Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Oakland Owner’s Guide
We install Schluter-spec home additions and ADUs in Oakland, from the waterproofed wet-wall assemblies in a new bathroom pod to full room additions off the back of a bungalow. Typical installed pricing for a home addition runs $45,000 – $130,000, and a full ADU runs $90,000 – $220,000; we schedule these as planned projects, not emergency drop-ins. Groundwork Construction Co. of Oakland is an independent service provider and is not affiliated with Schluter Systems.
Owners usually find the problem after water does: a hairline crack through grout at the shower curb, a soft spot in the drywall below a new bathroom, or a tile that wrings slightly underfoot weeks after the addition’s first wet winter. In Oakland’s older stock, that often traces to a Schluter assembly that was specified wrong, mixed with the wrong thin-set, or installed over a subfloor that never met the spec.
Key Takeaways
- Installed additions in Oakland: $45,000 – $130,000. ADU construction: $90,000 – $220,000.
- Schluter assemblies are system-specific; a part that fits one membrane line does not fit another.
- Most failures in our area trace to subfloor movement, wrong thin-set, or skipped perimeter movement joints.
- 730-Day Done Right Promise covers our workmanship, in writing.
Which Schluter Models This Applies To
Schluter sells systems, not loose parts, and each system uses its own geometry. DITRA and DITRA-XL uncoupling membranes are 1/8″ and 5/16″ thick respectively, with a 3/16″ or 5/16″ square grid; DITRA-HEAT is a different profile entirely because it carries heat cable in its studs. KERDI waterproofing membrane, KERDI-BOARD foam panels, and the KERDI-SHOWER line (shower trays, curbs, drains) each take their own flange, fleece, and drain-bonding components. A KERDI-DRAIN body will not accept a KERDI-LINE linear drain cover, and a KERDI-SHOWER-T tray is sized for specific curb and drain configurations.
Identify what you have before you shop. Check the printed name and dimensions on the membrane edge or the foam panel face; photograph the drain flange, the membrane print, and the thin-set bag if you still have it. If a prior contractor used an equivalent gray fleece membrane sold under a different label, it may look identical and bond only to that brand’s proprietary mortar.
The OEM-vs-aftermarket call in this category is not the same as with a faucet cartridge. A genuine Schluter component is what keeps the system warranty intact and the drainage geometry correct. Third-party “uncoupling” roll may save a few dollars per square foot and fail the first time a 1930s Oakland pier-and-beam floor flexes in a dry season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
- Grout cracks along a straight line at the shower curb or room perimeter. That line is usually a missing or crushed movement joint, and the tile has nowhere to expand.
- Tile sounds hollow or “drums” when tapped. Thin-set lost its bond to the membrane or panel, most often because the mortar was mixed too dry or the wrong class was used over a foam surface.
- Soft drywall or stain below the new bathroom. Water is escaping the shower assembly at the curb, the drain seal, or a seam in the waterproofing, not through the tile face.
- Lippage or a step between adjacent tile edges. The uncoupling layer was installed over a subfloor that flexes beyond spec, and the deflection is transferring upward.
- A cold spot or dead zone in a heated floor section. A cable in the DITRA-HEAT grid was nicked during tile setting, or the thermostat probe was laid in the wrong zone.
These symptoms tend to show up after the first rainy season, not on delivery of the tile. That is worth knowing when you’re evaluating a contractor’s warranty language.
Replacement Cost & What’s Included
Repairing or rebuilding a failed Schluter assembly in an Oakland addition is a project cost, not a parts counter transaction. Here’s how the line items actually land in this market:
- Targeted shower assembly repair (curb, drain seal, or localized membrane): $1,800 – $5,500
- Full shower rebuild with new Schluter drain and waterproofing: $4,500 – $12,000
- Bathroom remodel including corrected wet-wall system: $9,000 – $28,000
- Home addition: $45,000 – $130,000
- ADU construction: $90,000 – $220,000
- Garage conversion (common path to an in-law unit): $30,000 – $80,000
The range depends on how much tile has to come out to reach the failed layer, whether the subfloor needs remediation, and whether the drain can be reused. We give written, line-item pricing before work starts, and the number you see is the number you pay. Every project is covered by the 730-Day Done Right Promise, and the job is permitted and inspected where Oakland requires it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a lot without opening anything. Look for cracked caulk at inside corners, photograph the thin-set bag and membrane print for a record, use a moisture meter on the drywall below the shower, and read the strainer on the drain flange to see which Schluter drain body you have. That information shortens the estimate.
What goes wrong with DIY here is not dangerous like electrical work or a garage-door spring, but it is expensive. Schluter systems fail when a homeowner trowels thin-set with the wrong notch, skips the fleece-to-membrane bond, or installs DITRA over a subfloor that deflects beyond the published limit. The tile looks fine. It stays fine for about two winters. Then the grout cracks, water finds the seam, and the fix costs more than the original install.
The honest path is to get the assembly specified correctly from the start. Call (833) 997-7759 for a free estimate.
FAQs
A properly installed Schluter assembly should last the life of the tile finish, 25 to 40 years or more. The lifespan depends on the subfloor, correct thin-set selection, and movement joints, not on the membrane itself. Oakland’s dry-season foundation movement is the wild card that decides whether a marginal install survives. Call (833) 997-7759 for an exact quote on a repair; estimates are free.
Often yes, if the failure is localized. A cracked curb, a failed drain seal, or a single dead heat zone can usually be opened, corrected, and retiled without tearing out the whole room. If water has reached the framing or the entire bed is unbonded, a full rebuild is the honest answer. We’ll tell you which one you’re looking at after we open it up.
A localized shower repair is usually a few days. A full bathroom rebuild runs three to five weeks; a home addition runs several months, and an ADU in Oakland takes longer once you add plan review and permitting. We’ll put the schedule in writing with the bid so you can plan around it.
We specify the exact Schluter system and dimensions in the bid, order through authorized distribution, and inspect the shipment against the spec before it hits the site. We don’t carry parts on a truck and don’t claim to stock Schluter locally; we bring the correct component to your job. If you’ve been researching other finishes, we also install KraftMaid, Cambria, and Silestone and can coordinate those into the same project.
Get a Written, Line-Item Estimate
If your addition’s wet area is showing cracks, soft spots, or a drain that won’t hold seal, or if you’re planning an Oakland addition or ADU and want the assembly specified right from day one, call (833) 997-7759. We answer live around the clock, give written pricing with no surprises, and back every job with the 730-Day Done Right Promise and our technicians’ up to 12 years of experience. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available, and we’re glad to walk your project from foundation to finish line.
Written by the team at Groundwork Construction Co. of Oakland, serving Oakland and nearby areas.