Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Daly City: What the Job Actually Involves
Impact windows and doors in Daly City typically run $8,000 – $25,000 for a full-home package, and most single-family installs take two to four days on site once materials land. The work means pulling the old units, checking and repairing the framing behind them, then setting laminated or reinforced glass in rated frames that meet California’s wildfire and wind-borne debris requirements. Call (833) 997-7759 for a free on-site estimate. We’ll measure, check the framing, and give you a written line-item price before anything gets ordered.
From First Measure to Final Inspection: How the Install Runs
Impact window and door work here follows a fixed sequence. The order matters because on Daly City’s hillside lots, what’s behind the wall often decides the schedule.
Stage 1 – Measure and open the wall (day 1, about 2 hours). We measure every opening and pull a small section of interior trim at two or three windows to see what the framing looks like. On post-war stucco homes set into graded hillside cuts, this is where we find out whether the rough opening is square or whether years of dune-soil settlement have racked it. You decide then whether to order standard sizes or go custom.
Stage 2 – Order and confirm (1 to 3 weeks). Most impact units ship in two to three weeks; custom or non-standard colors push that longer. You lock in frame color, glass package, and whether any door gets a multi-point lock. This is your last easy chance to change the spec.
Stage 3 – Demo and prep (day 1 of install, roughly 4 to 6 hours). Old sashes and frames come out. We inspect the sheathing and framing for dry-rot, which is common on fog-facing walls. Rotted studs get sistered and the opening gets squared before anything new goes in. You don’t need to decide anything here – we document what we found with photos.
Stage 4 – Set, shim, seal, and flash (days 1 through 3). New units get set level, shimmed, nailed through the flange, and sealed with flashing tape and a rated sealant. On steep streets above the Mission Street corridor, we pay extra attention to the sill pan and head flashing because wind-driven rain finds any gap. Interior trim goes back on the same visit.
Stage 5 – Inspection and walkthrough (day 3 or 4). We schedule the city inspection, walk every opening with you, and demonstrate the locks and screens. Final stucco patching happens after inspection so the inspector can see the flashing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
An impact window package is a handful of real decisions, not a catalog to leaf through. Here’s what changes the outcome and the price.
- Frame material: Vinyl is the value choice and holds up well in fog, but it’s limited on color. Fiberglass and aluminum-clad frames cost more and take paint better – a real consideration if you’re matching a 1950s stucco color. Mr-Glass and ViewLux both offer solid impact-rated lines worth comparing side by side.
- Glass package: Laminated impact glass is the baseline. Adding a low-E coating and argon fill cuts heat gain and condensation on the foggy west side – worth it on Westlake and Serramonte walls that never dry out.
- Entry and patio doors: A Therma-Tru impact entry door with a multi-point lock is heavier and more secure than a standard door, and it costs more too. Sliding patio doors in impact glass are the priciest single unit in most packages.
- Hardware and screens: Barrette impact-screen systems add cost but hold up to wind better than economy screens. Decide early – retrofitting screens later is a separate order.
- Custom sizing: Standard sizes keep costs down. Non-standard openings on hillside homes often need custom, which adds lead time and money.
What Impact Windows & Doors Costs in Daly City, CA
A full-home impact window and door package in Daly City runs $8,000 – $25,000. A partial install or a few openings sits near the low end; a whole house with impact doors and custom sizes lands near the top. Here’s what moves the number:
- Number and size of openings: Every additional unit adds cost, and oversized windows in impact glass cost more than they do in standard glass.
- Framing condition: Dry-rot repair and out-of-square rough openings on fog-facing walls add labor you can’t see until demo.
- Glass and frame grade: Low-E laminated glass and fiberglass or clad frames push toward the high end; standard vinyl and basic laminated glass stay lower.
- Doors: Impact entry and sliding doors are the biggest single line items. Each one you add raises the total.
- Permit and inspection scope: Daly City permits and inspection on a full replacement add cost. We pull the permit and pass inspection as part of the written quote.
Your written estimate lists every opening, the glass spec, the frame material, permit fees, and stucco patching. What it typically doesn’t cover: unexpected structural repair found at demo, which we quote separately before we touch it. Upfront pricing, no surprises – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City is built almost entirely on the wind-blown sand dunes and steep fog-belt slopes of San Bruno Mountain’s western flank, which makes construction here a different animal than flatter Peninsula cities. The stock is overwhelmingly post-WWII 1940s-1960s stucco-over-wood-frame tract homes and low-rise apartments packed along the Mission Street and El Camino corridors, many on poured slab foundations set into graded hillside cuts. On the steep streets above Mission Street, we routinely find original homes built on sand with minimal foundation depth – and the fog-soaked west-facing walls rot from the outside in long before homeowners notice. That persistent Pacific fog and onshore wind off the water keep Westlake and Serramonte damp year-round, driving stucco cracking and dry-rot in the framing around the very windows we’re replacing. Coastal and hillside permitting adds a step most flat-city jobs skip, and we account for active landslide mapping on the slope-side lots. The moisture intrusion we see here is a combination South San Francisco and Pacifica don’t face in the same way, which is why we inspect the framing behind every opening – not just swap glass. Homeowners often pair this upgrade with Iron Fence in Daly City to finish the street front.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Daly City
A typical Daly City impact windows & doors install finishes on site in two to four days, plus two to three weeks of material lead time before we start. Larger homes with many openings or custom sizes run toward the longer end. Call (833) 997-7759 for a firm schedule after we measure.
Yes – replacing windows and doors in Daly City requires a permit, and the work must pass inspection. We pull the permit and schedule the inspection as part of the quoted job. Call (833) 997-7759 to talk through the scope first.
In most cases, yes. We set new units into the existing rough openings, so nothing structural moves. If demo reveals rotted framing, we repair that framing – not the whole wall – and quote the extra before proceeding. Call (833) 997-7759 to have us check your openings.
Impact windows & doors in Daly City run $8,000 – $25,000 depending on how many openings, glass and frame grade, and whether you add impact doors. Estimates are free and line-itemed; call (833) 997-7759 for an exact quote.
Our workmanship is backed by the 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Call (833) 997-7759 to ask about manufacturer warranties on specific brands.
Get a Free Impact Windows & Doors Estimate in Daly City
If your Daly City home still has its 1950s windows fogging up and leaking, get a written, line-itemed estimate before you commit. We’ll measure, check the framing, and walk you through the glass and frame options so you know exactly what you’re paying for. This is part of a full Windows & Doors in Daly City scope if you want to look wider, and you can see our Windows & Doors service further. Call (833) 997-7759 to schedule your free estimate – calls are answered by a live person, 24/7 – and we’ll cover your Daly City neighborhood directly.
Written by the team at Groundwork Construction Co.