Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Daly City: What the Job Involves and What It Costs
Gutters & Accessories work in Daly City means replacing or rebuilding a home’s rain-handling system – hangers, fasteners, downspouts, screens and diverters included – and most single-family jobs run $1,400 to $4,200, finished in one to two days. Full replacement with fascia and soffit repair climbs to $6,500 on homes where the fog has been soaking west-facing trim for years. Call (833) 997-7759 and we’ll set a free on-site estimate; you’ll get a written, line-item quote before anything gets ordered.
How we run a gutter job, start to finish
A gutter replacement looks small from the street. Under a Daly City roofline it’s a fastener-and-moisture problem more than a metal problem, and the sequence we follow keeps it that way.
1. Inspection and layout (about 90 minutes, day 1)
We walk the roofline with a level and a hose, checking pitch, hanger spacing and where water actually goes after it leaves the roof. On hillside lots above the Mission Street corridor we also check the discharge point – a downspout that dumps onto a slope sends water toward the foundation instead of away. This is where you decide whether the job is a sectional replacement or a full re-hang, and whether existing fasteners are worth keeping.
2. Tear-off and substrate check (2 to 4 hours)
Off come the old gutters and hangers. Then we look at what the fascia really is – often original 1950s redwood or fir under stucco, sometimes soft enough that a screw won’t hold. On the damp west-facing walls around Westlake and Serramonte assume the fascia check finds rot in at least one run. You get a photo of what we find and a price for the repair before we proceed, not a surprise on the invoice.
3. Fascia repair and flashing (half a day when needed)
Sections with rot get cut out and replaced with treated lumber so the next 20 years don’t repeat the last 20. We reflash behind the gutter line where the roof edge meets the fascia, because that joint is where the fog finds its way in.
4. Install (half a day to a full day)
Hangers get set on 24-inch centers, or tighter where snow-load isn’t a factor but wind-driven rain is. Seams are sealed or run continuous, and downspouts are routed to a splash block, drain line or daylight discharge. On windy lots we add leaf screens and lock the front edge – a Daly City gutter full of sand and eucalyptus litter is a gutter that isn’t draining.
5. Test, adjust, walkthrough (30 to 45 minutes)
We run water through every section, check the pitch with the level, and confirm nothing pools or overflows. You walk the line with us. Any adjustment gets made before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’re actually choosing between
Most of the decisions on a gutter job come down to four choices. Here’s what each costs you and how it holds up.
- Aluminum (0.032 gauge): the standard choice, and the one we quote most. Seamless runs, baked-on finish, cheap to repair. Holds up well inland, but near the coast the acid in fog causes the finish to chalk over time – so we specify a heavier gauge and a coated screw rather than use the thin builder-grade 0.025.
- Aluminum (0.040 gauge): about 20% more than the standard weight. Better for Daly City because it resists denting from the sand and wind loads on west-facing eaves, and holds hangers with less flex.
- Steel with factory finish: about double the cost of aluminum. Holds its shape and takes a bigger water load, but any scratch down to bare metal rusts fast in salt air – so we only recommend it with a proper factory finish and a coated fastener system. Worth it on larger roof runs.
- Copper: the lifetime choice, three to four times the aluminum price, and it develops the patina homeowners either want or don’t. Real copper is the honest answer for a forever home on the coast. It also needs copper or stainless hangers and fasteners or the two metals react.
- Hangers and fasteners: the choice most people skip. Galvanized steel screws in aluminum gutters near marine air are a slow failure – the hardware goes first and the gutter with it. We spec stainless or coated fasteners wherever the salt exposure is real.
- Accessories: leaf screens, gutter guards, downspout diverters to rain barrels, and underground drain lines to daylight. Each adds $8 to $30 per linear foot. On a home with trees, a quality guard usually pays for itself in one skipped cleaning; on an open hillside, skip the guard and spend the money on better hangers.
What Gutters & Accessories costs in Daly City, CA
For a typical single-story or two-story Daly City tract home with 120 to 180 linear feet of roofline, plan on $1,400 to $4,200 for a full aluminum replacement. Crews sometimes quote per linear foot – $8 to $16 a foot installed is the realistic band here, higher for steel and much higher for copper. Small patched repairs usually land $350 to $900.
| Line item | Typical Daly City range |
|---|---|
| Aluminum gutter replacement (120-180 lf) | $1,400 – $4,200 |
| Steel gutter replacement | $2,600 – $6,000 |
| Copper gutter replacement | $5,500 – $12,000 |
| Fascia repair / replacement | $350 – $1,800 |
| Downspout add or relocate | $150 – $500 each |
| Leaf screens / gutter guards | $8 – $30 per linear foot |
| Seam or section repair | $150 – $600 |
The variables that push a job toward the high end in Daly City: roofline length and number of stories, how much fascia rot the tear-off reveals, whether downspouts need to be relocated to get water away from a slope, the gauge or material grade you pick, and whether soffit work overlaps the job. That last one is where a gutter job naturally becomes part of a Roofing in Daly City scope – roofline, fascia and soffit replaced together.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
The stock here is mostly 1940s-1960s stucco-over-wood-frame tract homes, packed along the Mission Street and El Camino corridors and set into graded hillside cuts. On the steep streets above Mission Street we regularly find original 1950s fascia that’s been quietly rotting from the outside in for decades behind a west-facing wall – the fog soaks that wall and the sun never fully dries it. That’s why we always check the fascia before we quote a final number. Soffit and hanger runs on those walls often need galvanized or stainless fasteners just to hold.
On the hillside lots, drainage matters as much as the gutter itself. Sand and active slide mapping on San Bruno Mountain’s western flank means we route downspouts and diverters to a safe discharge instead of just letting them dump. That part of the job is where we often pair the gutters with Sliding & Patio Doors in Daly City when the water needs to get clear of a rear patio.
Permits are usually not required for a like-for-like gutter replacement on a single-family home, but any structural change or a job that touches an apartment building’s shared roofline may. We check that before we quote, and we pull what’s needed. If you’re working with an HOA, budget extra time for their approval on finish color and guard style.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Gutters & Accessories in Daly City
Most Daly City homes are done in one to two days once fascia is sound. A job that uncovers rot in multiple sections can stretch to three or four working days because the repair has to dry and settle before the new run goes on. Call (833) 997-7759 and we’ll give you a realistic window after the inspection, not a guess.
Usually not for a like-for-like replacement on a single-family home. Structural fascia work, work on a shared roofline, or anything tied to a larger re-roof can trigger one. We check with the city before quoting and include it in the written estimate if it applies.
Yes, when the fascia is sound and the roof edge is intact – most sectional jobs leave the roof untouched. Where the fascia has rotted, skipping the repair just means the new gutter fails inside a year, so we won’t do it.
Guards run $8 to $30 per linear foot depending on type and material. On a typical Daly City home that’s $1,200 to $4,500 on top of the gutter install. On a tree-lined lot they’re usually worth it; on an open windy lot, better hangers will serve you longer.
All work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Material warranties last as long as the manufacturer’s paperwork, and we hand over the documents at the walkthrough.
Get a free estimate for Gutters & Accessories in Daly City
We’ll come out, measure the roofline, check the fascia and test how the water actually drains – then give you a written, line-item quote with no surprises. That’s true whether the job is one gutter run or a larger scope paired with Impact Garage Doors in Daly City or our Roofing service. A live person answers (833) 997-7759 around the clock. We cover Daly City and the surrounding Peninsula.
Written by the team at Groundwork Construction Co.