Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Oakland Owner’s Guide
We install and replace ActiveYards windows and doors across Oakland, and installed pricing here typically runs $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units, depending on count, glazing, and whether frames are rebuilt. Sash, hardware, and balance work is usually same-day; full unit swaps get scheduled once the exact series and size are confirmed.
Owners rarely call us with a part number. They call because a sash won’t stay up, a door drags on the threshold in the rainy season, or the seal between panes has gone cloudy and they can’t see through it anymore. That symptom is the real starting point, and it tells us more about which ActiveYards part failed than any label ever will.
Key Takeaways
- ActiveYards builds vinyl windows and patio doors in several series, and the part you need depends on which series you own.
- Most failures we see in Oakland trace to hardware, balances, weatherstripping, or a failed glass seal, not the frame itself.
- We’re an independent installer, not affiliated with ActiveYards, and we match parts to your actual unit.
- Every install we do is covered by the 730-Day Done Right Promise.
Which ActiveYards Models This Applies To
ActiveYards covers a family of vinyl products: single-hung and double-hung windows, sliders, casements, awning units, and sliding patio doors, sold under series names that include Pro, Pro Solar, Elegance, and Tranquility. Each series uses its own balance assembly, sash profile, and lock hardware, which is exactly where parts matching goes wrong. A balance from a Pro double-hung will not drop into an Elegance sash, and the tilt-latch spacing differs between them. We confirm the series before we quote anything.
Find the label first. ActiveYards puts a manufacturer sticker in the head jamb channel or on the sash edge, usually visible when you tilt or open the unit. Photograph it before you do anything else. If the label is gone, we measure the visible glass, the frame width and height, and the balance channel depth, and we match from those numbers instead of guessing.
On the OEM question: for a currently produced series, the factory part is the cleanest fit and we source it. For older or discontinued units, a quality aftermarket balance, sash lock, or roller is often the smarter buy, and we’ll tell you plainly when that’s the case and when it isn’t. We don’t claim to stock parts or carry them on a truck. Everything is ordered to your unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Windows & Doors Is Failing
- The sash slides down on its own. The spiral or block-and-tackle balance has lost tension or snapped. Vinyl sashes are heavier than they look, and a dead balance means nothing is holding the weight.
- Cloudy or hazy glass you can’t wipe clean. The sealed insulated glass unit has lost its argon fill and the desiccant is saturated. That’s inside the glass, between the panes, and no cleaner will fix it.
- A patio door that drags or won’t latch. Usually worn rollers or a settled track, sometimes a sash that has racked out of square. In Oakland’s older housing stock, a slightly out-of-level floor makes this worse over time.
- Drafts, whistling, or water at the sill during storms. Weatherstripping, sweep, or the sill gasket has flattened out. Vinyl compresses over years and stops sealing.
- A lock that spins, sticks, or won’t catch. The sash lock, keeper, or tilt latch has worn or the strike has drifted out of alignment. A door that won’t lock is a security problem, not just an annoyance.
Oakland’s marine air and winter rain put real stress on these parts. We regularly see door sweeps and sill gaskets fail faster on west-facing units that take the afternoon fog and wind, and we see balance failures cluster on the larger double-hungs where the sash weight is highest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what window and door work runs in Oakland through us, installed:
| Scope | Installed Price Range |
|---|---|
| Window replacement (standard units) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The range is driven by how many units, glass package (standard vs. low-E vs. impact), whether frames and trim are reused or rebuilt, and how accessible the openings are. Sash and hardware work sits well below those figures and we quote it line by line.
What’s included: the part, labor to fit and adjust it, sealing and weatherstripping, and cleanup. You get the number upfront, and the number you see is the number you pay. The work carries the 730-Day Done Right Promise, so if something we installed fails, we make it right. For larger projects, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (833) 997-7759 for an exact quote.
DIY or Call Us?
Some of this is safe to check yourself. You can photograph the label, tilt the sash to look at the balance channel, wipe and inspect weatherstripping, clean and lubricate rollers, and test whether a lock is misaligned versus broken. None of that risks anything.
Replacing a balance, reseating a sash, or swapping a sealed glass unit is where it goes wrong. A vinyl sash under tension can come down hard, glass units are heavy and easy to crack on removal, and a door re-hung out of square will leak for years. We’d rather you not learn that the hard way. If you’re not sure what failed, call (833) 997-7759 and describe it. Calls are answered by a live person, and our technicians have up to 12 years of experience.
FAQs
The frames commonly hold up 20 to 30 years, but the working parts don’t: balances, rollers, sweeps, and weatherstripping typically need attention in the 8 to 15 year range, and sooner on west-facing doors that take the fog and wind. The sealed glass unit is usually the first big-ticket item to go. Call (833) 997-7759 if you’re not sure how much life is left.
Often, yes. A worn balance, sash lock, roller, or sweep is a repair, not a replacement, and those are the majority of calls we handle. Cloudy glass means the sealed unit has failed and that gets replaced. The whole frame rarely needs to come out unless it’s cracked or the home has shifted badly around it. Call (833) 997-7759 and we’ll tell you which category you’re in.
A hardware, balance, or sweep job is usually done in a single visit. Sash or sealed-glass-unit replacement is most often the same, once the correct part is in hand. Full window or door replacement gets scheduled around the order and the opening count. Call (833) 997-7759 to get your part identified and a timeline.
We identify your ActiveYards series from the label or measurements, then order the factory part when the unit is in production and a quality aftermarket equivalent when it isn’t. We quote it line by line, so you see the part and the labor separately. Call (833) 997-7759 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on other parts of the home, so if your project grows past the window line, you’re talking to the same team.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.