Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Foster City, CA: What It Costs and How Long It Takes
A chain link fence in Foster City typically runs $3,500 – $9,000 for a standard residential lot, with most single-family jobs landing between $4,200 and $6,800 for 150 – 200 linear feet. A straightforward run with no surprises takes 1 – 2 days on site after a 5 – 10 day lead time for materials and, where required, the permit. The price swings mostly on height, gauge, coating and how many gates you add. Call (833) 997-7759 for a free on-site estimate and a written line-item quote.
How We Build a Chain Link Fence in Foster City, Step by Step
Every job follows the same five stages. Here’s what actually happens, and what you decide at each one.
Stage 1: Property and set-back check (day 1, roughly 2 hours). Before anyone digs, we confirm the property corners against your lot lines and check Foster City’s side and rear yard set-backs for your zoning district. In this city that step matters more than in most places, because the ground under your yard is engineered fill and the levee network sits close to many rear lot lines. You decide nothing here except the fence run we walk together.
Stage 2: Mark and call-before-you-dig (day 1 – 2). We mark the post line with string and pipe, then submit the utility location request and wait the required notice period before any digging. On a fill island with original 1960s – 1980s utility under it, hitting a private irrigation line or a legacy line nobody mapped is a real risk. You confirm the final layout and gate swing direction at this stage.
Stage 3: Post setting (day 2 – 3, roughly 4 – 6 hours). Line posts go in at 8-foot intervals, terminals and gate posts at the corners and gate jambs. In Foster City’s fill and higher water table we set posts in concrete at a deeper depth than you’d see on standard inland soil and use galvanized or coated posts rather than bare steel. You choose post spacing at the quote stage, because pulling posts tighter to 6-foot centers stiffens the fence and adds posts and cost.
Stage 4: Rails, mesh, tension and gates (day 3 – 4, 4 – 6 hours). Top rail, tension wire or tension bands, then the mesh unrolled and pulled tight. Gates get their frames and hinges hung and swing-tested. You confirm gate latches and whether you’re adding self-closing hardware.
Stage 5: Walkthrough and punch (same day). We tension-check the whole run, cut post tops, clean up and walk it with you. Any post that’s loose in the concrete, any gate that drags, gets corrected before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link is a narrow product with a few choices that actually change the price and the lifespan. Here’s the honest trade-off on each.
- Gauge: 11.5 gauge is the light residential standard and the cheapest; 9 gauge is heavier and noticeably stiffer and lasts longer in wind. On the bayfront side of the lagoons, where onshore wind never stops, 9 gauge is worth the upcharge.
- Coating: Galvanized steel is the budget option and corrodes fastest in salt air. Vinyl-coated (the green or black extruded coating) costs more upfront but holds up far better against the bay salt and looks less like a security fence. For Foster City’s damp winters, we lean toward coated.
- Height: 4-foot and 5-foot are the common residential heights; 6-foot costs more in materials and often needs a permit. Taller is not automatically better here, because wind load on a 6-foot run is higher.
- Fittings and post caps: Stamped steel fittings are the default. Cast or coated fittings and weather-resistant caps add a few hundred dollars and slow corrosion at the joints, which is where rust starts.
- Gates: A walk gate is standard; a drive gate is a real cost jump because the frame and posts have to carry far more load. Self-closing and self-latching hardware matters if you have a pool or pets.
- Top rail vs tension wire: A full top rail gives the fence a cleaner edge; tension wire alone is cheaper and fine for a simple boundary run.
Brands come up mostly on gate hardware and coatings. Barrette and ViewLux come into play on gate and access fittings and the more weather-resistant configurations, and we’ll tell you at the quote which parts affect lifespan most.
