Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Full Bathroom Remodeling in Albany, CA: What It Involves and What It Costs
A full bathroom remodeling in Albany, CA typically runs $9,000 – $28,000 and takes 4 – 7 weeks of on-site work, with the higher end reflecting plumbing relocations, electrical upgrades, and a second bathroom if yours is the only one in the house while it’s out of service. That number covers a complete teardown-to-finish rebuild: demo, rough-in, waterproofing, tile, fixtures, and paint. Call (833) 997-7759 for a free on-site estimate.
How a Full Bathroom Remodeling Project Actually Runs, Stage by Stage
The order of operations is where most bathroom projects go sideways, so here’s the real sequence we follow on an Albany job, with the durations you should expect.
Stage 1: Demolition. Days 1 – 3. Everything comes out down to the studs and subfloor: old tile and tile backing, vanity and toilet, tub or shower base. That’s also when we find what the walls were hiding. A bathroom in a house from 1940 or earlier may have rot behind tile, water damage at the tub surround, or a floor that has to be replaced. You won’t have a final fixture lock-in until the demolition dust settles and you see the actual condition of the walls and floor. Call (833) 997-7759 to schedule the free estimate.
Stage 2: Rough-in. Days 3 – 7. Plumber and electrician do their work: new drain and supply lines, exhaust fan, GFCI circuits, vanity lighting. This is when you decide whether to relocate the toilet or move the tub drain, and each move adds cost because it’s the most expensive part of the project.
Stage 3: Inspection and close-up. Day 7 – 10. The rough-in gets inspected, then we close the walls. Nothing should get closed up before the inspection is signed off. If your house needs a panel replacement to support the new electrical load, that’s scheduled here too.
Stage 4: Waterproofing, tile, and finishes. Days 10 – 30. Cement board or a foam shower system goes in, then waterproofing. Tile install, grout, and the vanity, toilet, and fixtures follow. You’ll pick tile, grout, and fixture finishes before this stage starts, and the waterproofing method matters more than the tile brand because it’s what keeps the job dry underneath.
Stage 5: Punch list and walkthrough. Days 30 – 45. Final inspection, then the walkthrough. You approve the work before the job is closed out. Every project is covered by our 730-Day Done Right Promise, which means if something isn’t right, we come back and fix it.
If this is the only bathroom in the house, plan around the gap. Most Albany families set up a temporary shower or schedule the heaviest weeks around a trip. We’ll map the exact no-bathroom window in writing before demo starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Full Bathroom Remodel
Most of the budget swings start at the selection meeting, not on the jobsite. Here’s what you’ll be choosing between, and the honest trade-off of each:
- Shower configuration: a walk-in shower with tile and a curb versus a tub-shower combo. Walk-in showers cost more up front and use floor space better, but if you resell, some buyers still want a tub. Keep a tub in at least one bathroom in an Albany bungalow.
- Vanity grade: stock cabinets from a box store (functional, thinner boxes, fewer sizes) versus semi-custom from a line like KraftMaid or Wellborn. Semi-custom fits a 1920s bathroom’s uneven walls better and holds up to a decade of daily use, at a higher price.
- Countertops: quartz from a brand like Cambria or Silestone, versus a laminate or porcelain tile top. Quartz holds up to moisture and doesn’t require sealing. Laminate saves money but shows its age in a wet room.
- Tile and waterproofing: porcelain versus natural stone with a foam shower system versus cement board. Porcelain is durable, low-maintenance and cheaper. Natural stone looks great but needs sealing every year or so.
- Fixtures and ventilation: a standard toilet and vanity versus a comfort-height, high-efficiency model and a properly sized exhaust fan. Don’t skip the fan; an undersized one is the top cause of moisture damage in a foggy climate.
What Full Bathroom Remodeling Costs in Albany, CA
Plan on $9,000 – $28,000 for a full gut remodel, with most Albany jobs landing around $14,000 – $19,000. That’s the number you’ll see in a written estimate, and it should be broken down line by line. The “small bathroom remodel” price band ($5,000 – $12,000) applies to a cosmetic refresh, not a full gut.
Five things push a job from the low to the high end:
- Size: a 5×8 hall bath stays cheap; a 10×12 primary bath with a double vanity costs more in tile, fixtures, and labor.
