Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Oakland Owner’s Guide
We install Schluter-compatible driveway and paver assemblies across Oakland, and most full paver driveway projects here run $7,000 – $18,000 installed, depending on square footage, base prep and drainage. The “part” on a Schluter driveway system is rarely a single component you swap in an hour like a garage spring. It’s the layer under the pavers: the Schluter drainage mat, edge profile, or decoupling membrane that Schluter engineered for exterior hardscape. When one of those fails, Oakland owners usually find out the slow way. Paver joints start shifting after a wet winter. Water pools against the garage slab instead of draining off. A field of pavers near the curb dips a half-inch and stays that way. Then the call comes in.
Which Schluter Models This Applies To
Schluter’s exterior hardscape side is narrower than the tile catalog most people know. For driveways and pavers, the relevant product lines are Schluter-DITRA-DRAIN (the dimpled drainage membrane with a filter fleece), Schluter-TREP-E and TREP-EK (stair-nosing profiles rated for exterior use), and the Schluter-DILEX-EK movement profile for perimeter joints. If your driveway or paver patio was built with a linear drainage channel, it may be a Schluter-KERDI-LINE assembly. Check the printed edge of the mat or profile: Schluter stamps the product name and lot code on the fleece or the profile’s anchoring leg. If the print is gone, measure the mat thickness (DITRA-DRAIN is roughly 8 mm at the dimple) and photograph it before you call anyone. OEM Schluter mat is worth specifying over generic dimpled plastic. The fleece weight and filter geotextile are what keep Oakland’s clay-heavy soils from clogging the drainage cavity, and the knockoffs skimp on exactly that. We’re an independent installer and not affiliated with Schluter, so we’ll tell you plainly when an aftermarket equivalent is fine and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
Oakland’s rainy season and expansive clay soils punish exterior drainage assemblies in predictable ways. Here’s what failure looks like:
- Water sheeting toward the house instead of the street. The drainage mat’s cavity has clogged with fines, so it can’t move water laterally to the outlet. Oakland’s adobe clay is the usual culprit when the mat wasn’t paired with the right filter fleece.
- Pavers rocking or settling in one zone. That’s base erosion under the membrane, not a paver problem. A failed joint at the edge profile lets water into the bedding sand and it migrates.
- Efflorescence blooming along the garage slab. White salt staining means moisture is wicking sideways instead of draining down and away. It’s the clearest early sign a drainage layer has stopped working.
- Visible tears or delamination at the profile edges. Schluter edge profiles detach when the thinset bond at the anchoring leg breaks. Once water gets behind the profile, freeze-thaw isn’t the issue in Oakland; constant wet-dry cycling is.
- Ponding that lingers 24 hours after rain. Standing water on a paver field means the slope or the drainage cavity, or both, are compromised. It won’t fix itself with more sand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
There’s no honest one-line price for a Schluter exterior assembly, because the “replacement” is usually a section, not a part. Here’s how Oakland pricing breaks down:
| Scope | Installed Range (Oakland) |
|---|---|
| Drainage mat / membrane section repair (targeted) | $900 – $2,800 |
| Paver relaying over new Schluter drainage assembly (small area) | $2,500 – $6,000 |
| Full paver driveway installation with Schluter drainage layer | $7,000 – $18,000 |
| Paver patio installation with drainage | $3,500 – $11,000 |
| Edge profile and movement joint replacement | $400 – $1,600 |
What drives the range: square footage, how much base has to come out, whether the slope needs re-grading to code, and whether the existing pavers can be salvaged. We quote line items, not a lump sum, and the number you see is the number you pay. Every driveway and paver project we complete is backed by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right, for two full years. Call (833) 997-7759 and we’ll walk through the scope with you.
DIY or Call Us?
Some things are safe to check yourself. Some aren’t worth the risk. You can pour a bucket of water on the paver field and watch where it goes. You can lift one paver at the edge with a margin trowel and see whether the mat underneath is intact or clogged. You can photograph the profile print and measure specs. What we don’t recommend is pulling up a bonded edge profile or cutting into a drainage assembly that ties into your foundation waterproofing. On exterior hardscape, a DIY repair that compromises the drainage plane or the slope can push water toward your slab, and that becomes a structural problem fast. If the water is going the wrong way, stop. Call (833) 997-7759 and we’ll confirm the scope on a free estimate.
FAQs
How long does a Schluter exterior drainage assembly last?
Ten to twenty years when installed over a properly compacted base with the correct filter fleece. In Oakland’s clay-heavy soil, the lower end of that range is realistic if the base wasn’t graded to shed water. Call (833) 997-7759 for a free estimate if yours is past that window.
Can it be repaired instead of fully replaced?
Often yes. A clogged section of drainage mat or a single failed profile can be cut out and re-set without touching the whole driveway. If more than a third of the field is compromised, full replacement is usually the honest call. We’ll tell you which, in writing, on the free estimate.
How long does the swap take?
A profile or membrane section repair is one to two days. A full paver driveway installation with a Schluter drainage layer runs three to seven days depending on square footage and weather. We schedule around Oakland’s rainy season and tell you the completion window up front.
How do you source the Schluter part?
We source through Schluter’s authorized distribution network for exterior hardscape, which is the only way to land genuine mat and profile with warranty coverage. We don’t stock parts on trucks; every component is ordered to your project. Call (833) 997-7759 to schedule your free estimate.
Groundwork Construction Co. of Oakland also services kitchens and baths with KraftMaid, Cambria and Silestone, so we can help across the whole property, not just the driveway. Every project comes with live 24/7 phone coverage, background-checked uniformed technicians, $1,000 off projects over $10,000, and 0% financing for 18 months. Call (833) 997-7759 to schedule your free estimate today.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.