Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Oakland Owner’s Guide
We build and finish Mr-Glass-compatible home additions and ADUs for Oakland homeowners, and the all-in installed range we quote most often is $45,000 to $130,000 for an addition and $90,000 to $220,000 for a detached ADU. The failed-part scenario on this page is usually a door, window, or glazing component inside the addition envelope rather than the structure itself: a sliding patio door that won’t track, a sealed unit that’s fogged between the panes, a threshold that leaks at the slab. Groundwork Construction Co. of Oakland is an independent builder, not affiliated with Mr-Glass.
Oakland owners tend to notice the problem at the first rainy season. A patio door that stuck in July starts weeping brown water onto the floor plate in November, and by then the subfloor near the track has been wet for weeks. That’s the pattern we see most in the flats and the hills alike.
Key Takeaways
- Additions in Oakland run $45,000 – $130,000; detached ADUs run $90,000 – $220,000.
- Most “failed part” calls trace to doors, windows, or glazing inside the addition, not the framing.
- We hand-match the part to your Mr-Glass model using labels and measured rough openings.
- House-moving is dangerous, but the parts that fail most are safe to inspect yourself.
- Every job carries our 730-Day Done Right Promise.
Which Mr-Glass Models This Applies To
Mr-Glass parts are matched by series and rough opening, not by the color of the frame. Before we order anything, we pull the label off the door or window jamb (usually a silver or white sticker with a model code and a size callout), photograph it, and measure the rough opening in three places: top, middle, bottom. That last step matters. We regularly find that an opening is a half inch out of square, which is why the original unit worked loose in the first place.
Once we have the code, the OEM-versus-aftermarket call comes down to what’s in the wall. For structural and exterior parts, we lean OEM or a named equivalent because the sealing system has to match the frame profile exactly. For interior hardware and trim, a good aftermarket equivalent is fine and usually cheaper. We don’t have a warehouse of parts or a truck stocked with them, so ordering is scheduled against your install date. We also service KraftMaid, Cambria, and Silestone cabinetry and stone if your addition includes a kitchen or bath finish-out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
Most failing parts announce themselves months before they cause real damage. Here’s what to watch for in an Oakland addition:
- Water on the floor plate after rain. A failed threshold seal or a rotted sill lets water track under the door, and it pools where you can’t see it until the subfloor swells.
- Fogging between the window panes. The sealed unit lost its gas fill, so the glass no longer insulates and the interior sweats constantly.
- A door that drags or won’t latch. The rollers, hinges, or track have worn or the frame has shifted, usually from seasonal movement in the clay soils common across Oakland.
- Daylight or a draft around the frame. The foam or flashing at the rough opening has failed, which is a real energy and moisture problem, not just a comfort complaint.
- Sticking that gets worse each year. The addition has settled slightly against the main house, and the connection point is taking the load instead of the parts.
If any of these show up, it’s worth a look before the next rain. Call (833) 997-7759 and we’ll get eyes on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
The all-in installed range for an addition in Oakland is $45,000 to $130,000, and a detached ADU is $90,000 to $220,000. A garage conversion runs $30,000 to $80,000. Here’s what moves the number:
- Size and foundation. Slab-on-grade versus crawl space, and how much grading the lot needs, swing the price more than finish choices do.
- Which parts failed. A single sealed window unit is a small line item; a full patio door assembly with a rotted threshold is larger because it touches framing and flashing.
- Structural tie-in. How the addition connects to the main house, including any beam or header work at the opening.
- Permits and inspection. Oakland’s permitting is part of the quote and we pull it for you, with no change orders once work starts.
Our pricing is upfront: the number you see is the number you pay. Every job is backed by the 730-Day Done Right Promise. We also offer $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months.
DIY or Call Us?
Some of this you can safely check yourself. You can measure the rough opening, read the label on the jamb, photograph the water stains, and test a door’s rollers. What you shouldn’t do yourself is open a wall to move a header, lift a heavy patio door out of its frame alone, or work at height on glazing. Structural and heavy-glazing work belongs with people who do it every day, and doing it wrong on an addition means water intrusion and a failed inspection.
If you’re not sure whether the part is the problem or the frame behind it, that’s the call to make. Call (833) 997-7759 for a free estimate. A live person answers around the clock, and our technicians are background-checked and arrive in uniform.
FAQs
Sealed glass units and door hardware typically run 10 to 20 years, but in Oakland’s marine-layer humidity and salt air, seals fail on the shorter end. Hardware lasts longer if it’s cleaned and lubricated each year.
Sometimes. A sticking door often just needs new rollers, and a single fogged unit can sometimes be re-glazed. But a failed seal, rot at the threshold, or a settled frame usually means replacement, and we’ll tell you plainly which one you’re facing.
A door or window part swap is often a single visit. Anything touching framing, flashing, or a header is scheduled over a few days so the seal and inspection are done right.
We cross-reference the model code on your jamb label, confirm the current seat and seal spec, and match it against the measured rough opening before ordering. We don’t carry parts on a truck, so timing is scheduled to your install.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.