Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in South San Francisco: What the Job Actually Involves
A tub-to-shower conversion in South San Francisco usually runs $4,130 to $11,800 and takes three to five working days once demolition starts. The job means removing the tub and its surround, prepping the alcove, rebuilding the waterproofing, setting a new shower pan and walls, and reconnecting the drain and valve. Call (833) 997-7759 for a free on-site estimate before you commit to a layout or a finish.
How We Run a Tub-to-Shower Conversion, Stage by Stage
Every conversion follows the same rough order, and the order is what keeps surprises out of the price. Here’s what each stage looks like and what you decide along the way.
Stage 1: Measure, moisture check, and scope lock (visit one). We measure the alcove, confirm the tub is standard 60 inches versus a short unit, and check the subfloor and the wall behind the surround for soft spots, old leaks, or rusted framing. In older South San Francisco homes this is also when we look at the drain and valve; a 1950s cast-iron drain that’s still sound can stay, a corroded one can’t. You leave this stage with a written scope and a fixed number.
Stage 2: Demolition and haul-off (half a day to a day). The tub, surround, valve trim, and old drywall or cement board come out. We protect the floor to the front door and haul debris away the same day. This is the messy stage, and it’s the one that reveals what the wall hides.
Stage 3: Rough-in and framing (one to two days). If the valve location is changing, or the drain is moving to fit a larger pan, the plumbing gets reworked and a permit inspection happens here. If you’re keeping the tub’s footprint, this stage is short. Blocking goes in for grab bars and a seat, and the drain gets set.
Stage 4: Waterproofing and tile (one to two days). A sloped mud pan or a preformed pan, then a bonded waterproofing membrane up the walls to at least the showerhead height. Tile goes on after the membrane passes. This is the stage that decides whether the shower is still sound in fifteen years.
Stage 5: Glass, trim, and final walk (half a day). Glass panels or a door go in, the valve trim and showerhead install, we caulk, we test the drain, and we walk it with you. Most jobs finish inside a working week; moving the drain or finding rot under the tub pushes it to seven to nine days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Tub-to-Shower Conversion
Most of the decisions you make on this job come down to four choices, and each one trades cost against maintenance.
- Prefab pan versus tiled mud pan. A preformed acrylic or fiberglass pan is the fastest and cheapest route and holds up fine in a rental or a spare bath. A tiled mud pan with a linear drain costs more but lets you match the floor tile and looks custom. We mix brands when it matters: a quality pan and valve body set the foundation, then tile and glass go on top.
- Acrylic wall surrounds versus tile. A surround installs in a day and wipes clean, but it’s harder to repair if it cracks. Tile gives you unlimited finish options and lasts decades if the waterproofing behind it is done right; the cost is mostly labor.
- A framed door, a frameless panel, or a simple curtain rod. Frameless glass reads best against a small alcove and shows off the tile, at the higher end of the range. Framed doors cost less. A fixed panel with an open entry is the most forgiving on a tight South San Francisco bath where the door swing fights the vanity.
- Seat, niche, and grab-bar blocking. A built-in bench, a recessed niche, and blocking for grab bars cost a little now and save a lot later. On an aging-in-place conversion, put the blocking in even if the bar goes on in five years.
Whatever you choose, the finished conversion still sits inside a wider set of decisions; if this bathroom is part of a full Bathroom Remodeling in South San Francisco, we scope the whole thing together so the trades don’t collide.
What Tub-to-Shower Conversion Costs in South San Francisco, CA
The number for a tub-to-shower conversion in South San Francisco lands most often between $4,130 and $11,800. That covers demo, a new pan, waterproofing, walls, a valve and showerhead, and glass. A straight swap in the existing alcove sits at the low end; a custom tiled shower with frameless glass and a moved drain sits at the high end.
| Line item | Typical range |
|---|---|
| Standard acrylic pan and surround, same footprint | $4,130 – $6,500 |
| Tiled shower with mud pan, same footprint | $6,500 – $9,500 |
| Frameless glass enclosure and door | $1,200 – $3,000 |
| Valve and drain relocation (if needed) | $600 – $1,800 |
| Permit and inspection | $250 – $700 |
Four things push a job from the low end to the high end: the size of the alcove and whether a short tub becomes a standard shower footprint; the condition we find under the tub (rot, rusted framing, an unsound drain); moving plumbing or electrical; and the material grade of the tile and glass. A written estimate lists each of those separately so you can see the number, not guess at it. Our bathroom remodeling service sets every job on Bathroom Remodeling upfront pricing; the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat South San Francisco Homes Specifically Do to This Job
South San Francisco is the Industrial City, and the housing stock shows it. The single-family homes on the flatlands west of 101 and along the older blocks off El Camino Real date to the 1940s through the 1960s, so pulling a tub out often reveals cast-iron drains and valve bodies past their service life. In these homes we plan for a rough-in contingency, because a tub surround that looks fine on the surface can hide framing that took on water for years. The higher-density townhomes near the Caltrain corridor bring the opposite issue: tight clearances, a shower alcove that shares a wall with the neighbor, and HOA rules on plumbing changes that we read before we demo. The city’s damp fog-belt climate is why we don’t shortcut the waterproofing; a shower that gets a membrane done right dries out between uses, and one that doesn’t grows mold behind the tile. We cover the whole city, ZIP codes 94083 and 94080 included, as part of our South San Francisco work.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in South San Francisco
Most South San Francisco conversions finish in three to five working days once demolition begins. Moving the drain, relocating the valve, or discovering rot under the tub adds two to four days. You’ll have a firm timeline in the written estimate, not a guess.
Yes, when the plumbing changes: moving the drain, replacing the valve body, or altering the rough-in triggers a permit and an inspection in South San Francisco. A same-footprint swap with no plumbing changes may not, depending on the scope. We pull the permit, meet the inspector, and hand you the signed card. Call (833) 997-7759 and we’ll tell you what your specific job needs.
In most cases, yes. If the tub is a standard 60 inches and the drain and valve sit where a shower needs them, we keep them and the job stays at the low end of the range. When the layout pushes the drain or the wall has to move for a bench, the price climbs. Call (833) 997-7759 for an exact quote – estimates are free.
Between $4,130 and $11,800, depending on the pan type, the wall finish, the glass, and whether the drain moves. A straight acrylic swap sits near the bottom; a tiled shower with frameless glass sits near the top. Our technicians have up to 12 years of experience on these installs, and every job is backed by the 730-Day Done Right Promise. Call (833) 997-7759 for a written line-item estimate.
Every conversion is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship on the pan, waterproofing, tile, and glass installation. Manufacturer coverage on the valve and pan comes from the brand. Technicians are background-checked and arrive in uniform, and some South San Francisco homeowners pair a bathroom upgrade with a roof project while we’re on site, such as Metal Roofing in South San Francisco or Tile Roofing in South San Francisco.
Get a Free Tub-to-Shower Conversion Estimate in South San Francisco
Call (833) 997-7759 for a free on-site estimate on your tub-to-shower conversion in South San Francisco. A live person answers, day or night, and we’ll set a visit that fits your schedule. On the visit we measure the alcove, check the drain and walls, and leave you with a written scope and a fixed price. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.