- Existing condition: rot, a failed subfloor, or a plumbing stack that has to be replaced adds thousands.
- Plumbing and electrical relocation: moving a toilet, tub drain, or adding a dedicated circuit is the most expensive single line item.
- Material grade: semi-custom cabinetry and quartz countertops push the job to the top of the range; stock and laminate keep it low.
- Permit scope: a structural change, a new window, or moving walls means plans, review, and a longer schedule.
The written estimate should state what’s included (demo, rough-in, tile, fixtures, paint, clean-up, and haul-away) and what’s not (structural repair found after demo, some specialty fixtures, and moving plumbing). We don’t leave that to the fine print. Get an exact quote with a free on-site estimate and a line-item written estimate for your Albany bathroom. Call (833) 997-7759.
See the difference
Before
After
Before
After
Before
AfterWhat Albany Homes Specifically Do to a Full Bathroom Remodeling Project
Albany’s housing stock is where the real decisions get made. Most of the homes here are 1920s – 1950s wood-frame bungalows, stucco cottages, and small ranch houses. Under the tile, that means shallow pier-and-beam foundations, knob-and-tube or early cloth wiring, and cast-iron or galvanized plumbing past its service life. So a “simple” bathroom remodel regularly turns into structural repair, foundation bolting, or a panel upgrade, and the estimate needs to account for that.
Because Albany is a small, fully built-out city where almost every project is a remodel on a tight lot, permitting runs through a compact city hall rather than a big county department. That matters here: if your project touches structure, a window, or an exterior wall, you may hit setback or daylight-plane review before framing, and that review takes time. We pull the permits and get the inspections signed off before we close anything up. If the project extends beyond the bathroom, homeowners often pair it with Bathroom Remodeling in Albany to connect the work as one scope.
On the exterior side, fog-cooled summers and wet winters compress the dry-season window, which is why we plan interior work like the bathroom around the same schedule. If exterior work is part of the same project, homeowners often pair this with Roof Repair in Albany or Roof Replacement & Installation in Albany while the dry weather holds. We cover the full Albany service area. For the wider scope of our bathroom work, see Bathroom Remodeling. Our technicians have up to 12 years of experience.
Serving Albany, CA – Our Local Coverage Area
We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Full Bathroom Remodeling in Albany
A full bathroom remodel typically takes 5 to 7 weeks of on-site work in Albany, with 4 to 6 weeks common for a straightforward gut. A structural change, panel replacement, or a special-order fixture can add one to three weeks. Fitting a 1920s bathroom’s out-of-square walls adds time. Call (833) 997-7759 and we’ll give you a realistic schedule with your estimate.
Yes, most full bathroom remodels in Albany require a permit, and any project moving plumbing, electrical, or walls definitely needs one. A cosmetic refresh without touching plumbing may not. We handle the permitting and inspections so you don’t have to deal with the city counter. Call (833) 997-7759 and we’ll tell you what applies to your project.
Yes, and it’s also the best way to keep the price at the low end of the $9,000 – $28,000 range. If the toilet, sink, and shower stay in their current spots, the rough-in work is minor. Moving a drain or supply line is what pushes a job up. Call (833) 997-7759 and we’ll walk your layout and price both options.
The typical range is $9,000 – $28,000, with most Albany jobs coming in between $14,000 and $19,000. Size, existing condition, plumbing and electrical changes, material grade, and permit scope move the number. We give you a line-item written estimate before work starts, with no change orders for anything we should have caught. Call (833) 997-7759 for a free on-site estimate.
Every full bathroom remodling in Albany is backed by our 730-Day Done Right Promise. If something isn’t right in the first two years, we come back and make it right; you don’t chase us for it. We use products from brands like KraftMaid and Cambria under that same guarantee. Call (833) 997-7759 and we’ll put the details in writing.
Get a Free Estimate for Full Bathroom Remodeling in Albany
If you’re planning a full bathroom remodeling project in Albany, start with a free on-site estimate. We’ll walk the bathroom, check the walls, floor, wiring, and plumbing, and confirm what the job really needs. You’ll get a line-item written bid, upfront pricing with no surprises, and a schedule in writing. Call (833) 997-7759 to schedule your free estimate. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.