Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Richmond, CA: What It Takes and What It Costs
Door installation in Richmond runs about $800 to $3,500 for a standard exterior or interior door, with most single-door projects done in a day and anything structural or permit-heavy stretching to two or three. The number that surprises people here isn’t labor. It’s what we find once the old slab comes out of a 1940s stucco wall and the framing has been quietly rotting behind salt-soaked trim for a decade. Call (833) 997-7759 for a free on-site estimate and we’ll tell you straight what your wall is hiding.
The five stages of a door installation, and what you decide at each one
There’s no magic to a good door install. There’s a sequence, and skipping a step is how doors end up sticking every February.
Stage 1: Measure and scope (day 1, about 45 minutes)
We measure the rough opening, check the wall for plumb and square, and look at how the existing door is flashed. In Richmond’s older stucco homes, this is where we find out whether the door was ever properly flashed at the head. You decide the door style and material at this visit, because the rough opening drives what fits. This visit is the free estimate.
Stage 2: Order and permit (3 to 10 business days)
Stock doors land in days. Custom sizes, special finishes, and anything with sidelights run two to four weeks. If your Richmond project changes the opening size or touches a load-bearing wall, the city of Richmond’s building department wants a permit, and that adds roughly a week to the front end. We pull it; you don’t chase paperwork.
Stage 3: Demo and prep (day 1 of work, 2 to 3 hours)
Old door and frame come out. We cut back damaged stucco or siding, inspect the framing, and replace any soft wood. This is the honest moment. Nine times out of ten the framing near the threshold on a Richmond home has some rot from marine moisture. You approve the repair cost before we close it back up.
Stage 4: Install and flash (day 1, 3 to 5 hours)
New door set, shimmed, leveled, and sealed with a proper sill pan and head flashing. That flashing detail matters more here than almost anywhere in the Bay Area, because our fog pushes moisture sideways, not just down. Hardware, lockset, and weatherstripping go on last.
Stage 5: Finish and walkthrough (day 2 or 3, half a day)
Trim, caulk, paint touch-ups, and a swing test. You walk the door with us, open and close it a dozen times, and confirm the latch catches clean. If anything’s off, we’re back before you have to ask. That’s the 730-Day Done Right Promise doing its job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between, and the honest trade-offs
Most Richmond homeowners spend their decision time on two things: material and what’s around the door. Here’s how the choices actually shake out.
- Fiberglass exterior doors – the best fit for most Richmond homes. They don’t rust, they hold paint, and they shrug off our salt air. $900 to $2,000 installed. Slight trade-off: they feel a touch heavier than wood and can’t be trimmed down much, so the opening has to be right.
- Steel exterior doors – strong and the most secure, $700 to $1,600. Here’s the Richmond caveat: steel wants to rust, and a steel door facing the bay will start showing it at the bottom edge within a few years unless the paint film stays intact. Good for sheltered entries, less so for a west-facing door taking the fog.
- Wood doors – beautiful and repairable, $1,200 to $3,000. They need repainting every few years in this climate. We’re honest about that upkeep when we quote them.
- Interior doors – hollow-core at $300 to $600 installed, solid-core at $500 to $900. Solid-core dampens sound, which matters in the wartime duplexes where two units share a wall.
- Hardware and thresholds – this is where the corrosion story lives. Standard zinc-plated hinges will pit and seize in Richmond within a handful of years. Stainless steel hinges, coated screws, and an aluminum or composite threshold cost $80 to $250 more and outlast the door they’re bolted to.
Every door we hang comes with that corrosion-minded hardware as an option, not an upsell we bury in the fine print. Andersen and Marvin are our go-to lines when a homeowner wants a premium entry system.
