Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Oakland Homeowners Choose Toto Construction
Toto construction service in Oakland means remodeling a bathroom around a Toto toilet, Washlet or sink that’s staying put, rather than swapping the fixture for whatever’s on the shelf. Groundwork Construction Co. of Oakland handles the construction side of that work every week in the East Bay: rough-in corrections, tile, vanities and enclosures, with licensed plumbing coordinated so the Toto is set true, sealed and serviceable from day one. We’re an independent Toto service provider, not affiliated with or authorized by Toto, and we say so plainly.
Why Trust Groundwork Construction Co. of Oakland for Your Toto Construction?
Our technicians have up to 12 years of experience with Toto fixtures, and the model knowledge is what matters. A technician who knows the difference between a CST743 Drake and a CST776 Drake II doesn’t guess at a flush problem. They know the G-Max tower in an older Drake behaves differently from the Tornado tower in a Vespin II, and they know a skirted Ultramax II hides its tank-to-bowl gasket behind porcelain that has to come off the floor before anything can be reached.
We specify OEM-compatible parts wherever Toto still makes them, which keeps the fixture’s original performance and protects the warranty. Pulling a Toto and re-setting it is a construction job, not a plumbing swap: the flange gets checked, the wax ring gets replaced, the subfloor gets inspected for soft spots, and the tile gets cut back in. Every project carries our 730-Day Done Right Promise, and the price you approve up front is the price you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Oakland
These are the failures we run into most often on Toto fixtures in Oakland bathrooms, and why they happen:
- Drake and Ultramax toilets that run constantly or flush weak. The fill valve and flapper wear out first, usually between year 8 and year 15. A phantom refill at 2 a.m. is almost always a flapper that no longer seats or a fill valve that won’t shut off. Cheap to fix, easy to ignore until the water bill shows up.
- A failed G-Max or Tornado flush tower. When the tower assembly stops sealing, you get a weak flush and a bowl that refills on its own. The part is replaceable on most two-piece Drakes, but on a one-piece the tank has to come off to reach it.
- Skirted one-piece leaks on Ultramax II and Vespin II models. The tank-to-bowl gasket fails, and because the skirt covers the whole base, the fixture has to be pulled completely. That’s a tile-and-subfloor job: reset the flange, new wax ring, verify rough-in, re-tile the footprint.
- Washlet seats tripping the GFCI, going dark, or leaking at the inlet. Years of hard Bay Area water scale up the inlet screen and strain the connection. A dead display is often an outlet or GFCI problem, not the seat itself, which is why outlet placement matters on a remodel.
- Rough-in mismatch in pre-1960s Oakland homes. Plenty of these bathrooms were framed for a 10-inch rough when a 12-inch Toto is what the owner bought. The fixture won’t sit properly without a remodel flange or an offset adapter, and forcing it causes leaks at the base.
Oakland’s housing stock makes all of this harder. Rockridge and Temescal bungalows and West Oakland Victorians were built before anyone thought about a 1.28-gallon flush, and opening a wall in one of them routinely turns up knob-and-tube wiring or an unpermitted older addition. When a bathroom gets gutted, the building department may want an engineering letter before even modest structural changes in a pre-1970 home. We plan for that instead of discovering it mid-job.
Toto Parts & Our Repair-vs-Replace Approach
We specify genuine Toto fill valves, flappers, gaskets and flush towers for toilets, and OEM inlet screens for Washlets wherever those parts still exist. When Toto has discontinued a part, we fall back to well-regarded aftermarket fill valves rather than improvising with something generic. Parts are ordered per job; we don’t claim to stock Toto locally.
Repair versus replace is an honest call, not a sales one. If a 15-year-old skirted toilet needs a full tear-out and the bowl and tank are sound, pulling it, replacing the gasket and re-tiling the footprint is usually worth it. If the porcelain is cracked or the flush tower is obsolete, replacement during a bath remodel makes more sense than chasing parts.
