Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Burlingame, CA: What It Costs and What It Involves
Walk-In Showers & Shower Remodeling in Burlingame, CA runs $4,500 – $12,000 for a curbless or low-curb walk-in installation and $9,000 – $28,000 when the shower is part of a broader bathroom renovation with new tile, plumbing and a vanity. Most single-shower projects take two to three weeks from demo to final inspection, and the timeline is driven by waterproofing cure time and tile work, not by how fast we can swing a hammer. Call (833) 997-7759 to schedule a free on-site estimate and get a written line-item number before any material is ordered.
Key Takeaways
- Typical Burlingame walk-in shower: $4,500 – $12,000; with a full bathroom scope: $9,000 – $28,000.
- Two to three weeks is realistic for the shower alone; longer when tile, plumbing relocation or a vanity is added.
- Older Peninsula homes often hide a wall cavity that needs reframing once the drywall comes off.
- We pull the permit, pass the inspection, and back the work with the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How a Burlingame Walk-In Shower Project Actually Runs
A shower remodel is a sequence, and the order matters more than the calendar. Here’s how we handle it.
Stage 1: Walkthrough and written scope (day 1)
We measure the stall, check the existing drain location, test the supply lines, and open the inspection cover on the valve if there’s access. That visit is where you decide the footprint: standard 36×60 alcove, a wider 48-inch opening, or a custom curbless pan built to the room. You get a written line-item estimate within a few days, not a ballpark range on the back of an invoice.
Stage 2: Demo and rough-in inspection (days 2 – 4)
Out comes the old surround, the shower valve trim, and any glass. Once the framing is exposed we confirm what’s back there. In older Burlingame homes this is where surprises surface: a drain line that’s been patched, a header that was notched too deep, or knob-era wiring feeding a vanity light. Plumbers and electricians adjust rough-in on day three so the city inspector can sign off before anything is closed up. That inspection is not optional, and skipping it is how leaks get buried under tile.
Stage 3: Waterproofing and pan build (days 5 – 8)
Shower pan, cement board, and a bonded waterproofing membrane go in over two to three days. Curbless or low-curb designs mean the subfloor is recessed or a pre-sloped pan is set, which is a decision made at the estimate stage because it affects framing. Membrane cure and flood testing add time. We don’t speed that up. This is the stage that determines whether the shower lasts twenty years or fails in three.
Stage 4: Tile, glass and trim (days 9 – 16)
You choose tile and glass before demo, not during, because lead times on custom glass run one to three weeks. Tile set, grout, sealing, and the glass enclosure installation follow the plumber’s final connection. Frameless glass is a separate order and a separate crew. We schedule it so the glass doesn’t sit in a box while the tile cures.
Stage 5: Final inspection and walkthrough (day 17 onward)
Final plumbing inspection, then a walkthrough with the homeowner to test the valve, check slope, and confirm the drain runs clear. Punch list items get resolved before we hand over the job. Part of a full Bathroom Remodeling in Burlingame scope? The same five stages hold, just with more trades sequenced.
The Choices You’re Really Making: Pan, Tile and Glass
The materials are where the budget swings most, and where a shower either reads as builder-grade or as a finished room. Here’s the honest trade-off on each.
- Shower pan base – pre-made vs. custom. A pre-formed acrylic pan runs $400 – $900 and installs in a day. A poured or mud-set custom pan costs $1,800 – $3,500 installed and lets you go curbless, tile the floor flush, and fit an odd alcove exactly. Custom wins on looks and longevity; pre-made wins on speed and cost.
- Tile: porcelain vs. natural stone. Porcelain is $8 – $18 per square foot installed, tolerates moisture and cleans easily. Marble and travertine run $25 – $60 per square foot and require sealing every year or two; gorgeous, but softer and staining-prone in a shower.
- Glass: framed vs. frameless. Framed glass is $600 – $1,200 installed. Frameless 3/8-inch glass runs $1,200 – $3,000 and reads as high-end but needs precise installation and tempered panels.
