Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Burlingame: What the Job Really Involves
Most patios, walkways and pool decks in Burlingame run $3,500 to $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot alongside it. A typical patio takes 3 to 6 working days from demo to joint sand; a full patio-plus-walkway-plus-pool-deck package usually lands in the 2 to 3 week range once concrete flatwork cures. Call (833) 997-7759 for a free on-site estimate with a line-item quote.
A patio, walkway and pool deck package means tearing out old concrete or failing pavers, grading so water runs away from the house, compacting a proper base, setting the surface material, and finishing the edges where the hardscape meets lawn, planting beds or a pool coping. On Burlingame’s early-1900s lots, the base work and drainage matter more than the paver pattern you pick.
How We Build Patios, Walkways & Pool Decks in Burlingame, Step by Step
The sequence matters as much as the material. Here’s what actually happens, and when you’ll need to make a call.
Stage 1: Site visit and layout (day 0)
We walk the yard, measure setbacks from the property line, and check where downspouts, irrigation lines and pool equipment sit. If the patio runs close to the house, we confirm the finished height stays below the siding and weep screed. You’ll decide the patio’s footprint, which way it should drain, and the material family during this visit.
Stage 2: Tear-out and disposal (days 1 – 2)
Old concrete, cracked pavers and failing pool deck coatings come out and go to a licensed disposal site. On older Burlingame properties, this is also where we find the surprises: an abandoned drain line, a shallow utility run, or a tree root field under the old slab. You’ll decide whether a stubborn root gets ground out or the patio edge shifts slightly to accommodate it.
Stage 3: Base prep and grading (days 2 – 4)
This is the stage that decides whether the patio stays flat in ten years. We excavate to depth, compact in lifts, and set the slope at roughly 1 – 2% away from the house and pool. Paver jobs get a geotextile separation fabric; concrete gets a compacted aggregate base. If drainage is tight, we add a channel drain or dry well here. You’ll confirm the drain route and where the discharge point lands.
Stage 4: Surface installation (days 4 – 7 for pavers, 7 – 10 including cure for concrete)
Pavers go down on a screeded bedding layer, cut tight at edges and pool coping, then get polymeric joint sand. Concrete gets formed, poured and finished with a broom, salt or stamped texture. For pool decks, we set the finish and confirm slip resistance around the waterline. You’ll pick the paver color, texture and border pattern before this stage starts; changes after delivery add days.
Stage 5: Finishing, cleanup and inspection (final day plus cure)
Edges get restrained, joints get sanded, the site gets washed down and swept. Concrete continues curing for about 7 days before you park furniture on it. We walk the finished work with you and hand over care instructions. If any inspection applies to the scope, we coordinate it before final walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Patio, Walkway and Pool Deck Options, With the Honest Trade-offs
You’ll choose from a handful of real material families. Here’s how they actually behave in a Burlingame yard.
- Concrete pavers (Belgard and similar): $3,500 – $11,000 installed for a typical patio. They flex with minor ground movement, individual units can be lifted and replaced, and they come in colors that read well against a Spanish Colonial or Tudor facade. Highest upfront cost of the common options, and joint sand needs topping up every few years.
- Poured concrete, broom or exposed aggregate: the budget path, often $8 – $18 per square foot for simple flatwork. Cheap to pour, but it cracks. In Burlingame’s damp winters, hairline cracks open and widen, and repairs are visible patches rather than invisible swaps.
- Stamped or colored concrete: mimics stone or slate at a middle price. Holds up well for walkways and pool surrounds, but the surface seal needs re-coating every 2 – 4 years, and the finish can look dated if the pattern is too busy.
- Natural stone (bluestone, slate, travertine): the premium choice for entry walks and pool coping. Beautiful against older homes, but higher material and labor cost, requires a skilled setter, and some stones get slippery around a pool when wet unless honed or textured.
- Pool deck finish and coping: choose between poured concrete, pavers, and textured overlays. Coping needs a slight overhang and a clean joint against the pool wall to shed water. Slip resistance matters more here than anywhere else on the job.
One more decision: borders and banding. A contrasting paver border reads crisp against a lawn but adds cost per linear foot. Skip it on large lawns; keep it on tighter pool surrounds where the edge is the visual focal point.
