Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in South San Francisco, CA: What It Takes and What It Costs
Driveway repair and replacement in South San Francisco usually runs $5,900 to $16,520 for a full replacement, with most single-car driveways coming in around $7,500 to $10,500 once demo, base, and a finished surface are included. A driveway replacement takes three to five working days from demolition to cure. Call (833) 997-7759 for a free on-site estimate before you commit to anything.
How a driveway replacement actually runs, day by day
Most contractors tell you they “handle everything.” That tells you nothing about what your week looks like. Here’s the honest sequence we follow on a South San Francisco driveway, with what you decide and when.
- Day 1: site check and demolition. We walk the driveway and probe the existing base, then break out the old surface with a jackhammer and haul it off. A typical two-car driveway in South San Francisco runs 400 to 600 square feet and produces four to six dumpster loads of concrete. You decide here whether any tree roots need to be cut and where the debris lands on the street (permit for a temporary no-parking zone if needed).
- Day 1 into Day 2: subgrade and base work. After demo we grade the subgrade, compact it, and lay 4 to 6 inches of Class 2 aggregate base, compacted in two lifts. If the old base is soft or the yard drains toward the house, we may add a French drain or a channel drain at the garage apron. You choose whether to correct years of ponding now or leave it. Correcting it now is far cheaper.
- Day 2 or 3: forming and reinforcement. We set forms to the correct slope (a 1 to 2 percent fall away from the garage is the goal), tie in #3 or #4 rebar on 16- to 24-inch centers, and install the control joints that keep future cracks in straight lines. You confirm grade and joint layout before we pour.
- Day 3 or 4: the pour. Concrete arrives, gets placed, screeded, floated, and finished to the texture you picked (broom, exposed aggregate, or a stamped pattern). Asphalt, if you choose it, gets laid at 2 to 3 inches compacted and rolled the same day.
- Day 4 into the following week: curing and cure time. Concrete needs 24 to 48 hours before foot traffic, seven days before you park on it, and 28 days to reach full strength. Asphalt needs 48 to 72 hours before a car goes back on, and it takes a full season to fully cure. You plan around it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between before we break ground
Every driveway decision trades cost against lifespan against looks. Here’s where the real choices sit.
- Concrete, standard 4-inch pour – runs about $5,310 to $14,160 depending on size and thickness. Holds up well in South San Francisco’s cool, damp climate. Cracks are the main failure mode over time, so joint placement matters.
- Concrete, reinforced 5- to 6-inch pour – the same range at the high end. Better choice if you park heavier vehicles or if the base is marginal. Worth the extra few hundred dollars.
- Pavers – $8,260 to $21,240. The most repairable option because individual units lift and reset without tearing up the whole surface. Best fit on older flatland homes where you may need access to underground utilities again.
- Asphalt – $4,130 to $10,620. Cheapest up front, smooth and quiet, but needs sealing every two to three years and cracks faster in sun. A strong option if budget is the deciding factor.
- Exposed aggregate or stamped concrete – adds a finish cost on top of the concrete pour. Great looks, but harder to patch invisibly later.
Whatever surface you pick, the base and drainage do more to determine how long it lasts than the surface material. We won’t sell you the upgrade if your real problem is a soft subgrade.
What driveway repair and replacement costs in South San Francisco, CA
A full replacement lands between $5,900 and $16,520 for most residential driveways here. Sealing an existing driveway is a separate, much smaller job at $295 to $825. Between those two, five things move the number:
- Square footage and shape. A straight 400-square-foot driveway sits at the low end. Curves, flares, and cut-ins around planters or a utility meter add forming labor fast.
- Existing condition. Thick old concrete, rebar, or a failed base that has to be dug out and re-compacted all add removal and disposal cost. Old oil-stained asphalt sometimes hides a base problem that only shows up after demo.
- Drainage corrections. Adding a channel drain, French drain, or re-grading toward the street usually adds a few hundred to well over a thousand dollars depending on length.
