Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Richmond, CA: What to Expect
Walk-In Showers & Shower Remodeling in Richmond, CA runs $9,000 – $28,000 for a full project, with a dedicated walk-in shower install typically landing between $4,500 and $12,000. Most jobs take two to four weeks from demo to final inspection, depending on whether we’re moving plumbing or just rebuilding the wet zone. Call (833) 997-7759 and we’ll walk your Richmond bathroom and give you a written line-item number.
The Process, Stage by Stage
1. On-site measure and scope (day 0, about 90 minutes)
We look at the existing shower or tub surround, the drain location, the valve brand and condition, and whether the subfloor under the pan is sound. You decide right there on the footprint: same location, or relocated. That single choice drives the whole budget, so it’s the first thing we lock.
2. Demo and framing inspection (days 1 – 2)
Out comes the old tile, backer board, pan and valve trim. This is where older Richmond homes surprise people. We open the wall and find out whether the framing behind the wet wall is solid or has been quietly absorbing moisture for twenty years. You get a call the same day with photos and a straight answer if anything needs replacing.
3. Rough-in plumbing, electrical and inspection (days 3 – 5)
New drain, valve, blocking for grab bars, and any lighting or fan work happen here. Then the rough inspection. Nothing gets closed up until the inspector signs off. If you’re changing valve brands or adding a thermostatic mixer, this is the deadline to decide.
4. Waterproofing and tile (days 6 – 12)
This is the stage that decides whether a shower lasts. We build a sloped pan, apply a bonded waterproofing membrane with proper overlaps and banding at every corner and curb, and flood-test before a single tile goes down. Then you see the tile layout on the wall and approve the pattern and grout color before we commit.
5. Glass, fixtures, final walkthrough (days 13 – 16)
We template the enclosure after tile, so the glass fits the actual opening, not the drawing. Fixtures, seat, niche trim, and a full water test. You walk through with us, and everything is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
A shower is a small space with big decisions. Here’s what actually moves the outcome:
- Tile versus solid-surface walls. Porcelain or ceramic tile runs roughly $8 – $25 per square foot installed and gives you real design range. Acrylic or solid-surface panels cost less up front and clean up easily, but they show scratches over time. Tile wins on longevity when the waterproofing behind it is right.
- Frameless versus semi-frameless glass. Frameless glass in 3/8-inch tempered runs higher but opens the room visually and is the standard choice in a walk-in. Semi-frameless costs less and still looks clean. We template enclosure glass on-site so the panels sit flush – brands like Mr-Glass are a common pick here.
- Curbless versus low-curb pan. A curbless shower with a linear drain is the accessible option and the most waterproofing-intensive build. It needs the floor structure worked out first, so decide this before demo.
- Valve and trim grade. A standard pressure-balance valve versus a thermostatic system changes both cost and comfort. Budget trim wears out faster than solid brass; we spec accordingly.
- Barrier-free extras. Grab bar blocking, a fold-down seat, a niche instead of a caddy. Installing blocking during framing costs very little. Retrofitting it later means opening the wall again.
What Walk-In Showers & Shower Remodeling Costs in Richmond, CA
Plan on $9,000 – $28,000 for a full Richmond project, with a standalone walk-in shower install at $4,500 – $12,000. A straight shower replacement runs $3,000 – $8,500. Here’s a sample line-item breakdown of a mid-range job:
| Item | Typical Range |
|---|---|
| Demo, disposal and framing repair | $700 – $1,800 |
| Pan build, waterproofing and flood test | $1,200 – $2,800 |
| Tile and setting materials | $1,500 – $5,500 |
| Valve, fixtures and trim | $600 – $2,200 |
| Glass enclosure | $900 – $3,500 |
| Permit and inspection fees | $300 – $900 |
What pushes a job to the high end: relocating the drain or valve to a new wall, swapping a tub for a curbless pan (floor structure comes into play), premium large-format or natural stone tile, frameless glass with custom hardware, and any required plumbing upgrade discovered at demo. What keeps it low: keeping the drain and valve where they are, a tub-to-shower conversion that reuses existing plumbing, standard porcelain tile, and a semi-frameless enclosure. Our estimate is written line-item, and the number you see is the number you pay. Most jobs over the project threshold qualify for our $1,000 off projects over $10,000, and 0% financing for 18 months is available. Call (833) 997-7759 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Homes Specifically Do to This Job
Richmond is a former WWII shipyard boomtown, and that history sits in the walls of the homes we open. Much of the housing here dates to the 1910s – 1950s: small stucco and wood-frame bungalows and long rows of wartime duplexes. When you remodel a shower in 94801 or 94804, you’re often opening a wet wall on a home with aging galvanized plumbing, minimal insulation, and a pier-and-post foundation that may need seismic attention before we build a curbless pan. We see shower failures here that aren’t about the tile at all: it’s the old valve, the undersized drain, or a pan that was never properly waterproofed the first time. The marine fog also matters – salt-laden air corrodes fixture finishes and the fasteners we use, so we spec corrosion-rated hardware close to the coast. And the duplex quirk is real: postwar units near the old shipyards sometimes share a single water service line, and adding a bathroom or second kitchen can trigger a mandatory upgrade to separate metering. We flag that before the contract, not after demo.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Richmond
Plan on two to four weeks from demo to final inspection. A straightforward replacement in an existing footprint runs closer to two; a relocated drain, curbless pan, or unexpected plumbing repair pushes it toward four. Call (833) 997-7759 for a scheduling estimate on your specific bathroom.
Yes in most cases. Any work that changes plumbing, adds a drain, alters the valve, or touches electrical requires a permit and inspection. A cosmetic tile-only refresh may not. We pull the permit and handle the inspections, so you’re not chasing the city. If anything needs a correction, we handle it.
Yes, and this is the smartest budget move for most Richmond homeowners. Keeping the drain and valve where they are drops the price toward the low end – often under $8,000 for a standard install – and shortens the timeline. Moving fixtures is what turns a $6,000 shower into a $12,000 one.
A dedicated walk-in shower install runs $4,500 – $12,000, and a full bathroom remodel involving a walk-in shower lands at $9,000 – $28,000. Finish grade, glass type, and plumbing changes drive the spread. Call (833) 997-7759 for a written line-item estimate – no surprises.
Every walk-in shower we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship, not just the materials. We stand behind it in writing.
Ready for a Real Number?
A free on-site estimate for Walk-In Showers & Shower Remodeling in Richmond starts with a visit, a look at your existing plumbing and walls, and a written line-item quote with a firm price. Call (833) 997-7759 – a live person answers 24/7, no voicemail. We serve all of Richmond, including San Pablo, El Cerrito and El Sobrante, and we’re happy to talk through your options on the call or on site.
Written by the team at Groundwork Construction Co.