A Groundwork company - serving Oakland, CA

Atlas Windows & Doors in Oakland, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The Oakland Owner’s Guide

We install Atlas windows and doors and the hardware that keeps them working, and in Oakland the typical installed window replacement runs $4,500 – $15,000 depending on how many units and whether it’s an impact-rated spec. If you have a door or window that’s letting in air, sticking, or won’t latch, the part itself is usually the least of the cost. Owners almost always find out something failed the same way: a draft they can feel on the back of their neck while sitting in the living room, condensation between panes in a bedroom, or a sliding door that needs two hands and a hip check to close before the rainy season arrives in Oakland. We’re an independent service provider, not affiliated with Atlas, so we’ll tell you straight when a part is worth replacing and when it isn’t.

Call (833) 997-7759

Which Atlas Models This Applies To

Atlas has several window and door lines, and the part you need depends on which one is in your wall. Before you order anything, pull the manufacturer’s label from the window sash or door frame. On most Atlas units it’s a silver or white sticker tucked into the head jamb or on the sash edge, and it lists the series name, size, and glass spec. Measure the visible glass width and height, then the rough opening if you can access it, because a part cut for one series won’t seat in the extrusion of another. The hardware differences matter too: Atlas sliding doors use particular roller track profiles and lock sets that look like common aftermarket parts but aren’t interchangeable with them. That’s the gotcha most homeowners hit. A quality aftermarket roller or weatherstrip can work fine if the profile matches. For the glass itself and for anything tied to the frame extrusion, OEM spec is the safe choice. We match parts to the label, not to a guess, and we’ll tell you when an OEM part has a lead time worth planning around.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

  • Drafts around the frame or sash. The weatherstrip seal or the sash gasket has compressed and stopped sealing. It’s the first thing to fail in a unit that gets direct afternoon sun, which covers a lot of east-facing windows in Oakland.
  • Fog or condensation between the panes. The insulated glass unit lost its seal and the desiccant is saturated. No cleaning will fix it; the glass unit has to be swapped.
  • A sliding door that drags or jumps the track. Rollers wear flat or the track fills with grit. Left alone, the roller assembly can chew the track itself, and that turns a cheap fix into a frame repair.
  • A door or window that won’t latch or locks hard. The strike plate or lock mechanism has shifted or worn. In a door, this often signals the slab has settled, not just a bad latch.
  • Water staining or soft wood at the sill. Failed flashing or a deteriorated sill seal is letting water in. This one gets worse fast in Oakland’s wet winters and shouldn’t wait.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Oakland owners actually pay for Atlas window and door work, installed:

Service Installed Range
Window replacement (per project) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What moves the number: the number of units, whether it’s a standard replacement or an impact-rated spec, the series and glass package, and whether we find rot or flashing problems once the old unit comes out. We quote parts and labor as separate line items so you can see exactly what the hardware costs versus the install. Every project carries our 730-Day Done Right Promise, so if a seal fails or a door doesn’t latch right, we make it right. Upfront pricing, no surprises: the number you see is the number you pay. Estimates are free and the design consult comes with them.

DIY or Call Us?

Some of this is fine to handle yourself. You can check the label, measure the glass, clean and lubricate a door track, and tighten a strike plate. That’s about where it should stop. Swapping an insulated glass unit is a two-person job with a real risk of cracking the new pane if it’s racked on the way in, and reflashing a sill wrong is how water gets into a wall. If a door or window has settled enough that it won’t latch, adjusting it by force can crack the frame and cost more than the original repair. Our technicians have up to 12 years of experience and know which parts match which Atlas series without guessing. Call (833) 997-7759 and we’ll take a look.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch