Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Berkeley, CA: What the Job Actually Involves
Custom & geometric windows in Berkeley usually cost $8,000 – $25,000 installed and take three to six weeks from signed contract to final inspection, with the bulk of that time spent on shop fabrication rather than on your house. The work covers anything that isn’t a stock rectangle: arches, half-rounds, trapezoids, angled corner units, radius tops, and full-height geometric walls. Call (833) 997-7759 and we’ll walk your openings, check the framing, and give you a written line-item estimate before you commit to anything.
How Groundwork Runs a Geometric Window Project
Custom windows fail or succeed on the front end, not the install day. Here’s the sequence we follow, and what you’ll be deciding at each step.
1. Measure and template (day 1, roughly 2 – 3 hours on site)
We don’t order a geometric unit off a tape measure alone. Angled and arched openings get templated in place, and we run a level and a laser through the rough opening to confirm it’s actually square, plumb, and consistent. You decide the glazing pattern and the finish color at this stage; those choices are locked once the order goes to the factory.
2. Structural and trim review (days 1 – 3)
Most custom windows sit in openings that were framed for something else. We check headers, look at what’s carrying the load above, and confirm the sill is sound. If the opening needs reframing, you’ll hear about it before materials are ordered, not after demo. This is also where we check whether existing wiring or single-wall plumbing runs through the rough opening.
3. Fabrication (roughly 3 – 5 weeks)
Geometric and radius units are built to order, and that lead time is the single biggest schedule driver on the whole job. You’ll approve a shop drawing or spec sheet before the factory cuts glass. Nothing on your house changes during this window.
4. Removal and installation (typically 1 – 2 days per opening)
Demo, flashing, and setting happen together. We seal and flash to the siding, not just to the frame, because in Berkeley’s fog belt that’s where water gets in. Uniformed, background-checked technicians do the work, and the site gets cleaned at the end of each day.
5. Trim, finish, and inspection (days after install)
Interior and exterior trim go in, we check operation of every operable unit, and the job gets inspected if a permit was pulled. We walk the finished openings with you and note anything that needs adjustment before we consider it closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on a custom or geometric window come down to material, glazing, and how the unit operates.
- Wood with aluminum cladding: the most common choice for Craftsman and brown-shingle homes. Warm interior, weather-resistant exterior, and it takes paint and stain well. Higher cost, and the inside faces need periodic attention. Andersen and Marvin both build radius and arch units in this category.
- Fiberglass: holds dimension well in damp coastal air, resists rot, and suits the chronic moisture Berkeley’s fog belt throws at wood. Fewer finish options than wood, and larger geometric spans get heavy.
- Vinyl: the value option. Fine for straight runs and simple shapes; limited once you’re asking for tight radii or large trapezoids, because vinyl doesn’t bend or hold a complex profile as cleanly.
- Fixed versus operable: geometric units are often fixed (picture), which cuts cost and eliminates the leak path around a mechanism. Any unit that opens adds hardware cost and a maintenance point.
- Glazing package: a low-E coating and argon fill help on west-facing glass that takes the afternoon sun. Tinted or laminated glass is worth the upcharge where privacy or impact matters.
Where the project grows into a larger envelope or siding job, it’s usually part of a full Windows & Doors in Berkeley scope, and we’ll price it that way.
What Custom & Geometric Windows Cost in Berkeley, CA
For a single geometric or arched unit fully installed, budget $8,000 – $25,000, which is the range we hold consistent across the site. A whole-house set of six to eight custom openings lands toward the top of that band; one radius unit over a front door stays near the bottom. Here’s what moves the number:
- Size and shape complexity: a simple half-round runs far less than a multi-unit trapezoid or a true radius wall.
- Existing opening condition: sound framing costs little to work with; a soft sill or a header that needs attention adds carpentry and time.
- Material grade: wood-clad and fiberglass sit above vinyl, and finish options add to that.
- Operating hardware: fixed glazing is the economical choice; operable units add cost per opening.
- Permit scope: like-for-like swaps may not need one; changing an opening size or adding structure usually does.
A written estimate from us breaks out materials, labor, flashing, trim, and permit fees line by line, so there’s no number you can’t trace. The number you see is the number you pay. Standard promotions apply: $1,000 off projects over $10,000 and 0% financing for 18 months. Ask for a free project estimate and design consult to get the exact figure.
See the difference
Before
After
Before
After
Before
AfterWhat Berkeley Homes Specifically Do to This Job
The flats of Berkeley are full of California bungalows and Craftsman four-squares built between 1900 and 1930, and those are exactly the homes people want geometric windows for. The problem is what’s behind the wall: many still carry original knob-and-tube wiring and single-wall plumbing, so any opening that moves or grows has to be checked before demo, not during. Out in ZIP codes 94708 and 94710, and up in the hills, post-war splits and ranchers with cripple walls and soft-story garages are common, and an arched or trapezoid unit adds weight to a wall that may already want attention. The marine fog belt keeps siding damp, which is why we flash to the cladding and not just to the frame. Get this right and everything that comes after – Concrete Driveways & Concrete Work in Berkeley included – has a sound wall to work from. We cover Berkeley and nearby Albany, Emeryville, El Cerrito, and Piedmont.
Serving Berkeley, CA – Our Local Coverage Area
We serve Berkeley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Berkeley
Expect three to six weeks from signed contract to final inspection, with fabrication eating most of that time. On-site install is usually one to two days per opening. Call (833) 997-7759 and we’ll give you a schedule tied to your actual order.
Often yes. A like-for-like swap may qualify without one, but changing an opening size, adding structure, or reframing usually triggers a permit and inspection. We tell you up front which category your job falls in and pull what’s required. Call (833) 997-7759 to talk through your specific openings.
Very often, yes, especially where we can template to the existing rough opening. If the opening needs reframing or the plumbing sits in the way, we’ll catch it during the day-1 review and quote it before ordering. Call (833) 997-7759 for an on-site look.
Fully installed, $8,000 – $25,000 depending on size, shape, material, and framing condition. That range holds whether it’s one radius unit or a full set. Call (833) 997-7759 for an exact written quote – estimates are free.
Every job we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s on top of the manufacturer’s warranty on the units themselves. Call (833) 997-7759 with questions about coverage on your project.
Get a Free Estimate on Custom & Geometric Windows in Berkeley
We’ll come to you, template the openings, check the framing, and hand you a written line-item estimate with the numbers in it – no vague ranges, no change orders later. Call (833) 997-7759 to book it, or start with our Windows & Doors service if you’d like the broader picture first. A live person answers around the clock, and there’s a $1,000 credit waiting on projects over $10,000.
Written by the team at Groundwork Construction Co.