What Chain Link Fence Costs in Foster City, CA
Plan on $3,500 – $9,000 for a typical residential chain link fence in Foster City. Most jobs sit in the low-to-mid part of that range. Here’s how the line items break out.
| Line item | Typical range |
|---|---|
| Standard 4 – 5 ft galvanized run, no gate | $3,500 – $5,500 |
| Vinyl-coated or 9 gauge upgrade | $4,500 – $7,500 |
| 6 ft height with permit | $5,500 – $9,000 |
| Walk gate (installed) | $350 – $900 |
| Drive gate (installed) | $900 – $2,200 |
| Old fence removal and haul-away | $250 – $700 |
Four things push a job toward the top of that range: total linear feet and how many corners the run makes, height and gauge, gate count, and whether the old fence has to come out and be hauled away. Permit scope is the fifth, but it’s a modest line item rather than a big swing.
A written estimate from us lists posts, mesh, rails, fittings, gates, hardware, concrete, labor and permit cost as separate lines, plus removal and disposal if you need it. What it won’t cover without a separate line: fence paint or privacy slats, landscaping repair around the posts, or fixing an underground utility line that isn’t on record. Those get flagged in writing so there’s no surprise later, and your quote number is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Foster City Homes Specifically Do to This Job
Almost every home here was built during the 1960s – 1980s master-planned build-out, on slab-on-grade foundations over imported fill. That building history changes chain link fence work in ways a standard suburban checklist misses.
Set your posts on engineered fill with a high water table and the rules tighten. Posts need deeper concrete embedment, and we allow for settling that a standard install on inland soil doesn’t. The bayfront wind is the second factor. Fences on the lagoon side and near the levee edges take onshore wind year-round, and combined with salt-laden air that means bare galvanized fittings rust early and tension sags. Coated mesh and weather-resistant fittings last noticeably longer here. Winter king-tide flooding near the low-lying edges of the city is worth accounting for: a fence set right on a low boundary needs its hardware raised and its fittings chosen for damp, not just dry, conditions. If your rear lot line sits within the bayfront flood-plain review area, the fence itself usually doesn’t trigger it, but we check before we recommend a layout.
Homes in the 94404 tracts also tend to have mature landscaping and legacy irrigation near the property line, so we call for a utility locate every time. Homeowners often pair this with Concrete Driveways & Concrete Work in Foster City to reset the gate approach, and it can be part of a full Fence Installation in Foster City plan if you’re replacing more than one boundary. For the wider scope, see our Fence Installation service, and our Foster City page covers the rest of what we do around here.
Serving Foster City, CA – Our Local Coverage Area
We serve Foster City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Foster City
A standard residential run goes up in 1 – 2 days on site once materials and any permit are in hand. The full timeline runs about 5 – 10 days including the utility locate and lead time, and longer if the fence is a 6-foot height that needs a permit. Call (833) 997-7759 for an exact schedule.
Often, yes, depending on height and where the fence sits relative to your property lines and the bayfront flood-plain area. We confirm the requirement for your lot and pull it if needed. Call (833) 997-7759 and we’ll tell you what your address requires.
Usually, yes. Hand-digging or careful power-augering at each post, after a utility locate, keeps the fence clear of legacy lines and roots in most yards. Occasionally a post lands right where a line runs and we flag it before digging. Call (833) 997-7759 to walk the layout.
Expect $3,500 – $9,000 for a typical residential run, with gates and height being the main adders. Removal and disposal, if you need it, adds $250 – $700. Call (833) 997-7759 for a written line-item quote; estimates are free.
The workmanship is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Materials also carry their own manufacturer warranties, which we’ll spell out in writing. Call (833) 997-7759 to schedule an estimate.
Get a Free Chain Link Fence Estimate in Foster City
Call (833) 997-7759 for a free on-site estimate on your chain link fence in Foster City. You’ll walk the run with us, we’ll check set-backs and call for the utility locate, and you’ll get a written line-item quote with the number you pay. Homeowners often pair the fence with Asphalt Driveways & Resurfacing in Foster City. Estimates are free, and a live person answers around the clock.
Written by the team at Groundwork Construction Co.