathroom Remodeling in Berkeley territory at $9,000 – $28,000. Here’s the breakdown:
| Item | Typical Berkeley Range |
|---|---|
| Vanity installation (stock to semi-custom) | $800 – $3,000 |
| Tile floor and shower surround | $3,500 – $9,000 |
| Faucet and shower trim replacement | $400 – $1,200 |
| Shower valve and drain rough-in | $600 – $1,800 |
| Full scope with new vanity, tile, fixtures | $9,000 – $28,000 |
What pushes a job to the high end? Four things: moving the drain or supply lines, replacing rotten subfloor or framing, upgrading to natural stone or large-format tile, and adding electrical for a new vanity light or exhaust fan. What keeps it low? Keeping the plumbing in place, choosing porcelain over marble, and picking a stock vanity over semi-custom.
Every written estimate includes demo, substrate prep, waterproofing, tile setting, grout, vanity and countertop install, fixture connections, and cleanup. It does not include structural repair from hidden rot or a full electrical panel upgrade – those get quoted separately once we see them. The number we put in writing is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Berkeley Homes Specifically Do to This Job
Berkeley’s housing stock is the biggest variable here. The flats are full of 1900 – 1930 California bungalows and Craftsman four-squares, many with original knob-and-tube wiring and single-wall plumbing that simply wasn’t built for a modern vanity with a GFCI outlet and a pressure-balanced shower valve. When we open a wall in a home near the UC campus or in the Elmwood, we expect to find something that needs attention. The hills, with their 1950s – 70s ranchers and splits, have different quirks: out-of-level floors and older drain lines that have settled.
Berkeley’s seismic and green-building requirements add another layer. A tile shower pan or a relocated drain can trigger a permit and inspection, and the city is strict about what’s allowed in a habitable wet area. That’s not a reason to avoid the work, it’s a reason to work with a contractor fluent in Berkeley permitting. We pull permits and pass inspections, and we factor that into the written estimate from the start. Homes in ZIP codes 94705, 94708, and 94710 each bring their own version of this.
If your scope grows past vanities, tile, and fixtures into structural work, that’s a full Bathroom Remodeling conversation. We cover Berkeley and the surrounding hills, and homeowners often pair bathroom tile work with a roof or exterior upgrade – a good time to look at Tile Roofing in Berkeley or Specialty Roofing in Berkeley while crews are already on site.
Serving Berkeley, CA – Our Local Coverage Area
We serve Berkeley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Berkeley
Plan on one to two weeks of active work for a vanity, tile, and fixture refresh, plus material lead time if you choose a semi-custom vanity. Call (833) 997-7759 for a firm schedule in writing.
Often yes, especially if you’re moving plumbing or electrical or replacing a shower pan. Berkeley requires permits for work that touches the drain, supply lines, or waterproofing membrane. We pull the permits and handle inspections as part of the estimate.
Yes, and this is the most common way to control cost. Keep the drain and supply lines where they are, swap the vanity in the same footprint, and retile over a properly prepped substrate, and you stay near the lower end at $3,500 – $9,000.
A vanity swap runs $800 – $3,000, a tile and fixture refresh $3,500 – $9,000, and a full scope with vanity, tile, and fixtures $9,000 – $28,000. Call (833) 997-7759 for an exact written quote – estimates are free.
Every vanities, tile & fixtures installation comes with our 730-Day Done Right Promise. If something isn’t right, we come back and fix it, in writing, for two years.
Get a Free Estimate on Vanities, Tile & Fixtures in Berkeley
If you’re ready to price a vanity, tile, or fixture refresh in Berkeley, call (833) 997-7759. We’ll walk the space with you, photograph what’s behind the wall, and hand you a written line-item estimate with no surprise add-ons. A live person answers around the clock, and we’ll schedule a free on-site visit within a day or two.
Written by the team at Groundwork Construction Co.