What Patios, Walkways & Pool Decks Cost in Burlingame, CA
Plan on $3,500 – $11,000 for a paver patio here. Walkways and pool deck surrounds are priced per square foot alongside the patio, so a full package of patio plus walkway plus pool deck typically lands higher. Here’s what moves a job toward the low or high end:
- Size and shape. Square footage is the biggest lever. A simple rectangular patio costs less per square foot than one with curves, angles or multiple levels.
- Existing condition. Tear-out of thick old concrete, root removal, or regrading a yard that slopes toward the house adds labor and disposal days.
- Access. Narrow side yards, tight gates and stair carries slow the crew and add cost. Burlingame’s narrow lot setbacks come into play here.
- Material grade. Concrete pavers sit at the top, poured concrete at the bottom, natural stone above pavers. Borders, banding and custom cuts each add.
- Drainage scope. A channel drain, dry well or regrade pushes the number up but is what keeps water out of your crawlspace. Skipping it because it costs more is usually the wrong call.
Your written estimate lists material, square footage, base depth, drainage, disposal and cleanup line by line, so you can see what you’re paying for. What’s typically not included: landscape planting, irrigation repairs beyond routing, and any structural work on the pool shell itself. Those get quoted separately when they come up.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to This Job
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and that shapes hardscape work in ways it doesn’t in newer cities. In Easton Addition and Burlingame Park, the homes are early-1900s through 1940s Craftsman bungalows, Spanish Colonial Revival and Tudor cottages, many on pier-and-beam or raised foundations with narrow lot setbacks. That means the patio or walkway you set against the house has to shed water away from a raised foundation rather than a slab, and the finished grade has to stay well below that framing. We see the same failure mode repeatedly around 94010 and 94011: a hardscape that was graded flat or slightly toward the house, then years of damp winters pushing moisture under the floor. Re-grading during a patio rebuild is often the fix that saves the crawlspace.
Burlingame sits between the bay and the coastal hills, so cool fog-influenced summers and damp winters with persistent morning moisture keep the ground wet longer than inland. Pool decks and walkways near mature trees also collect more organic staining and moss, which argues for textured finishes and regular cleaning rather than a slick smooth surface. If your patio project is really part of a larger exterior plan, it works well alongside our Driveway & Pavers in Burlingame work, and owners adding a backyard cottage often pair it with ADU Site Prep & Utilities in Burlingame.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Patios, Walkways & Pool Decks in Burlingame
A standard patio takes about 3 to 6 working days from tear-out to joint sand; a pool deck plus walkway plus patio package usually runs 2 to 3 weeks. Concrete needs about 7 days of cure before foot traffic and furniture, so keep that in your timeline. Weather and access can stretch the schedule; we build those contingencies into the estimate so the plan holds.
Patios, walkways and pool decks at grade usually don’t require a building permit, but scope and site conditions can change that. Work touching a raised foundation, retaining-adjacent grading, or a new pool deck near the waterline should be checked with the city before we build. We confirm permit requirements with Burlingame’s building department during the estimate so nothing surprises you mid-project.
Sometimes yes, most of the time no. If the old slab is sound, level and well-drained, a paver overlay on a proper bedding layer can work. If it’s cracked, heaved or draining toward the house, tear-out is the sounder choice. We look at the slab, not just the surface, before recommending either approach.
Budget the patio at $3,500 – $11,000 and price the pool deck surround per square foot on top of that. Cost depends on coping material, whether you repour, overlay or set pavers, and how much of the existing deck has to come out. Textured and slip-resistant finishes cost a bit more than smooth concrete and they’re the right call around water. Call (833) 997-7759 for a line-item quote.
Every hardscape project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for two full years, backed in writing. Our technicians are background-checked and arrive in uniform, and we answer the phone with a live person 24/7, so warranty questions don’t wait until Monday.
Thinking about a bigger exterior overhaul? Owners often pair a new patio with our Driveway & Pavers service across the front yard, and for homes aging out of their old surfaces, Full Kitchen Remodeling in Burlingame work frequently runs on a similar schedule when the interior and exterior projects start together. We also handle projects across Burlingame and nearby Peninsula cities including Foster City, South San Francisco, Daly City and San Francisco.
Get a Free On-Site Estimate for Patios, Walkways & Pool Decks in Burlingame
Call (833) 997-7759 to schedule a free on-site estimate for your patio, walkway or pool deck in Burlingame. On the call, we book a visit, look at your yard, check grade and drainage, and walk you through material options. You’ll get a written line-item quote with upfront pricing, so the number you see is the number you pay, plus 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co..