Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Burlingame: What You’re Actually Buying
Impact windows and doors in Burlingame typically run $8,000 to $25,000 for a full-home package, and most single-family installs take 2 to 4 days once materials land on site. You’re buying laminated or tempered glass in a reinforced frame, tested to hold against wind-borne debris and forced entry. For the older custom homes here, the real work is matching profiles and trim so the protection doesn’t announce itself. Call (833) 997-7759 to schedule a free on-site estimate.
How Our Burlingame Impact Window & Door Install Runs, Stage by Stage
Impact work on premium homes is a carpentry job as much as a glazing job. Here’s the sequence we follow, and what you decide at each point.
- Day 1 – walkthrough and field measurements. We measure every opening, check the wall assembly (stucco, wood siding, or brick veneer), and photograph existing trim profiles on the Easton Addition and Burlingame Park homes where original detailing is still in place. You decide which openings get impact glass now and which can wait for a later phase. Roughly 2 to 3 hours.
Weeks 2 to 5 – ordering and design review. Impact units aren’t stock items. Lead times run 4 to 8 weeks depending on brand and finish. If your home sits in a design-review overlay, this is when paperwork gets filed. You sign off on glass package, frame color, grille pattern, and hardware.
Day 1 on site – protection and demo. Floors get covered, furniture moves, and old sashes and doors come out. On pre-1940 homes we open the wall carefully because previous remodel layers are common. If we find rotted framing or missing flashing, you get a written change order before anything else happens. One to two days for a typical 8 to 12 opening job.
Days 2 to 3 – setting and sealing. New units go in square and plumb, shimmed for drainage, flashed at the head and sill, and sealed in two stages. We use low-expansion foam at the perimeter and a continuous sealant bead outside. You decide whether to keep original interior casings or go with new trim. Two to three days.
Final day – hardware, adjustment, and inspection. Locksets, multi-point door hardware, and screens go on. We cycle every unit to confirm smooth operation. If your project pulls a permit, the inspection happens here. We walk the job with you and hand over the signed warranty paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Impact Windows & Doors
Most of the decision comes down to four things. Here’s the honest read on each.
- Glass package. Laminated glass with a PVB or SGP interlayer holds together under impact. SGP costs more but stays rigid and clearer; PVB is the workhorse and fine for most homes. Low-E coatings help with heat gain but slightly reduce visible light.
- Frame material. Vinyl is the budget option and performs well but limits color choices. Aluminum is slimmer and holds large panes, but conducts heat unless thermally broken. Wood-clad frames (Therma-Tru makes a strong door line) match historic homes best, at a premium of 20 to 40 percent over vinyl.
- Door style. Entry doors come in fiberglass, steel, or wood. Fiberglass resists dents and moisture and is the practical pick for coastal damp. Wood gives you the carriage-house look that fits Burlingame’s older stock, but needs refinishing every few years.
- Hardware and finish. Multi-point locking, finish color, and handle style. This is where a custom home’s character lives, and where cheap hardware shows its age fastest.
If you’re pairing this with a wider exterior refresh, our Windows & Doors service handles the full scope, and homeowners often pair this with Aluminum Fence in Burlingame for a finished yard line.
What Impact Windows & Doors Cost in Burlingame, CA
Impact window installation in Burlingame runs $8,000 to $25,000 for a whole-home package. A single entry door with impact glass typically falls inside that range too, depending on frame and hardware.
Four variables drive where your number lands:
- Opening count and size. Each standard window runs roughly $800 to $1,500 installed. Oversized or custom-shaped openings push past that.
- Existing wall condition. Homes with original 1920s framing often need sill repair or new flashing, adding $300 to $1,200 per opening.
- Frame and glass grade. Wood-clad and SGP glass sit at the top of the range; vinyl sits at the bottom.
- Permit scope. A like-for-like swap may not need a permit; a size change or new opening does, and that adds inspection time and fees.
Your written estimate line-items each opening, frame finish, glass package, and hardware. It includes removal and disposal, flashing, sealant, and trim. It does not include structural framing repair or drywall patching beyond the opening – those show up as separate lines only if we find them once the wall is open.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to This Job
Burlingame is one of the oldest architecturally protected suburbs on the Peninsula, and the work here is mostly high-end remodel on century-old stock, not new build. In Easton Addition and Burlingame Park, we routinely find two or three remodel layers stacked on the original framing when we pull a sash. That means an impact window swap can turn into a flashing and furring rebuild before the new unit goes in. The damp winters and persistent morning fog off the coastal hills make exterior sealing and weatherproofing non-negotiable on wood-sided and stucco homes. And where a project touches second-story work or a facade change, the design-review process adds weeks, not days. Our Burlingame coverage includes the full Peninsula corridor.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Burlingame
Most whole-home installs take 2 to 4 days on site, plus 4 to 8 weeks for materials to arrive. Custom shapes and wood-clad frames sit at the longer end. Call (833) 997-7759 for a timeline tied to your home.
Like-for-like replacements usually don’t require a permit; a size change, new opening, or structural modification does. If your home falls in a design-review area, additional review applies. We handle the paperwork. Call (833) 997-7759 to confirm your address.
Yes, when the existing opening is sound. On pre-1940 Burlingame homes, we may find rotted sills or missing flashing once the old unit comes out – that’s when a change order gets written before any extra work starts. Call (833) 997-7759 for an on-site assessment.
Whole-home packages run $8,000 to $25,000, with a single standard window around $800 to $1,500 installed. Frame material, glass grade, and existing wall condition move the number. Call (833) 997-7759 for an exact quote – estimates are free.
Every install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Product warranties pass through from the manufacturer (Mr-Glass and ViewLux among them). Call (833) 997-7759 with questions before you sign anything.
Get Your Burlingame Impact Window & Door Estimate
Call (833) 997-7759 for a free on-site estimate. We measure every opening, walk the wall condition with you, and hand you a written line-item quote – no vague range, no surprises. A live person answers around the clock. Upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. If impact windows are part of a full Windows & Doors in Burlingame scope, we’ll fold it into one plan.
Written by the team at Groundwork Construction Co.