Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Daly City, CA: What It Costs and How Long It Takes
A chain link fence in Daly City runs $3,500 – $9,000 installed, with most residential jobs landing between $4,200 and $6,800 depending on height, gauge, footage, and how much hill the posts have to fight. Most runs finish in two to four working days once we’ve confirmed property lines. Because so much Daly City ground sits on wind-blown sand and steep graded cuts, layout and footing work eat more of the schedule here than the fence itself does. Call (833) 997-7759 for a free on-site estimate.
The Five Stages of a Chain Link Fence Job, Start to Finish
Chain link isn’t a complicated build, but on Daly City hillsides the prep and footing work decides whether the fence stays plumb after the next rain season. Here’s the actual sequence.
Stage 1: Site walk and line agreement (1 – 2 days)
We walk the property, confirm corners against your plat or survey, and mark the post line. On sloped lots off the Mission Street corridor, that means checking where the grade breaks and whether a stepped or racked run will hold the line better. If there’s no recent survey, we recommend one; a fence built 18 inches into a neighbor’s yard costs more to remove than the survey costs to buy.
Stage 2: Utility locate and demo (1 day)
We call for the standard utility locate before any digging. Then we pull the old fence, cut back overgrowth, and haul it off. Homeowners decide here whether any old concrete footings get broken out and re-poured or reused with new post brackets. On the sandy fill lots above the Mission Street corridor, we usually over-dig and over-pour rather than trust the existing concrete, which often turns out to be a shallow 1950s footing.
Stage 3: Post holes, footings, and cure (1 – 2 days plus a cure window)
This is the stage that separates a fence that lasts from one that leans. We set posts in concrete deep enough to bite into stable ground, not just the dune topsoil. On steep Daly City lots, we often add extra intermediate posts on the slope so the fabric doesn’t gap underneath. Fast-setting concrete lets us hang fabric the same day; standard concrete wants overnight. Homeowners pick the post spacing here, typically 8 or 10 feet.
Stage 4: Rails, fabric, and gates (1 day)
Top rail, tension bands, and chain link fabric go up and get stretched. Gates get hung on their own posts with heavier frames and proper hinges so they don’t sag. You’ll confirm gate width and swing direction before we set those posts, since that decision is nearly impossible to change once the concrete cures.
Stage 5: Walkthrough and cleanup (same day)
We tighten the top rails, check every gate latch, rake out the spoils, and walk the full run with you. Any adjustments happen before we leave. That walkthrough is where the 730-Day Done Right Promise starts: if a post settles or a gate droops, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Choices You’ll Actually Make
A chain link fence isn’t one product. The upgrades below change both the price and how the fence handles Daly City weather.
- Gauge: 11.5-gauge (common residential) versus 9-gauge (heavier, tighter-mesh look, roughly 20 – 30% more per foot). On windy west-facing lots, the heavier gauge distorts less over a decade.
- Coating: Galvanized steel versus vinyl-coated. Galvanized is cheaper and fine in dry climates, but the fog here soaks bare metal; vinyl-coated in black or forest green resists rust far better and looks less like an industrial lot.
- Height: 4-foot, 5-foot, or 6-foot. Six-foot is the standard privacy-and-pet height; on steep grade transitions we often mix heights so the top line stays level.
- Fabric and mesh: Standard 2-inch diamond versus smaller 1-inch mesh for small dogs. Privacy slats snap into the diamond if you want visual screening later without a full rebuild.
- Brand: We source through established manufacturers like Barrette when a job calls for a coated system with a real warranty, and we’re upfront about when a commodity panel is the smarter buy.
Homeowners often pair a new fence with fresh hardscape so the yard reads finished; Concrete Driveways & Concrete Work in Daly City and Asphalt Driveways & Resurfacing in Daly City are two projects that make sense to run alongside the fence line, since the crews are already mobilizing.
