Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in San Francisco: What They Cost and How Long They Take
Most San Francisco patio and walkway projects run $4,130 to $12,980 for a finished paver surface, with most jobs landing in the middle of that band, and take 3 to 7 working days once excavation starts. Pool decks sit higher because drainage, coping and the transitions to the pool shell all add labor. The days before that, though, are where the real time goes: layout, excavation, base compaction and, on older lots, whatever the digging turns up. Call (833) 997-7759 and we’ll walk the site and put real numbers on paper.
How a San Francisco Patio, Walkway and Pool Deck Job Actually Runs
Five stages. Each one has a decision point, and the homeowner’s choices at stage two and three are what set the final price.
Stage 1: Site walk and layout (day 1, half a day)
We start by marking the footprint in paint on the ground and checking it against the property line, the house, and any stairs or gates. On tight San Francisco lots, this is where most of the arguing happens, because a walkway that reads fine on a sketch crowds a sideyard you actually use. You’ll confirm the layout in place before anyone breaks ground.
Stage 2: Demolition and excavation (days 2-3)
Existing concrete, cracked pavers and old decks come out and go into a dumpster sized for the job. We excavate to depth so the base can carry both the pavers and the weight above them, which on a pool deck means going deeper than a simple patio. If you’re keeping a mature tree in the yard, tell us now, because root zones change the excavation line.
Stage 3: Base prep, drainage and compaction (days 3-4)
Class II base goes in lifts, compacted with a plate compactor after each one. This is the stage nobody photographs and the one that decides whether the surface stays flat in five years. Drainage gets set here too: slope away from the house, channel drains at doorways, and a proper connection where the deck meets a downspout or gutter line.
Stage 4: Setting pavers, coping and edge restraint (days 4-6)
Pavers go down over a screeded sand bed, cut to the edges, and locked in with edge restraint. Pool coping needs to sit level with the shell, so that portion gets measured and dry-fitted before anything sets. If you picked a pattern with a border course, this is the slow, careful part.
Stage 5: Polymeric sand, cleanup and final walk (day 6-7)
Joint sand goes in, gets swept and activated, then the site is cleaned and you walk the job with us. Anything you flag gets fixed before we call it done. The whole surface is covered by our 730-Day Done Right Promise, so if a paver works loose or a joint opens up, we return and set it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape the Finished Surface
You’re picking between four things: the paver material, the pattern, the drainage approach, and whether you want a border or accent. Here’s the honest read on each.
- Concrete pavers carry the most traffic and hold up best to San Francisco’s damp winters. Belgard is our default here, and the trade-off is cost: more material, more labor, more base depth.
- Natural stone (bluestone, travertine, flagstone) gives a look you can’t replicate with pavers and stays cooler underfoot around a pool. It costs more per square foot and needs a more rigid base, so it isn’t a budget pick.
- Permeable pavers let water drain through the joints instead of sheeting off the surface. Smart on a lot where runoff would otherwise pour toward the house or a neighbor’s gate.
- Pattern and border is a labor decision as much as a design one. A running bond lays fast; a herringbone with a contrasting border can add a day and a half to the schedule.
- Drainage is the least visible item and often the most important. Channel drains, catch basins, and a slope plan cost real money and prevent the flooded sideyard you’d otherwise fix every February.
What Patios, Walkways & Pool Decks Cost in San Francisco, CA
A paver patio installation in San Francisco runs $4,130 to $12,980, and that range is real: the low end is a simple rectangle over a sound base, the high end is a large, patterned surface with drainage work and access problems. A walkway is usually a smaller slice of the same job. Pool decks push higher once coping and slope corrections enter the picture.
Four things move the number:
- Square footage and shape. Straight runs are cheap. Curves, radius edges and multiple levels all add cutting time.
- What’s under the surface. An intact concrete pad can be capped. A failing one gets demoed, hauled and replaced, which adds cost fast.
- Drainage and elevation. Sloped lots, poor storm drainage or a pool that needs a new edge all require more materials and more careful setting.
- Access. A narrow sideyard gate means hauling material by hand instead of with a wheelbarrow from the street. That’s a labor line, and it’s real.
Your written estimate lists the paver type, the base depth, the drainage plan, the demo and the haul-off. It does not include hidden repair work uncovered during excavation, or the cost of moving utilities if you choose to relocate a downspout or pool light. We price surprises separately and in writing. Upfront pricing, no surprises, and 0% financing for 18 months is available if you want to spread the cost out.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
The city’s building stock is the wild card. Rows of 1880s-1920s wood-frame Victorian and Edwardian homes sit shoulder-to-shoulder on narrow lots, and the exterior spaces we work in are usually the leftovers between them: a sideyard walkway, a rear patio wedged behind a kitchen, a pool deck tucked against a retaining wall. In Noe Valley and the Mission, those lots often have a soft-story garage underneath, and excavation near the foundation has to be thought through before the first shovel goes in. The Haight adds a historic-review layer that can slow a project that would be a routine permit on the Peninsula.
The climate shapes the schedule as much as the plan. Fog-cooled summers and wet winters mean exterior work lives and dies by the forecast, and constant coastal moisture attacks exposed wood, base edges and drainage lines. The fog line at Twin Peaks genuinely decides whether we pour or compact on a given week. If your project is part of a full Driveway & Pavers in San Francisco scope, we line up the exterior phases around the same dry window.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Patios, Walkways & Pool Decks in San Francisco
A typical paver patio or walkway takes 3 to 7 working days on site, with the count starting once demolition begins. The planning and permit stage before that can take longer, especially on older lots where historic review or seismic conditions come into play.
Often yes, particularly when the work involves a retaining wall, a change to drainage, or any structure attached to the pool. Interior-facing walkways and simple surface replacements sometimes fall below the threshold, but we check the specific scope with the city before we quote, so you’re not guessing.
Yes, in most cases. We design the layout around existing downspouts, pool equipment, stairs and foundation walls, and we flag any item that needs relocation before the estimate is final. If you’re also planning an ADU Site Prep & Utilities in San Francisco project, we coordinate the exterior work so utilities get handled in one pass rather than dug up twice.
Pool decks land at the upper end of the $4,130 to $12,980 paver range once coping, slope corrections and drainage are included. Exact figures depend on the pool’s shape, the shell condition and how much existing surface has to come out. Call (833) 997-7759 for a free estimate, and we’ll walk the deck with you.
Every patio, walkway and pool deck we install is covered by the 730-Day Done Right Promise: if it isn’t done right, we come back and make it right. That covers workmanship and settling issues for two full years after the final walkthrough.
Get a Real Number on Your San Francisco Patio, Walkway or Pool Deck
Call (833) 997-7759 to schedule a free on-site estimate for Patios, Walkways & Pool Decks in San Francisco. We’ll measure the space, check the base and drainage, and hand you a written line-item quote before you commit to anything. If you’re layering this into a wider exterior or renovation plan, our Driveway & Pavers service and Full Kitchen Remodeling in San Francisco teams can scope the work together. We cover San Francisco and the surrounding neighborhoods, and calls are answered by a live person around the clock.
Written by the team at Groundwork Construction Co.