Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Oakland: What It Involves and What It Costs
A tub-to-shower conversion in Oakland removes the existing tub-and-surround assembly and replaces it with a waterproofed, tiled shower base and walls, keeping the same footprint in most cases. Plan on two to four weeks from demo to final inspection, and expect to spend $3,500 – $10,000 depending on tile grade, pan type, valve work, and what the walls reveal once opened. Call (833) 997-7759 for a free on-site estimate.
How the conversion actually runs, stage by stage
This job has a fixed rhythm. Here’s what happens, when, and where you make the decisions.
Stage 1: Site visit and scope (day 0)
We measure the alcove, check the valve wall, confirm drain location, and open the access panel if there is one. You decide the tile, pan style (prefab acrylic or tiled mud-set), and whether the valve and trim get replaced. We confirm in writing whether the existing drain and rough-in can stay. One visit, usually 60 – 90 minutes.
Stage 2: Demo and rough-in inspection (days 1 – 3)
Out comes the tub, surround, and backer. In an older Oakland bathroom this is the swing stage. We expose the framing, look at the drain line, and check the valve for corrosion and code compliance. If the drain is cast iron and rotten, or the valve is a two-handle relic behind the wall, that’s a scope change discussed before any new material goes in. Rough plumbing gets inspected at this point if we’re relocating anything.
Stage 3: Waterproofing and pan (days 3 – 5)
This is the stage homeowners underestimate. Cement board or a bonded waterproof membrane goes on the walls, a pre-sloped pan or tiled mud bed goes in, and we flood-test the pan for 24 hours if it’s a tiled build. No tile gets set until that passes. A prefab acrylic pan skips the flood test but demands a perfectly level, sound subfloor.
Stage 4: Tile, grout, and trim (days 5 – 10)
Wall tile, niche, curb, and glass get set in sequence, with a curing gap before grout. You’ll have already locked in the tile and grout color at Stage 1. Small-format tile and mosaics add days; large-format porcelain sets faster but needs a flatter wall.
Stage 5: Fixtures, glass, and final inspection (days 10 – 14)
Valve trim, showerhead, drain cover, and any glass panel or door go in. Final plumbing inspection closes the permit. We walk the shower with you, run water, and confirm the pan drains clean.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change the job
Most of the decisions land in week one, and each one moves both the schedule and the price:
- Prefab acrylic pan and surround vs. tiled shower. Acrylic installs fast, has no grout lines to seal, and lands closer to $3,500 – $5,500. Tiled showers look and feel like a real upgrade but carry a longer schedule and land $6,000 – $10,000 once waterproofing is done properly.
- Pan layout: standard alcove vs. curbless. A standard curb keeps the existing drain and floor height. A curbless or barrier-free entry usually needs the drain relocated and the subfloor recessed, which pushes the job to the upper end.
- Tile grade and size. Porcelain in the mid grade holds up well for decades with proper waterproofing. Natural stone (marble, travertine) needs sealing and adds cost and maintenance. Mosaic floors add labor.
- Valve and trim. A Kohler or similar pressure-balance valve replacement is worth doing while the wall is open. Keeping a working valve saves the cost but you may be draining a 30-year-old cartridge later.
- Glass. A fixed panel is the simplest and cheapest. A framed slider or frameless door adds cost but changes how the shower reads in a small bathroom.
- Vanity or tile refresh in the same room. Sometimes requested alongside; that veers into our broader bathroom remodeling scope and gets priced separately.
