Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Oakland Owner’s Guide
If you’ve got a failing CWS driveway or paver system in Oakland, here’s the short answer: replacement or repair runs $7,000 – $18,000 for a paver driveway and $250 – $700 for sealing, and we can usually schedule your estimate within a few days. CWS pavers and driveway systems show their age through joint sand washing out after winter rains, individual pavers rocking underfoot, efflorescence (that white chalky film), settling near the garage apron, and cracking in the base course rather than the surface.
Most Oakland owners notice the problem after the first heavy rain of the season, when water starts pooling against the foundation or the pavers shift visibly. That’s when the phone calls begin.
We’re Groundwork Construction Co. of Oakland, an independent contractor. We’re not affiliated with CWS, but we know the brand’s paver systems and we source compatible materials and replacement components for Oakland properties every week.
Which CWS Models This Applies To
CWS makes driveway and paver products across several series, and the exact replacement component depends on which one you have. The most common residential lines in Oakland are the interlocking concrete paver series and the larger-format slab systems used for driveways and motor courts. The first thing to check is the paver thickness: CWS residential driveway pavers typically run 2⅜ inches (60mm), while heavier-duty commercial series run 3⅛ inches (80mm). Using the wrong thickness in a driveway application causes premature failure.
To identify your series, measure a single paver’s length, width, and thickness with a tape measure, then photograph the surface texture and any markings on the underside or edge. CWS stamps some batches with a mold code. That photo plus the measurements will let us match the OEM part or a comparable aftermarket equivalent from Belgard or another compatible manufacturer.
OEM vs. aftermarket for CWS: OEM keeps your color and texture consistent with the rest of the field. Aftermarket equivalents are often more available and can save 15 – 25%, but you’ll need to verify color family and thickness match to avoid a visible patch. We’ll walk you through both options at the estimate and pull samples so you can see the difference before committing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Joint sand washing out after rain. Oakland’s wet winters strip polymeric sand from joints faster than dry-climate installations, especially on slopes. Once the sand is gone, pavers lose interlock and start to spread.
- Pavers rocking or shifting underfoot. This almost always means the base course has settled or wasn’t compacted to depth. A 4 – 6 inch compacted aggregate base is the standard; anything less fails under vehicle traffic.
- Efflorescence (white chalky film). Moisture migrating through the concrete brings soluble salts to the surface. It’s cosmetic in small amounts, but persistent efflorescence signals poor drainage underneath.
- Settling near the garage apron or street edge. These transition zones take the most load and the most water. If pavers are dipping there, the base has likely washed out.
- Surface cracks vs. structural cracks. A hairline crack in one paver is a cosmetic defect. Cracks that follow a line across several pavers mean the base beneath is moving, and no surface repair will fix it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Oakland owners actually pay, installed:
| Service | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
The range moves on square footage, base depth required, demolition and haul-off, and paver series. A simple overlay on a sound base sits at the low end. A full tear-out with new compacted base, edge restraint, and polymeric sand lands higher. What you get from us: an upfront, line-item quote, the number you see is the number you pay, and all work covered by our 730-Day Done Right Promise.
DIY or Call Us?
You can safely handle a few checks yourself: photograph the failed area, measure paver dimensions, note where water pools, and sweep sand back into joints as a temporary fix. Where DIY goes wrong on pavers is the base. Tearing out and rebuilding a proper compacted aggregate base to 4 – 6 inches, setting edge restraints, and re-sanding correctly is heavy work that requires a plate compactor and a laser level. Homeowners who skip those steps watch their new pavers fail within two winters. Lifting pavers also risks back injury. If the problem is settling, spreading, or base failure, call us. We’ll give you an honest read on whether a targeted repair is worth it or whether the base needs rebuilding.
Reach us at (833) 997-7759 for a free estimate. Calls are answered by a live person, 24/7.
FAQs
How long do CWS pavers last in Oakland? A correctly installed CWS paver driveway lasts 25 – 30 years with sealing every 2 – 3 years. Oakland’s wet winters and clay-heavy soils accelerate settling if the base wasn’t compacted to depth, which is where most premature failures start.
Can the pavers be repaired instead of replaced? Yes, if the failure is isolated. Individual pavers can be lifted, the base re-compacted, and the pavers re-set. If more than about 20% of the field is rocking or the base has washed out across a large area, a targeted rebuild costs less than repeated patch jobs. Call (833) 997-7759 and we’ll assess which applies.
How long does the swap take? A sealing job is usually a single day. A full paver driveway replacement in Oakland runs 3 – 7 days depending on square footage, base condition, and weather. We schedule around rain and don’t leave a job half-finished.
How do you source the CWS-compatible part? We measure, photograph, and verify series and thickness, then source from OEM or a compatible aftermarket manufacturer such as Belgard. We bring samples to the estimate so you approve the color and texture before installation. Call (833) 997-7759 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on other projects, but driveway and pavers is what we’re talking about here.
Groundwork Construction Co. of Oakland has been in business since 2014, proudly serving local communities. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked. Every project is covered by our 730-Day Done Right Promise. Standing offers: $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months.
Call (833) 997-7759 for a free estimate on your CWS driveway or paver project in Oakland. Whether you’re in Rockridge, Temescal, or the Oakland Hills, we’ll give you upfront pricing with no surprises and a written quote you can count on.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.