- Material grade. Standard concrete versus decorative finishes, and asphalt versus pavers, cover the widest spread in the range.
- Permits and access. South San Francisco requires a permit for most driveway replacements connected to the public right-of-way, and a temporary no-parking permit for dumpsters and material staging on a tight street. That’s real money and paperwork.
A written estimate from us lists demo, haul-off, base prep, reinforcement, the surface itself, joints, and cleanup as separate line items. It does not include landscaping repair, fence reset, or replacing a gate post unless we quote it up front. Upfront pricing, no surprises – the number on the estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat South San Francisco homes specifically do to this job
South San Francisco is not a typical bedroom community. It’s the “Industrial City” – home to a dense cluster of biotech manufacturing, logistics, and life-science operations – so a lot of the construction traffic here runs toward commercial tenant improvements and cleanroom build-outs. That matters for residential driveways in a practical way: contractors in this city are used to code-heavy work and careful inspection schedules, and the same discipline applies when we pull a driveway permit for a house on the flatlands west of Highway 101.
The weather shapes the work here in a way it doesn’t a few miles south. South San Francisco sits in the fog belt just south of San Francisco, with cool, damp summers and steady onshore wind. Concrete cures slower in these conditions, so we plan for cure times that a Sun Belt contractor would laugh at, and we’re careful about the slope away from the garage so wind-driven rain doesn’t run back under the door.
Much of the older housing stock on the flatlands dates to the pre-war and mid-century era, which means you’ll find the occasional unpermitted addition, old utilities running shallow under a driveway, or a slab that was poured too thin decades ago. On infill townhomes along the El Camino Real and the Caltrain corridor, driveways are often tight, shared, or loading-alley access only, and that changes the equipment we bring in. We cover South San Francisco from the flatlands out to the hillside lots off the El Camino, and we’ve seen all of these conditions in ZIP codes 94080 and 94083.
If the driveway job is part of a full Driveway & Pavers in South San Francisco scope – new driveway plus walkway and patio – we bid it as one project. Homeowners often pair a driveway job with Junior ADU & Interior Conversion in South San Francisco or ADU Site Prep & Utilities in South San Francisco when they’re adding a unit and need a proper approach and utility runs. Our Driveway & Pavers service covers the wider scope if you’re still pricing options.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – driveway repair and replacement in South San Francisco
Three to five working days from demolition to a finished, cured surface, plus seven days before you drive on concrete. Concrete pours take 24 to 48 hours to set up and 28 days to reach full strength. Asphalt goes back in service in 48 to 72 hours. Call (833) 997-7759 to schedule a walk-through and get an exact timeline.
Yes, in most cases. South San Francisco requires a permit when a driveway connects to the public right-of-way, and you’ll also need a temporary no-parking permit if a dumpster or materials stage on the street. We handle the permit pulls and coordinate the inspection so you don’t have to. Call (833) 997-7759 and we’ll tell you exactly what your address needs.
Usually yes. We can work within the existing footprint and protect adjacent plantings, but a perimeter fence post that sits on the driveway slab will have to be cut and reset, and that’s a separate line item. If you want new plantings or a fence added at the same time, that gets quoted up front. Call (833) 997-7759 to talk through the layout.
Full replacement runs $5,900 to $16,520, and sealing an existing surface is $295 to $825. Size, existing condition, drainage corrections, material choice, and permit scope drive the final number. Call (833) 997-7759 for an exact quote – estimates are free.
All our driveway work is covered by the 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and make it right. Call (833) 997-7759 to learn what the guarantee covers.
Ready for a free on-site driveway estimate in South San Francisco?
Every driveway job starts with a free on-site estimate at your South San Francisco property. We measure, probe the existing base, and talk through concrete, pavers, or asphalt with real line-item pricing before you sign anything. Call (833) 997-7759 and we’ll schedule the visit. If you’re also planning new windows or a front door to complete the curb, ask about our Therma-Tru and ViewLux options while we’re there.
Written by the team at Groundwork Construction Co.