What Tub-to-Shower Conversion costs in Oakland, CA
Most tub-to-shower conversions here land between $3,500 and $10,000. The lower end is a prefab acrylic pan with a limited surround and no rough plumbing changes. The upper end is a fully tiled, curbless shower with a new valve, a glass door, and hidden damage found during demo. Here’s the line-item breakdown we put in a written estimate:
- Demo and haul-away: $350 – $700
- Waterproofing and shower pan: $900 – $2,200
- Wall and floor tile (material plus install): $1,200 – $3,800
- Valve, trim, and showerhead: $400 – $1,200
- Glass panel or door: $500 – $1,400
- Rough plumbing or drain relocation, if needed: $500 – $1,500
- Permit and inspection fees: typically $200 – $500
- Framing repair or drywall patching after demo: $150 – $800
What moves a job to the high end: relocating the drain for a curbless pan, opening walls and finding rot around the tub skirt or behind the surround, upgrading to a tiled mud-set pan, and adding a glass door. Our pricing is upfront and written, so the number on the estimate is the number you pay unless you approve a documented scope change. Right now we offer $1,000 off projects over $10,000 and 0% financing for 18 months – useful when the scope grows past a basic conversion.
See the difference
Before
After
Before
After
Before
AfterWhat Oakland homes specifically do to this job
Nearly every conversion we run here starts as a surprise. Oakland’s housing stock is dominated by pre-1940 construction: Victorian and Craftsman bungalows in Rockridge and Temescal, stucco-clad Mediterranean revivals in the flats, semi-detached homes across West Oakland. Once the tub comes out, the wall cavity often shows knob-and-tube wiring feeding an old receptacle or the original light fixture, and more than a few of these bathrooms sit under a prior unpermitted remodel that left the drain or valve in a state the current plumbing code won’t accept. The Oakland building department requires a plumbing permit for a tub-to-shower conversion because the fixture is being replaced and the drain and valve are being inspected. If opening the wall reveals framing that wasn’t engineered for the load (common in the older stock), or a structural change is proposed, the city expects an engineering letter – including on pre-1970 homes where even a modest change triggers it. What we find most often after demo: dry rot at the tub skirt from decades of slow leaks, failed backer board behind an old surround, and cast iron drains at end of life. Budget and schedule room for one disclosed issue, and you won’t be scrambling when we find it.
Serving Oakland, CA – Our Local Coverage Area
We serve Oakland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Oakland
Most conversions take two to four weeks from demo to final inspection.
The schedule stretches when the job needs a permit inspection on rough plumbing, a tiled mud-set pan with a 24-hour flood test, or hidden damage that adds a repair stage. Call (833) 997-7759 for a realistic timeline for your bathroom.
Yes, a plumbing permit is typically required.
The conversion replaces a fixture and touches the drain and valve, which the Oakland building department inspects. Skipping the permit can cause problems at resale, and most of these jobs also benefit from documented waterproofing. We pull the permit and pass the inspections as part of the job. Call (833) 997-7759 to talk through your scope.
Usually yes, if the new shower stays in the tub’s footprint and the drain location is compatible with the pan you choose.
Keeping the drain and valve in place is what lands the job in the $3,500 – $7,000 range. A curbless or barrier-free shower usually needs the drain relocated and the floor recessed, which pushes the job higher. Call (833) 997-7759 to confirm which layout your bathroom allows.
Typically $3,500 to $10,000.
The low end is a prefab acrylic shower with no rough plumbing changes. The high end is a fully tiled, curbless shower with a new valve, glass door, and hidden damage addressed. Call (833) 997-7759 for an exact written quote; estimates are free.
Every tub-to-shower conversion we do is covered by our 730-Day Done Right Promise.
If something isn’t done right within that window, we make it right. Product warranties from the tile and valve manufacturers stack on top. Call (833) 997-7759 with questions about coverage.
Get a free Oakland tub-to-shower conversion estimate
If you’re ready to price a Tub-to-Shower Conversion in Oakland, call (833) 997-7759 to schedule a free on-site estimate. We’ll measure the alcove, check the valve and drain, walk you through tile and pan options, and hand you a written line-item quote – no surprises, no pressure. If the project grows into something broader, you can see our full Bathroom Remodeling in Oakland scope, and we also cover the wider Oakland area and neighborhoods nearby, including Piedmont and Alameda. Some homeowners in the hills pair this interior work with Metal Roofing in Oakland or Tile Roofing in Oakland; both can quote on the same visit.
Written by the team at Groundwork Construction Co.