Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Emeryville, CA
Walk-In Showers & Shower Remodeling in Emeryville usually runs $9,000 – $28,000, with a standalone walk-in shower installation at $4,500 – $12,000 and a shower replacement at $3,000 – $8,500. Most projects take two to four weeks from demo to final inspection. Curbs, linear drains, waterproofing, tile, glass, and any plumbing relocation drive the number. Call (833) 997-7759 and we’ll price your Emeryville shower with a written, line-item estimate at no cost.
How a walk-in shower comes together, stage by stage
A walk-in shower is mostly what you can’t see. The waterproofing, the sloped pan, the framing, and the drain all have to be right before a single tile goes up. Here’s the real sequence we run in Emeryville.
Stage 1: Measure and demo (days 1 – 2). We protect the route, shut the water, and pull the old surround, pan, and valve. We open the wall far enough to see the framing and the drain line, because a 1920s cottage and a mid-century apartment shell hide very different surprises. You confirm the final footprint and drain position before anything gets rebuilt.
Stage 2: Rough-in and inspection (days 3 – 5). If we’re moving the valve, adding a bench, or relocating the drain for a linear drain, the plumbing and any electrical for lighting or a fan happen here. This is the stage a permit inspection looks at, so we schedule it and don’t cover walls until it passes. You pick your valve brand and trim now, since the rough-in depth depends on it.
Stage 3: Waterproofing and pan (days 6 – 8). We build the sloped pan, set the drain, and apply a bonded waterproofing membrane or a prefab foam pan system, then flood-test where the job calls for it. The pan is the part people skip. Skip it and the leak shows up on the ceiling below in a year. You choose curb height or a curbless entry here, which affects the framing and the glass.
Stage 4: Tile, grout, and glass (days 9 – 16). Wall tile, floor tile, niches, and trim go in, then grout and seal. We template glass only after tile, so the enclosure fits the actual opening instead of a nominal one. You approve the glass style, the hardware finish, and the door swing before templating.
Stage 5: Fixtures and final walkthrough (days 17 – 20). We hang the glass, set the trim and showerhead, seal the joints, and run the water test with you standing right there. Final inspection closes the permit, and we walk you through care and the 730-Day Done Right Promise before we pack up.
Budget a little more if tile is intricate or the drain is relocating. Most Emeryville showers land in that three-to-four-week window, and we tell you up front which stage is the one that could stretch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually shape your shower
Every walk-in shower is a set of decisions, and each one trades cost against upkeep. Here’s how we walk through them.
- Curbless vs. low curb. A curbless entry looks clean and is worth it for aging-in-place, but it needs the floor structure lowered or the neighboring floor raised, so it adds framing and cost. A low 2 – 4 inch curb is the honest budget pick and still easy to step over.
- Prefab pan vs. mud-set tile floor. A foam or acrylic pan goes in fast and reliably. A mud-set tile floor is fully custom and matches the walls, but it adds labor and needs a real slope. We build both.
- Tile material. Porcelain is the workhorse: dense, water-resistant, and easy to clean. Natural stone like marble or travertine looks richer but needs sealing and shows mineral buildup from hard water. Large-format tile means fewer grout lines to scrub.
- Glass. Frameless glass in 3/8-inch or 1/2-inch tempered is the upgrade most people want. A semi-frameless or framed enclosure costs less and holds alignment better in an older, slightly out-of-square bathroom.
- Fixtures and valve. A thermostatic valve that holds temperature and a quality trim finish matter more than the showerhead. We work with Kohler and similar lines so replacement parts stay findable a decade out.
- Niches, benches, and lighting. A recessed niche and a fold-down bench are small add-ons that make a shower feel custom. A waterproof LED and a properly sized exhaust fan are about moisture control, not decoration.