Call (833) 997-7759 and we’ll tell you which side of that line your fixture is on.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We confirm the model and series, then check fill valve, flapper and flush tower before assuming the worst. On a skirted one-piece we plan for a full pull from the start so there are no surprises.
- 2
Rough-in verification. The flange, wax ring and rough dimension get measured against the fixture’s spec sheet. In an older Oakland bathroom, this is where 10-inch versus 12-inch gets settled.
- 3
Repair or install. OEM parts go in, the fixture is set level and sealed, and tile is cut back in cleanly. Washlet installs get a dedicated GFCI outlet within reach of the cord.
- 4
Test. Multiple flushes, a fill-level check, a leak check at the base and a live test of every Washlet function.
- 5
Warranty and handoff. Workmanship is covered by the 730-Day Done Right Promise, documented in writing before we leave.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Oakland
We work on the Drake and Drake II two-piece lines (CST743, CST454, CST776), the Ultramax II and Vespin II one-piece skirted toilets, and Washlet and Washlet+ electronic bidet seats including the S350e, S550e and C5. We also handle EcoPower and EcoFlush high-efficiency models, which show up in older Oakland remodels where water use and rough-in depth both matter. Sinks and lavatory fixtures fall under the same scope. If your model isn’t listed, call and describe it.
We Also Service These Brands
Groundwork Construction Co. of Oakland isn’t a single-brand shop. Alongside Toto, we work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so a bathroom or kitchen can be planned around the brands you actually want instead of what one supplier happens to carry.
FAQs – Toto Construction Service in Oakland
No. We’re an independent Toto service provider with no affiliation to or authorization from Toto. That means we work on Toto fixtures because we know them, not because a manufacturer program sent us. You get the same straight pricing and 730-Day Done Right Promise as any other job we take on in Oakland.
It’s usually the flapper first, then the fill valve. A flapper that no longer seals lets water trickle into the bowl, the fill valve kicks on to top the tank back up, and you hear it cycle all night. A fill valve that won’t shut off causes a constant refill instead. Our technicians check both plus the flush tower, since a worn G-Max tower can mimic a flapper problem. Call (833) 997-7759 for an exact quote on the repair.
Yes, a GFCI-protected outlet within cord reach of the seat, and it needs to be accessible rather than hidden behind the fixture. Most older Oakland bathrooms don’t have one anywhere near the toilet, which is why Washlet installs get planned into the remodel instead of added after the tile goes down. A tripping GFCI is often the outlet, not the seat, and a dedicated circuit solves it.
Yes, but not with an off-the-shelf 12-inch model forced into place. Homes built before 1960 in Oakland commonly have a 10-inch rough, and a 12-inch Toto will either sit too far off the wall or leak at the base. The fix is a remodel flange or an offset adapter, installed as part of the job. We measure the rough before anything is ordered, so the fixture that shows up actually fits. Call (833) 997-7759 to schedule a free estimate.
Repair if the porcelain is sound; replace if it’s cracked or the flush tower is discontinued. A 15-year-old Vespin II that needs a tank-to-bowl gasket is a straightforward repair, even though the fixture has to come out to do it. A cracked bowl or an obsolete tower tips the math toward a new fixture, especially when the bathroom is already open for remodeling. Call (833) 997-7759 for an honest read on your fixture.
It depends on whether you’re repairing around the fixture or remodeling the room it sits in. Bathroom remodels that include a Toto re-set or replacement run $9,000 to $28,000; a small bathroom remodel runs $5,000 to $12,000. Walk-in showers land at $4,500 to $12,000 and tub-to-shower conversions at $3,500 to $10,000, while vanity installation alone is $800 to $3,000. Every quote is line-item and upfront, with $1,000 off projects over $10,000 and 0% financing for 18 months available. Call (833) 997-7759 for your free estimate.
Book Your Toto Service in Oakland, CA
Whether it’s a running Drake in Temescal, a leaking Ultramax II in Rockridge, or a full bathroom remodel in West Oakland with a Washlet going in, call Groundwork Construction Co. of Oakland at (833) 997-7759 to schedule your free estimate. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.