Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Richmond, CA: What It Costs and How Long It Takes
Driveway repair and replacement in Richmond typically runs $5,000 – $14,000 for a full replacement, less for targeted repairs, and most residential driveways are finished in 3 to 7 working days once we start. The number moves with length, slope, base condition and what’s underneath. You don’t need a sales pitch to get to a real figure – call (833) 997-7759 and we’ll walk your driveway and put a written, line-item number in your hands.
How the job actually runs, start to finish
Every driveway is different, but the sequence for a repair or replacement in Richmond looks like this, and we’ll tell you up front which stages apply to yours.
- Stage 1 – On-site evaluation (day 0). We measure the driveway, check the slope toward the garage and street, probe the base, and note cracking, settling, and where water has been pooling. You decide whether you want to repair the failing sections or replace the whole run.
- Stage 2 – Demo and haul-off (day 1-2). Existing concrete or asphalt comes out, along with any failed sub-base. On older Richmond properties that base is often thin or mixed, and we’ll show you what we find before we build it back.
- Stage 3 – Base prep and grading (day 2-3). Compacted aggregate base goes down, graded so water runs off the driveway and away from the foundation. This is the stage nobody sees and the one that decides whether the surface lasts.
- Stage 4 – Surface install (day 3-5). Concrete gets formed and poured; pavers get set on a screeded bed; asphalt is laid and compacted. You’ll have already chosen the material and finish at Stage 1.
- Stage 5 – Cure, cleanup and final walkthrough (day 5-7). Concrete needs curing before you drive on it, and we don’t hand it back until we’ve walked it with you against the written scope.
Nothing about that timeline is padded. On a driveway this simple, the schedule is mostly governed by weather and concrete cure time, not crew availability.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
The surface material is the biggest lever on both look and cost, but the base and detailing matter just as much.
- Concrete – the most common choice around Richmond and the easiest to match to existing paving. A full concrete driveway replacement typically lands in the $4,500 – $12,000 range depending on length and thickness. Trade-off: it cracks if the base isn’t right, so don’t skip Stage 3.
- Asphalt – usually the lowest installed cost at $3,500 – $9,000 for a typical residential run. Trade-off: needs resealing every few years and softens in summer heat; it won’t last as long as concrete without maintenance.
- Pavers – the premium look, installed in the $7,000 – $18,000 range for a driveway. Trade-off: higher initial price, but individual units can be lifted and reset instead of tearing out a whole slab.
- Sealing and joint repair – on a sound driveway this is the cheapest money you’ll spend, at roughly $250 – $700. It buys you years before a full replacement is needed.
- Drainage and slope work – a swale, channel drain or re-grading toward the street. Skipping it on a sloped Richmond lot is how driveways flood garages.
What Driveway Repair & Replacement costs in Richmond, CA
Most driveway repair and replacement projects in Richmond fall between $5,000 and $14,000, with the exact figure set by five variables:
- Length and width – a single-car run versus a double-wide driveway changes the square footage and the price by thousands.
- Existing condition – a few cracked panels can be cut out and replaced; widespread settling or a failed base means full demo and rebuild.
- Base and grade work – steep lots, poor soil and drainage corrections add cost because they add excavation and materials.
- Material grade – standard concrete versus pavers versus asphalt, and decorative finishes that carry a premium.
- Permits and access – some work touching the public right-of-way needs a permit and inspection, and tight access can mean hand-carrying material.
A written estimate from us lists demo, haul-off, base, material and finish line by line, so you can see exactly what you’re paying for. What it won’t hide is the “surprise” line some bids leave out – things like unexpected base removal or drainage corrections. If we find something after we start, you hear about it before we do the work, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond homes specifically do to this job
Richmond is a former WWII shipyard boomtown, and a lot of the housing stock reflects it – rows of small stucco and wood-frame homes and wartime duplexes built between the 1910s and 1950s, especially in the 94801 and 94804 ZIPs. That matters for driveways because these properties were often paved cheaply decades ago, base included, and have been patched over ever since. We see a lot of shallow base, settled slabs, and drainage that dumps water toward a garage that was never built for it.
The marine climate does its part too. Salt-laden air off the bay corrodes exterior fasteners and metal edging faster here than inland, and the foggy, wet winters expose any poorly graded driveway to standing water and freeze-thaw cracking. If your project touches the public sidewalk or right-of-way, expect the city to want a permit and an inspection, and we pull those and get them signed off. On the duplexes near the old shipyards, shared service lines mean we check what’s buried under a driveway before anyone digs.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Driveway Repair & Replacement in Richmond
Most residential driveways take 3 to 7 working days from demo to final walkthrough, with concrete cure time adding a few days before you can park on it. Rain in the winter months can push the schedule, so we build a weather buffer into the plan. Call (833) 997-7759 for a timeline specific to your property.
You need a permit when the work touches the public right-of-way or requires a curb cut or sidewalk modification, and sometimes for major grading. Simple like-for-like replacement entirely on your own property often doesn’t. We handle the permit application and inspection when one is required, so it isn’t your errand.
Yes, when the damage is isolated – a few cracked panels, a settled section, or failed joints can often be cut out and replaced without touching the rest. If the base has failed across the run, a patch is money thrown at a bigger problem, and we’ll tell you that straight. An on-site look settles it.
Full replacement typically runs $5,000 – $14,000, while targeted repairs and resealing start much lower, around $250 – $700 for sealing. The price depends on length, material, base condition and any drainage or permit work. Call (833) 997-7759 for an exact quote – estimates are free.
Every driveway project is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a free on-site estimate for your Richmond driveway
We’ll come out, measure the driveway, check the base and give you a written, line-item estimate – no pressure and no surprises. Call (833) 997-7759 and a live person answers, day or night, and sets up a visit. If your driveway is one piece of a bigger plan, we can talk through that too, along with our Driveway & Pavers service and the rest of the Driveway & Pavers in Richmond scope. We cover all of Richmond, and homeowners often pair this with Junior ADU & Interior Conversion in Richmond or ADU Site Prep & Utilities in Richmond.
Written by the team at Groundwork Construction Co.