What Walk-In Showers & Shower Remodeling costs in Emeryville, CA
A standalone walk-in shower in Emeryville typically runs $4,500 – $12,000, a shower replacement $3,000 – $8,500, and a shower folded into a full bathroom remodel lands in the $9,000 – $28,000 range. Here are the line items:
| Scope | Typical price |
|---|---|
| Shower replacement (like-for-like) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Full bathroom remodel including walk-in shower | $9,000 – $28,000 |
Five things move that number. Size is the obvious one: a 3×5 alcove is far cheaper than a 5×6 with a bench. Existing condition matters more in Emeryville than people expect, since old plumbing and rot behind tile add days. Moving the drain, the valve, or a wall adds framing and rough-in labor. Material grade runs from porcelain to stone and from a framed enclosure to 1/2-inch frameless glass. Permit scope adds a fee and a required inspection stage. Everything above is included in a written, line-item estimate: demo, rough-in, waterproofing, tile, glass, fixtures, and the permit. What typically isn’t included is unforeseen structural or plumbing repair we can’t see until walls open, and any cosmetic work outside the shower. Upfront pricing means the number you see is the number you pay, and we flag anything extra before we touch it.
See the difference
Before
After
Before
After
Before
AfterWhat Emeryville homes specifically do to this job
Emeryville is a small, built-out city, so nearly every project here is infill work, and that changes how shower remodeling goes. West of San Pablo Avenue you’ll find early-1900s worker cottages and bungalows whose bathrooms were plumbed for a tub-and-shower combo, and taking that wall out for a walk-in means checking framing and drain location in a house that was never built for it. The mid-century industrial shells being adapted into housing bring their own issues, and the 2000s-to-2020s mid-rise apartments near the shoreline tend to come with stricter building rules.
The marine air matters here too. Emeryville sits right on the bay with foggy summers and rain concentrated November through March, so moisture control inside a bathroom is not a side issue – a properly sized exhaust fan and sealed enclosure keep the same damp that corrodes exterior steel from growing mold behind tile. Permitting runs through the city, and any job touching plumbing or structure gets a rough-in and final inspection, so we build those dates into the schedule. HOAs on the newer mid-rises often require plans and proof of licensed, insured work before approval. And because this is infill with a history of industrial parcels, an older conversion can turn up undocumented conditions behind a bathroom wall, which is why we open the wall and look before we quote the rebuild. We cover all of Emeryville, and when a shower is part of a larger project, it ties naturally into Bathroom Remodeling in Emeryville.
Serving Emeryville, CA – Our Local Coverage Area
We serve Emeryville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Walk-In Showers & Shower Remodeling in Emeryville
Most walk-in shower projects take two to four weeks from demo to final inspection. Straight swaps with no plumbing moves finish closer to two weeks; curbless builds, linear drains, and custom tile push it toward four. We give you a stage-by-stage timeline in the written estimate, and a live person answers the phone 24/7 if a question comes up mid-job. Call (833) 997-7759 for your exact timeline.
Yes if you’re moving plumbing, changing the drain, or altering structure – and Emeryville requires inspections on that work. A pure cosmetic tile swap with no plumbing change sometimes doesn’t need one. We pull the permit and handle the inspections so you’re not chasing the city, and it’s part of your estimate. Call (833) 997-7759 to talk through your scope.
Often, yes. If the existing drain and valve can stay where they are, we keep the rough-in and save you both time and cost, which usually lands you nearer the $4,500 – $8,500 end. A linear drain or a relocated valve is where the floor moves and the price climbs. We’ll tell you straight at the estimate which one your bathroom allows.
The gap is scope: a single shower replacement sits at the low end, and a full bathroom remodel with a walk-in shower sits at the high end. Size, whether plumbing or structure moves, tile and glass grade, and the permit all push it up. Estimates are free and line-itemed, so you see exactly what each choice costs. Call (833) 997-7759 for yours.
Every shower we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform. Call (833) 997-7759 with any warranty question.
Get a free estimate on your Emeryville shower
Call (833) 997-7759 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Emeryville. We’ll measure the space, open the wall to check the plumbing and framing, and hand you a written, line-item price with the permit scope, real timeline, and glass and tile options. A live person answers, 24/7. No pressure, no surprises.
Written by the team at Groundwork Construction Co.