- Fixtures. A standard pressure-balance valve is $150 – $350; a thermostatic valve with a separate volume control runs $400 – $900. Rain heads add $250 – $700. Kohler shower valve trim sits at the top of that range and pairs well with a custom tile job.
- Bench and niche. A tiled bench adds $400 – $900; a recessed niche adds $100 – $250. Both are cheap to add during framing and expensive to retrofit.
See the difference
Before
After
Before
After
Before
AfterWhat Walk-In Showers & Shower Remodeling Costs in Burlingame, CA
$4,500 – $12,000 is the realistic range for a walk-in shower remodel on its own in Burlingame. When the shower is rolled into a bathroom renovation with a vanity, new flooring and lighting, the project lands between $9,000 and $28,000. Here’s a line-item view of the drivers:
| Item | Typical Burlingame range |
|---|---|
| Demo and disposal | $400 – $1,200 |
| Rough-in plumbing adjustment | $300 – $1,500 |
| Waterproofing and pan | $800 – $3,500 |
| Tile and setting | $1,500 – $5,500 |
| Glass enclosure | $600 – $3,000 |
| Valve, head and trim | $300 – $1,200 |
| Permit and inspection | $300 – $900 |
The four variables that push a job to the high end: relocating the drain (adds $800 – $2,500 and requires framing changes), curbless construction, which means recessing the subfloor, natural stone tile, and damage discovered during demo. We price those variables in writing before work begins, and we don’t move the number after. Upfront pricing, no surprises, backed by our 18-month 0% financing for projects over $10,000.
What Specific Burlingame Conditions Do to This Job
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula. That shapes shower work here in ways it doesn’t in newer cities. In the Burlingame Park and Easton Addition neighborhoods, the housing stock is early-1900s through 1940s Craftsman, Spanish Colonial and Tudor cottages. Many have pier-and-beam or raised foundations, and the wall cavities behind a shower often hold original wiring or previous remodel layers stacked on the framing. Opening a shower wall routinely exposes what the drawings didn’t: a joist that needs sistering, drain lines that sit under a shifted slope, or a valve that was installed without a proper access panel. Local design review on exterior changes may not touch an interior shower, but the permit and inspection process on plumbing changes is real and enforced. The fog-influenced summers and damp Peninsula winters also make ventilation a real part of the job, not an afterthought; a properly sized exhaust fan and a sealed membrane matter more here than in a dry inland climate. Our Burlingame team knows what to expect once the first wall comes down.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Burlingame
Plan for two to three weeks for a shower-only project, and four to six weeks if it’s part of a larger bathroom renovation. Lead time on custom glass is usually the biggest scheduling constraint, so we order it early. Call (833) 997-7759 to talk through a timeline for your specific space.
Yes. Any work that moves a drain, changes a valve, or relocates plumbing requires a permit and a plumbing inspection in Burlingame. We pull it, meet the inspector, and provide the sign-off before the job is closed. That’s part of how the 730-Day Done Right Promise stays honest.
Usually, yes. If the existing drain and valve positions fit your new shower, the footprint stays put and the cost drops significantly. The plan changes when you want a curbless floor or a wider opening, because that’s when framing and drain location have to move. We’ll tell you at the estimate which scenario you’re in.
Between $4,500 and $12,000 for the shower alone, and up to $28,000 if it’s part of a full bathroom renovation. Tile grade, glass type, pan style and plumbing changes are the main variables. Call (833) 997-7759 for an exact quote; estimates are free.
Every shower we install is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a leak, a slope issue or a failed seal shows up within that window, we come back and make it right. Compare that against typical one-year contractor warranties.
Get a Free Walk-In Shower Estimate in Burlingame
If you’re planning Walk-In Showers & Shower Remodeling in Burlingame, call (833) 997-7759 to schedule a free on-site estimate and design consult. We’ll walk the space, measure the stall, and give you a written line-item quote the same week. Our technicians have up to 12 years of experience and arrive background-checked and uniformed. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.