A Groundwork company - serving Oakland, CA
E

ES Windows Windows & Doors in Oakland, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Oakland Owner’s Guide

We install ES Windows-compatible windows and doors across Oakland, and most full window replacement projects land between $4,500 and $15,000 for a typical home, with impact-rated units running $8,000 to $25,000. If a single unit or part has failed, we diagnose it, match the exact ES series, and quote the fix in writing before anyone touches a frame. Oakland homeowners usually find us the same way: a window that suddenly won’t latch in a Rockridge bungalow, a sliding door off its track in a Fruitvale duplex, or condensation fogging the glass on a west-facing unit near the bay, weeks after they noticed a draft they couldn’t place.

Call (833) 997-7759

Which ES Windows Models This Applies To

ES Windows builds primarily in vinyl and aluminum, and its product lines split into distinct series that rarely share parts. The two things that tell us which generation you have are the certification label on the upper corner of the glass or the frame, and the AAMA or NFRC sticker showing the series and performance rating. If the label has been painted over or weathered off, measure the visible glass width and height and the frame depth – a difference of an eighth of an inch in the sill channel changes which sash, balance, or weatherstrip we order.

The OEM versus aftermarket decision matters more with ES than with some brands. ES-specific hardware, tilt-latch assemblies, and certain balance cartridges are often only available through the manufacturer or a distributor, while standard glazing, weatherstripping, and screen frames have quality aftermarket equivalents that cost less and hold up the same. We tell you plainly which is which. We’re an independent service provider and not affiliated with ES Windows – we simply know the product and order the correct part for your specific series and vintage.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

  • The sash won’t stay up. The balance spring or constant-force coil has lost tension, common on ES single and double-hung units after years of daily use. The glass isn’t the problem; the counterbalance is.
  • Water pooling in the sill track after storms. Clogged weep holes or a compressed weatherseal let Oakland’s winter rain back up behind the sash. Left alone, that moisture reaches the framing.
  • Condensation trapped inside the glass. Fog between the panes means the insulated unit’s seal has failed. The airtight barrier is gone, and the window’s energy performance is gone with it.
  • A sliding door that drags or jumps the track. Worn rollers or a bent track rail on an ES patio door. In older El Cerrito and Temescal homes, settling foundations make this worse than the roller itself.
  • Drafts or daylight around the frame. Failed perimeter sealant or shrinking weatherstrip around the rough opening. This is usually the easiest and cheapest fix if it’s caught before water intrusion starts.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Oakland runs $4,500 to $15,000 for a whole-home job, and impact window installation runs $8,000 to $25,000 depending on unit count and rating. For a single failed part – a balance, a sash, a roller, weatherseal – we quote the part and labor as separate line items so you see exactly what you’re paying for. The range moves with the ES series, whether the part is OEM or a quality aftermarket equivalent, the number of units, and any frame or sill repair needed behind the failure.

Project Installed Range in Oakland
Full window replacement (whole home) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Single part or sash repair Quoted as line-item parts plus labor

Every project we take on is covered by our 730-Day Done Right Promise, backed in writing, and priced upfront with no change orders once work starts.

DIY or Call Us?

You can safely check the certification label, wipe out weep holes, clear debris from the sill track, and test whether a sash drags or a door roller binds. That’s diagnosis, and it’s useful. Where it goes wrong is lifting a sash out of a frame to replace a balance or spring, forcing a warped frame to accept a new unit, or breaking the seal on an insulated glass unit trying to reseal it yourself – those failures lead to cracked glass, damaged frames, and injury from spring tension. On anything involving tensioned balances or unsealing glass, call us. A technician with up to 12 years of experience handles the swap and checks that the new part fits your ES series before we call it done. Call (833) 997-7759 to schedule your free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch