Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Albany, CA: What It Actually Takes
Most driveway replacements in Albany run $5,000 – $14,000 for a standard single-car apron and two-car-wide drive, and the work takes three to five working days from tear-out to the first drive on new surface. Repair jobs, from root-lifted slabs to settled apron corners, usually land far below that and can often be handled in one to two days. Call (833) 997-7759 and we’ll walk your drive before we quote a number.
How we take a driveway from broken to drivable
Driveway work here isn’t mysterious, but the sequence matters. Skip a stage and the new surface fails in two winters. Here’s exactly what our technicians do, stage by stage.
Stage 1: Site walk and measurements (day 1, 45 – 90 minutes). We measure the full footprint, check the grade away from the foundation, and probe the base under any cracked or heaved sections. On Albany‘s older drives we’re usually looking for a failed sub-base or tree roots that lifted a slab, not just a cosmetic crack. You decide at this point whether the goal is a targeted repair or a full replacement, and where the new drive drains to.
Stage 2: Tear-out and haul-off (day 1 – 2, six to ten hours). The old concrete, asphalt, or failing pavers come out, down to the base. On a full replacement we remove every layer so we can see what the sub-base is doing; a thin overlay over failed base is money thrown away. Haul-off is included. You’ll want your cars off the drive and out of the garage by this point.
Stage 3: Base prep and grading (day 2 – 3, four to six hours). We re-grade for a positive slope away from the house and garage, compact the aggregate base in lifts, and set the formwork for the new drive. This is where a lot of cheap jobs fail: an under-compacted base is why concrete cracks two years later. It’s also the stage where a permit inspection (if one is required) typically happens – we handle the call.
Stage 4: Pour or lay (day 3 – 4, three to six hours). For concrete we pour, screed, and finish the surface – broom finish is standard for traction on a wet East Bay winter morning. For pavers or asphalt the process differs, and you choose the material before this stage, not during it. Expansion joints and control joints get cut the same day.
Stage 5: Cure and drive (day 4 – 5 plus cure time). Concrete gets a minimum of 48 – 72 hours before foot traffic and seven days before a car goes on it. Asphalt is drivable within 24 – 48 hours. We walk you through the final surface, hand over the warranty paperwork, and the drive gets its first real test that first rainy week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Standard concrete. The default for Albany drives because it suits the bungalow stock and the price band is predictable – roughly $4,500 – $12,000 for a full drive. It’s durable and easy to repair slab by slab later. The trade-off is that concrete cracks; we cut joints to steer the cracks where we want them.
- Pavers. Best for a sloped Albany lot where drainage is finicky, or when you want a surface you can pull up and reset if a slab ever settles. Runs higher, $7,000 – $18,000, but a single failed paver is a one-hour repair, not a jackhammer job.
- Asphalt. The cheapest full-surface option at $3,500 – $9,000, and it wears faster than concrete in a wet-winter climate. Best when the budget is tight or the drive is a secondary surface.
- Targeted slab repair. If only one or two panels are cracked, mudjacking or a full panel replacement is often all you need. That’s a repair-day job, not a reconstruction.
- Sealing. A $250 – $700 add-on that extends the life of asphalt or pavers and makes the surface easier to keep clean. We don’t sell it as a fix for structural cracks – it isn’t one.
What Driveway Repair & Replacement costs in Albany, CA
A full driveway replacement in Albany sits at $5,000 – $14,000. Concrete runs $4,500 – $12,000, asphalt paving $3,500 – $9,000, and pavers $7,000 – $18,000. A simple reseal is $250 – $700. Those ranges hold unless one of the variables below pushes you to the top or keeps you at the bottom.
The four things that move the number: size, because a drive wide enough for two cars and a single-car apron are thousands of dollars apart; existing condition, since a failed sub-base adds base removal and aggregate that a surface-only job doesn’t; material grade, where pavers or an upgraded finish run well past standard concrete; and permit scope, because a replacement in the public right-of-way on some Albany streets needs a city permit and inspection, which carries a fee and a scheduling requirement.
A written estimate from us is line-item: tear-out, haul-off, base prep, material, finish, permit handling if needed. It excludes the one thing nobody can quote until tear-out – an underground surprise like a root mass or a buried utility liner. We flag that risk before we start, not after, because we don’t do change-order surprises. From foundation to finish line, the number we quote is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Albany’s narrow lots and old bungalows do to a driveway job
Albany’s housing stock is the whole story here. Almost every home in this city dates to 1920 – 1950 – wood-frame bungalows, Mediterranean-revival stucco cottages, small ranches with detached garages – and the driveways that served them were laid with what passed for concrete in that era. On a fog-cooled East Bay block, that older slab has been through seven decades of wet winters, so the failures we see are base-related, not cosmetic: heaving where a slab meets the sidewalk, cracking that tracks a tree root, and aprons that settled because the original base was never compacted for modern standards. The drive is usually tight on a narrow lot too, which means tear-out and pours get done in a single-lane staging pattern to keep your neighbor’s access clear.
Permitting here runs through the small Albany city hall counter, not a big county department, and on a narrow lot the right-of-way work may need a city permit before a form goes down. If the driveway scope is part of a larger plan, our Driveway & Pavers in Albany page covers how the wider project fits together, and if you’re adding living space at the same time, homeowners often pair this with ADU Site Prep & Utilities in Albany to line the utility trenching up with the drive work. We handle the whole Albany area, and our Driveway & Pavers service covers the full range of surface options.
Serving Albany, CA – Our Local Coverage Area
We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Driveway Repair & Replacement in Albany
A standard full replacement takes three to five working days, with concrete needing another seven days to cure before a car goes on it. Small repairs can be done in a single visit. Call (833) 997-7759 for an exact timeline based on your drive’s size.
Sometimes – replacement work that touches the public right-of-way or apron typically needs a city permit and inspection, while a drive fully inside your property line often doesn’t. We check at the Albany counter for your specific address and pull what’s required. Call (833) 997-7759 and we’ll confirm before you commit to anything.
Yes, in most cases. Surface crack repair, slab replacement, and resealing stay above the base and never touch plumbing or structure. Only a full tear-out that uncovers a buried utility line or an undermined foundation edge pulls in extra scope, and we price that clearly. Estimates are free – call (833) 997-7759.
Targeted repair runs a fraction of replacement, which lands at $5,000 – $14,000 for a full new drive. If one or two slabs are cracked and the base is sound, repair is the right spend; if the base has failed across the footprint, replacement saves you from repeating the job. Call (833) 997-7759 for an honest read on which side you’re on.
Every driveway we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, and that’s written into your contract, not a verbal promise. Materials carry their own manufacturer warranties on top. Call (833) 997-7759 to schedule your free estimate.
Ready to get a real number on your Albany driveway?
Call (833) 997-7759 to book a free, on-site estimate for driveway repair or replacement in Albany. We’ll walk the surface with you, talk through the right material for your lot and budget, and hand you a written line-item quote – upfront pricing, no surprises. Our technicians have up to 12 years of experience, every project backs the 730-Day Done Right Promise, and a live person answers the phone around the clock. From foundation to finish line, we handle it.
Written by the team at Groundwork Construction Co.