What a Chain Link Fence Costs in Daly City, CA
Plan on $3,500 – $9,000 for a residential chain link fence in Daly City, installed.
| Line item | Typical range |
|---|---|
| Standard 4 – 5 ft galvanized run, 100 – 150 ft | $3,500 – $5,200 |
| 6 ft vinyl-coated run, 150 – 200 ft | $5,800 – $8,900 |
| Extra gate, framed | $400 – $900 each |
| Steep-slope post reinforcement | $300 – $800 |
| Old fence demo and haul-away | $400 – $1,000 |
| Privacy slats (add-on) | $8 – $15 per foot |
What pushes a job toward the high end:
- Linear footage and height. Bigger runs and taller fences scale the number almost linearly.
- Slope and soil. Steep cuts and sandy fill mean more posts, deeper footings, and stepped sections; this is the biggest swing variable in Daly City.
- Gauge and coating. 9-gauge vinyl-coated runs cost meaningfully more than 11.5-gauge galvanized.
- Gates. Each gate is its own framed unit with heavier posts.
- Site access and demo. A backyard fence with a narrow side access to haul materials through takes longer than an open street-side run.
A written estimate from us itemizes posts, gauge, coating, gates, concrete, demo, and haul-away line by line, so the number you see is the number you pay. Call (833) 997-7759 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Ground Does to a Chain Link Fence
Daly City sits on wind-blown sand dunes and steep fog-belt slopes on San Bruno Mountain’s western flank, and that shapes every fence we set here. On the hillside streets above the Mission Street corridor, footings have to go past the loose dune layer into something that actually holds, or the first winter storm racks the run out of plumb. The persistent Pacific fog and offshore wind keep west-side neighborhoods like Westlake and Serramonte damp most of the year, so galvanized posts rust faster than they would in sunnier parts of the Peninsula. The rain season concentrates hillside runoff, which is why we check drainage paths before we dig. And on the dense streets along El Camino, thin lots mean the property line often sits close to a neighbor’s structure, so we confirm the plat early. Skipping that step is the most common way a fence job goes sideways. Permitting runs through the city, and any fence at or near six feet or tied to a retaining wall should be checked against local requirements before order. If you’re part of a full Fence Installation in Daly City project that touches grade, that scope is worth reviewing first. We cover all of Daly City and the surrounding Peninsula, from the 94014 flats up through the 94015 hills.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Daly City
Most Daly City chain link fences take two to four working days once the property line is confirmed. Steep-slope runs and jobs with extensive demo can run five to seven days because of footing work and cure time. Call (833) 997-7759 for a real timeline on your lot.
Short residential fences sometimes don’t need a permit, but height limits, corner-clearance rules, and any fence tied to a retaining wall should be checked with the city before work starts. We walk you through what applies to your address and pull permits where required. Call (833) 997-7759 to confirm your scope.
A chain link fence in Daly City costs $3,500 – $9,000 installed, with most homes in the $4,200 – $6,800 range. Footage, gauge, coating, gates, and slope are what move the number. Call (833) 997-7759 for an exact quote; estimates are free.
No, if the scope holds. We itemize the written estimate and flag anything hidden at the walk-through, so there are no change orders for surprises. If the ground turns out to be softer than expected, we tell you before we dig, not after. Call (833) 997-7759 for upfront pricing with no surprises.
Our workmanship is backed by the 730-Day Done Right Promise; if a post settles or a gate sags, we come back and make it right. Manufacturer warranties on coated systems like Barrette flow through to you. Call (833) 997-7759 to schedule your free estimate.
Ready to Price a Chain Link Fence in Daly City?
A free on-site estimate for your chain link fence in Daly City starts with a call. Dial (833) 997-7759 and a live person answers day or night. We’ll walk your line, check the grade, and hand you a written, itemized number covering posts, gauge, gates, and haul-away, with no hidden add-ons and 0% financing for 18 months available. Estimates are free, and there’s $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.