What Door Installation costs in Richmond, CA
Budget $800 to $3,500 for a single door installation in Richmond. Interior doors run $300 to $900 installed. A premium entry system with sidelights and a proper storm-rated threshold runs $2,500 to $3,500 and up. Here’s what moves you toward the top of that range.
| Line item | Typical range |
|---|---|
| Interior door, hollow or solid-core | $300 – $900 |
| Standard exterior door, same opening | $800 – $2,000 |
| Premium entry door with sidelights | $2,500 – $3,500 |
| Wall framing repair / rot | $150 – $600 |
| Opening resized (permit required) | $600 – $1,500 |
| Stainless / corrosion hardware upgrade | $80 – $250 |
The five variables that actually move the number: the size and shape of the opening (a non-standard wartime door size means a custom slab), the condition of the framing once we open the wall, whether the opening has to change, the material and hardware grade you pick, and whether Richmond requires a permit for the change. Stucco patching around a replaced door in an older home runs higher than siding.
Every written estimate we hand you is line-item, and the number you see is the number you pay. No changeless surprise at the end. If we find rot mid-job, you see the price and approve it first. Call (833) 997-7759 to schedule the free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat a Richmond home does to a door job
Richmond’s housing stock is the story here. Much of the city is small stucco and wood-frame homes built between the 1910s and 1950s, with rows of wartime duplexes and bungalows clustered in ZIPs like 94804 and 94805. Those original doors were sized for a different era, so a replacement often means a custom slab or a resized opening, which pulls in a permit under Richmond’s building department. Do a door job in El Cerrito and you’re working on a different age of house; here you’re rehabbing wartime worker housing. The pier-and-post foundations under many of these homes mean the wall can settle slightly over time, and we check for that plumb before we order.
The salt air is where it gets specific. On homes near the waterfront and in the fog belt, exterior hinges and locksets corrode years faster than they would inland. That’s why we default to stainless hardware and coated fasteners and recommend a quick inspection of your exterior door hardware every couple of years. The cool, wet winters also test flashing: a poorly flashed door head lets moisture in sideways, and you see it as a soft threshold and sticking door by spring. If you’re already planning visible exterior work, homeowners often pair this with a Chain Link Fence in Richmond on the same visit.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Richmond
A single standard door installs in a day, start to finish. Custom orders, resized openings, or permit work stretch the front end to two or three weeks. Call (833) 997-7759 and we’ll give you a realistic timeline for your door.
You need a permit if the project changes the size of the opening or affects structural framing; a same-size replacement usually doesn’t. We check the specific rules with the city of Richmond and pull the permit when it applies, so the inspection passes the first time. Call (833) 997-7759 with your door specs and we’ll tell you.
Yes, in most cases we can. A standard replacement in the same opening leaves plumbing and wiring untouched, which keeps cost and disruption down. A full Windows & Doors in Richmond scope, or relocating a door into a new wall, is when utility work comes into play – that’s a bigger conversation and we’ll quote it honestly.
Interior doors run $300 to $900 installed; exterior doors run $800 to $3,500 depending on the door, hardware, and whether framing or opening work is involved. Call (833) 997-7759 for an exact line-item quote – estimates are free and there’s no obligation.
Workmanship is covered by our 730-Day Done Right Promise, backed in writing. If the door settles, sticks, or a seal fails within that window, we come back and make it right. If you’re eventually wrapping the wider exterior into a full scope, our Windows & Doors service covers it – and many Richmond homeowners later add a Vinyl Fence in Richmond to finish the property. We work across Richmond from the 94804 flatlands up through the hills.
Get a free on-site door installation estimate in Richmond
Call (833) 997-7759 for a free estimate on door installation in Richmond. A live person answers 24/7 and sets up a visit where we measure the opening, look at the framing and flashing, and hand you a written, line-item price. No pressure, no vague numbers, no surprises. Every job is backed by the 730-Day Done Right Promise and installed by background-checked, uniformed technicians. When you’re ready to see what your door actually needs, call us at (833) 997-7759 and we’ll be there.
Written by the team at Groundwork Construction Co.