A Groundwork company - serving Oakland, CA
M

Mr-Glass Roofing in Oakland, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Roofing: The Oakland Owner’s Guide

We install and repair Mr-Glass roofing systems across Oakland, and most residential roofing work here lands between $400 and $1,800 for a targeted repair and $8,000 to $20,000 for a full replacement. When a Mr-Glass panel, flashing piece or fastener fails, the first clue is usually a brown ring on a ceiling in the back of the house after a storm, or grit from a worn panel collecting in a gutter downspout. Owners in Oakland tend to notice it in January, when the rain finally finds the weak spot the summer hid. We aren’t affiliated with Mr-Glass. We’re an independent contractor that works on their systems and matches parts to your model.

Call (833) 997-7759

Which Mr-Glass Models This Applies To

Mr-Glass has built roofing panels and accessories across several product families over the years, and the part that fits one generation won’t fit another. The real compatibility gotcha is thickness: panel profiles that look identical from the top of a ladder can differ in substrate gauge and rib spacing, and a panel cut for one gauge will sit proud, hold water at the lap, or fail to seat in the original flashing. Before we order anything, we measure the existing panel width, the rib pitch and the exposed fastener spacing, then read the printer’s mark or embossed code stamped on the underside of an existing panel. That code ties back to the exact series. On older Oakland roofs, the marks are often gone, so measurements carry the day.

Then comes the OEM-versus-aftermarket call. A genuine Mr-Glass part guarantees an exact match to your original profile and color lot. A quality aftermarket equivalent can match the profile and meet code at a lower cost, though the color won’t always match a weathered panel exactly. We tell owners which route we recommend and why, in writing, before we order. If you have Mr-Glass kitchen or bath finish products under the same roof – or KraftMaid, Cambria or Silestone in the house – we can look at those on the same estimate visit if you want.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Roofing Is Failing

  • Water staining on ceiling or rafters. A failed lap or lifted fastener lets water track along the panel underside. The stain shows up feet from the actual leak, which is why we trace the path, not just the wet spot.
  • Lifted or backed-out fasteners. Fasteners work loose as panels expand and contract in Oakland’s warm days and cool nights. Once the washer seal dries and cracks, the screw becomes a leak point, not a hold-down.
  • Panel cracks, crazing or chalky surface. Sun exposure breaks down the panel surface over time. A chalky, faded finish and hairline cracks mean the material is near the end of its service life.
  • Grit in the gutters. Granules or substrate dust washing off the roof collect in the downspouts. Heavy grit is a strong sign a panel is breaking down from the top surface.
  • Loose or split flashing at vents and walls. Flashing takes the worst of the weather. Split sealant and lifted flashing at a vent boot or wall junction is where a surprising number of Oakland leaks start.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what roofing work runs in the Oakland market, parts and labor shown together so there are no surprises later:

Work Typical installed range
Roof repair (leak, flashing, fasteners, localized panel) $400 – $1,800
Tile roof repair $600 – $2,500
Roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

The range moves with roof size, pitch, how much decking needs repair underneath, and whether we’re matching an existing panel or replacing a whole slope. Our quotes are line-item and upfront: you see the part cost and the labor separately, and the number you approve is the number you pay. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – and all work is built to last and backed in writing.

DIY or Call Us?

Some checks are safe to do yourself. From the ground with binoculars, you can spot lifted fasteners, cracked panels, staining and loose flashing; inside, you can note where stains appear. What you shouldn’t do is climb onto a pitched roof to replace a panel or reset flashing yourself. Roof work means height, and a fall is the real risk here, not the part. Panel swaps also go wrong when the new piece is cut to the wrong gauge or the flashing isn’t re-sealed correctly, and a bad lap leaks worse than the original. We send background-checked, uniformed technicians, and our calls are answered by a live person around the clock. Call (833) 997-7759 and we’ll take a look.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 997-7759
Local Service Coverage

Request a Free Estimate in Oakland

Tell us what you need - Groundwork Construction Co. of Oakland responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch