Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Energy-Efficient Windows in Daly City, CA: What They Cost and How Long They Take
Energy-Efficient Windows in Daly City typically run $4,500 – $15,000 for whole-house vinyl replacement, and $8,000 – $25,000 when you step up to impact-rated units built for wind and fog exposure. Most of our Daly City installs are finished in one to three days on site, with a two-to-four-week lead time on materials. Call (833) 997-7759 for a free on-site estimate.
How we run an energy-efficient window job, start to finish
Every job follows the same five stages. Here’s what actually happens and when you’ll be asked to make a decision.
Day 1: Walkthrough and measurement (about 90 minutes)
We measure every opening, photograph the interior and exterior trim, and check the framing behind the drywall or stucco. This is where the fog damage shows up: on Daly City’s west side, we routinely find soft framing and cracked stucco that a tape measure alone won’t reveal. You’ll decide on the spot whether to patch and paint around each opening or add new interior trim.
Week 1 – 3: Ordering and permitting
Once you’ve picked your window series and glass package, we place the order and pull the permit if your scope requires one. Custom sizes and impact-rated units add two to three weeks over standard stock. You’ll sign off on a line-item quote before anything is ordered, and the number on that quote is the number you pay.
Install day: demolition and prep (2 – 4 hours per window)
We pull the old sash and frame, check for rot, and replace any soft wood before the new unit goes in. On a 1950s Daly City house set on a graded hillside cut, that rot check matters – fog-soaked west-facing walls fail from the outside in, and skipping it just buries the problem. You don’t need to be home for this stage.
Install and seal (1 – 2 days for most homes)
New units get set, shimmed, shimmed square, insulated at the rough opening, and sealed with exterior-grade caulk and flashing. Most Daly City jobs are done in a single visit. You’ll decide before install day whether you want the low-E coating on the south- and west-facing glass only, which is cheaper and works better in our fog belt than coating every pane.
Final walkthrough and warranty sign-off (45 minutes)
We test every lock, check operation, clean the glass, and hand over the written workmanship terms. All of it sits under our 730-Day Done Right Promise. If a seal or a sash fails, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for energy-efficient windows
- Vinyl frames: the workhorse for this job. They don’t rot, they hold up to the fog, and they keep you in the $4,500 – $15,000 window replacement range. The trade-off is a shorter life than fiberglass on sun-baked south-facing walls.
- Fiberglass frames: stronger, better thermal movement, and they tolerate Daly City’s moisture swings without warping. Expect 20 – 30% more than vinyl, and it’s worth it on the exposed west-facing openings.
- Glass packages: double-pane with low-E and argon is the honest standard here. Triple-pane rarely pays back in our mild climate – the fog means we’re fighting moisture, not extreme heat or cold.
- Impact-rated units: rated for wind-borne debris and high wind loads. These belong on exposed upper stories and add roughly $8,000 – $25,000 across a whole house in the impact window installation tier.
- Brands we work with: Andersen and ECO Window Systems lead our energy-efficient lineup, and Mr-Glass handles the impact-rated side.
What Energy-Efficient Windows cost in Daly City, CA
You’re looking at $4,500 – $15,000 for a standard whole-house replacement and $8,000 – $25,000 for impact-rated glass. A single window runs $400 – $900 installed depending on size. Five variables push a job toward the top of that range:
- Window count and size: a 12-window house and a 20-window house are different budgets. Picture windows and custom sizes cost more.
- Existing condition: hidden rot, cracked stucco, or failed framing adds demo and repair time.
- Glass and frame grade: vinyl standard vs. fiberglass and impact-rated.
- Permit scope: like-for-like swaps often skip a permit; changed openings or impact-rated upgrades usually trigger one.
- Access: second-story and hillside openings need staging and occasionally scaffolding.
Your written estimate covers materials, labor, disposal, sealing, and permit fees where required. It does not cover interior painting or drywall repair beyond the opening – those get quoted separately if you want them. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
Daly City is built on the wind-blown sand dunes and fog-belt slopes of San Bruno Mountain’s western flank, and that changes the job. On the steep streets above the Mission Street corridor, we regularly open a wall and find the original 1950s stucco rotting from the outside in – the fog and onshore wind keep the west-facing walls damp year-round with little sun to dry them. That means our prep stage often runs longer here than in flatter Peninsula cities, because the rot is already there when we arrive. The stock we work on most is post-WWII stucco-over-wood-frame homes packed under ZIPs 94015 and 94014, many on shallow poured slabs. Windows in these homes typically need flashing and sealing detail that a newer tract house in the corridor would not, and drainage around the sill matters more than the glass spec. We cover the whole of Daly City, and the surrounding hillside streets get our full attention.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Energy-Efficient Windows in Daly City
Most whole-house installs finish in one to three days on site, plus a two-to-four-week material lead time before we start. Custom sizes and impact-rated units add up to a week. The timeline gets confirmed in writing before you commit.
Straight like-for-like replacements often don’t require a permit, but changed openings and impact-rated upgrades usually do, and we pull it for you. Your quote tells you exactly what’s included, and the inspection gets passed before we call the job done.
Yes – most swaps use existing frames and finish with new trim or touch-up paint, no plumbing or structure touched. A retrofit without full frame removal is the common path, though if we find rot in the framing we’ll flag it and quote the repair.
Yes, for two reasons: the upgraded seals and flashing keep moisture out of the wall, and the low-E glass reduces condensation on the interior sill. That’s the real payoff here more than energy savings – the fog does more damage to Daly City homes than heat or cold does.
Every install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship on top of the manufacturer’s warranty on the units themselves. You’ll get it in writing at the final walkthrough.
Get a free estimate on energy-efficient windows in Daly City
Call (833) 997-7759 and we’ll schedule a free on-site estimate. We measure every opening, check the framing and stucco for rot, and hand you a line-item quote for energy-efficient windows in Daly City with no surprises. Calls are answered by a live person, 24/7. This is part of the broader Windows & Doors in Daly City scope we handle here, and our Windows & Doors service covers the full lineup. Homeowners often pair this work with Iron Fence in Daly City or Fence Repair in Daly City while we’re on site.
Written by the team at Groundwork Construction Co.