Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Richmond’s fog belt and its wartime housing stock make custom and geometric windows a different job here than in San Pablo or El Cerrito. Custom & Geometric Windows in Richmond, CA involve building or fitting non-rectangular units – arches, half-rounds, trapezoids, circles, angled bays – into walls that were never framed for them, and the work typically runs four to eight weeks from template to final trim. Budget $6,500 to $22,000 for most whole-house packages, or $1,200 to $4,500 per unique unit. Call (833) 997-7759 to set up a free on-site estimate.
The short answer on Custom & Geometric Windows in Richmond
Non-standard window shapes cost more than standard replacements because every unit is templated, built to order, and reframed to receive it. In Richmond’s older stucco and wood-frame homes, add careful staging for pier-and-post foundations and seismic permitting. Expect four to eight weeks from first measure to final caulk, with two to three weeks of that being fabrication lead time. Per-unit pricing lands between $1,200 and $4,500 depending on size and glazing, and a full house package runs $6,500 to $22,000. Calls are answered by a live person, 24/7, and estimates are free.
How we run a geometric window job, stage by stage
Stage 1 – Site measure and shape assessment (1 to 2 hours). We photograph the opening, map the wall assembly, and confirm the rough opening is square enough to receive the new frame. On arched or circular units the critical number is the radius and the spring line height, and on Richmond’s wartime bungalows that measurement often reveals a wall that has settled. You decide at this stage whether you’re matching an existing shape or reading a new one off the room. If the surrounding scope is bigger than window work, we plan it as part of a full Windows & Doors in Richmond project.
Stage 2 – Templating (half day, done after any structural reframing). A physical template or a digital laser map of the opening goes to the fabricator. Geometric units cannot be ordered from a catalog; the template is the order. You approve the final radius, mullion layout, and glazing choice here, because after this point changes mean a new unit and a new lead time.
Stage 3 – Fabrication (2 to 3 weeks typical). This is the waiting period most homeowners underestimate. Custom arched and half-round units from a shop like ECO Window Systems or ViewLux are built to the template, and anything with true divided lites or unusual glazing adds a few days. We use the time to pull the permit and stage the reframing material.
Stage 4 – Demo, reframe, and set (3 to 5 days for a typical package). Old units come out, the rough opening gets squared and reframed with proper headers where the shape requires it, flashing and weather barrier go in, and the new unit is shimmed, plumbed, and fastened. This is the day the fog matters – we do not set glass or finish exterior sealant on a wet wall.
Stage 5 – Trim, glass, and inspection (1 to 2 days plus the inspection window). Interior casing, sill work, and exterior trim close in the opening. The work is finished, insulated, and flashed, then inspected. You get a walkthrough with the final line-item invoice and the written guarantee at the close.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make on a geometric window
- Frame material. Vinyl is the value pick and holds up well in Richmond’s salt air, though shaped vinyl units have size limits. Wood and wood-clad frames allow sharper tight radii and paintable trim, at roughly 30 to 50 percent more per unit. Aluminum is the choice for large spans and clean modern profiles.
- Glazing and shape limits. Low-E and tempered glass are standard on large or low units by code. Tight radius half-rounds and true circles need laminated or tempered glass, which adds cost.
- Factory mulling versus field assembly. A factory-mulled arched unit with sidelites reads cleaner and holds its seal better; field assembly is cheaper but leaves more seams for our wet winters to test.
- Trim and finish. Interior casing and exterior trim styles are your call, and the choice drives the finish labor more than the glass does.
- Hardware and screens. Fixed geometric units skip them. Operable shapes – casement tops, transoms – need specialty operators and screens priced separately.
What Custom & Geometric Windows costs in Richmond, CA
Most homeowners here land between $6,500 and $22,000 for a package, or $1,200 to $4,500 per unique unit.
| Line item | Typical range |
|---|---|
| Single custom shape (arch, round, trapezoid) | $1,200 – $4,500 |
| Geometric package, whole house (3-6 shapes) | $6,500 – $22,000 |
| Structural reframing per opening | $400 – $1,800 |
| Permit and inspection fees | $250 – $900 |
| Interior trim and finish work | $300 – $1,200 per opening |
Five variables push a job to the high end: the shape itself (a true circle is harder to build than an eyebrow arch), whether the wall needs structural reframing, the glazing grade, the finish detail on trim, and the permit scope if you’re touching more than one opening. Written estimates include the template, fabrication, install, flashing, trim, and permit; they do not include structural engineering stamps or stucco repair beyond the immediate surround, which are quoted separately if needed.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond homes do to this job
Richmond is a former WWII shipyard boomtown, and its windows carry that history. We work on rows of wartime duplexes and bungalows in ZIPs like 94801 and 94804, and their original openings are frequently out of square and framed in old-growth lumber that has taken on its own shape. The pier-and-post foundations common here mean a reframe may need a closer look at load paths, and the seismic rules that came out of that era govern how we brace the wall when we widen an opening. The foggy marine air and salt-laden wind rustle exterior screws and trim, so we spec corrosion-resistant fasteners and finish every window on the inland side of the weather to control the moisture that seeps in at poorly flashed arch tops. Smaller homes near the waterfront and in El Sobrante, San Pablo, and Albany see the same conditions, which is why our Richmond service area crew specs each job the same way.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Richmond
Plan on four to eight weeks from start to finish, with most of that being fabrication lead time of two to three weeks. The on-site work is typically a week or less per package. Call (833) 997-7759 for an exact timeline once we’ve measured.
Yes – any new opening, enlargement, or structural reframe needs a permit, and Richmond’s permitting process includes seismic review when the wall is altered. Straight swap-in replacements of the same size usually don’t. We pull the permit and schedule the inspection as part of the job.
Often, yes. If the shape fits the existing opening and doesn’t cross a stud, water line, or outlet run, there’s no plumbing or electrical work. We map those during the site measure. When the shape forces a wall change, we price the move in the written estimate before we start.
Budget $1,200 to $4,500 per unit, or $6,500 to $22,000 for a full package. The shape, glazing, and any structural reframing move the number. Call (833) 997-7759 for a line-item quote – the estimate is free.
The work is backed by the 730-Day Done Right Promise – if it isn’t done right, we make it right – plus the manufacturer’s own warranty on the window unit itself. Ask about the written terms when we quote.
Get a free estimate on Custom & Geometric Windows in Richmond
Call (833) 997-7759 to schedule a free on-site estimate for Custom & Geometric Windows in Richmond, CA. We’ll measure each opening, walk you through the shape and glazing options, and leave you with a written line-item quote and a clear timeline – no change orders, no surprises. If you’re also considering windows as part of a wider remodel, our Windows & Doors service and Concrete Driveways & Concrete Work in Richmond and Asphalt Driveways & Resurfacing in Richmond work can be priced in the same visit.
Written by the team at Groundwork Construction Co.