Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in San Francisco, CA: What It Takes and What It Costs
Window replacement in San Francisco typically runs $5,310 to $17,700 for a whole-house job, and most homes we see take three to five working days once the new units are on site. The long lead time isn’t the install; it’s the custom sizing most Victorian and Edwardian openings demand, plus the city permit. Call (833) 997-7759 and we’ll walk through your scope and give you a written, line-item estimate before anything is ordered.
Day One Through Day Five: How a Window Replacement Actually Runs
Window replacement looks simple from the sidewalk. Up close, the sequence matters, and the order we do things in is what keeps a 120-year-old frame from turning into a surprise.
Stage 1 – On-site measure and scope (about 90 minutes). We measure every opening, check the existing frame for rot and square, and note which units are original wood and which were swapped in during a 1980s remodel. You decide here whether we’re doing a full-frame replacement or an insert into the existing frame. That one decision drives most of the cost.
Stage 2 – Ordering and permit (one to three weeks). Custom sizes go to the manufacturer; standard sizes move faster. We pull the permit. You sign off on the final spec sheet: glass package, frame material, grille style, hardware finish. This is the stage where homeowners change their minds, so we lock it in writing.
Stage 3 – Day one on site: protection and demo. Floors get covered, furniture gets moved, and we pull the old sashes. Openings are sealed with plastic the same day so the house never sits open overnight. In a Noe Valley Victorian we’re often finding dry rot behind trim that wasn’t visible from inside, and that’s a same-day conversation, not a surprise invoice.
Stage 4 – Days two and three: setting and sealing. New units go in, get shimmed, leveled, insulated at the perimeter, and flashed. We seal exterior joints with a paintable sealant rated for coastal moisture. Interior trim goes back on and gets caulked.
Stage 5 – Days four and five: finishing and walkthrough. Paint touch-up, glass cleaning, hardware adjustment. We walk every opening with you, demonstrate the locks and screens, and hand over the warranty paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions happen at Stage 1 and Stage 2. Here’s what actually matters and what each choice costs you in money and in upkeep.
- Full-frame vs. insert replacement. An insert drops a new sash into the existing frame and is cheaper and faster. Full-frame pulls the whole unit down to the rough opening and lets us fix rot and re-flash properly. On older San Francisco stock, full-frame is often the honest answer.
- Frame material: vinyl, fiberglass, or wood-clad. Vinyl is the budget pick and holds up fine in fog, though it can yellow over decades. Fiberglass resists moisture and movement better and costs more. Wood-clad aluminum, like the Andersen and Marvin lines we install, suits historic façades and carries the highest price.
- Glass package. Double-pane low-E is the standard now. Triple-pane is available but rarely pays back in a mild coastal climate where heating bills are modest to begin with.
- Grille and trim style. Matching the existing divided-light pattern keeps a Victorian looking like itself. We can source matching profiles through ViewLux and similar suppliers where the opening is unusual.
- Hardware and screens. Finish, lock style, and screen type. Small line items, but they’re the parts you touch every day.
What Window Replacement Costs in San Francisco, CA
Expect $5,310 to $17,700 for a typical whole-house window replacement in San Francisco. A single opening in a straightforward wall sits at the bottom of that range; a full-frame job on a multi-story Victorian with rot repair and custom sizing lands at the top.
What pushes a job toward the high end:
- Opening count and size. More units, more labor and more material. Oversized or arched openings cost more per unit.
- Existing condition. Rot, failed flashing, or out-of-square frames mean carpentry beyond the swap.
- Full-frame vs. insert. The single biggest swing in the estimate.
- Glass and frame grade. Standard vinyl double-pane vs. wood-clad with a premium glass package.
- Permit scope and access. Upper-floor work on a narrow lot means scaffolding or lift time, and that’s real money.
A written estimate from us lists units, labor, disposal, permit fees, and any allowance for rot repair, so the number you see is the number you pay. What it won’t cover is surprises hidden inside a wall, which we flag in writing before we open anything up. This is also where window replacement often becomes part of a full Windows & Doors in San Francisco scope, especially when doors are failing at the same time.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco’s housing stock makes window replacement harder than it is almost anywhere else on the Peninsula. Rows of 1880s to 1920s wood-frame Victorians and Edwardians sit shoulder-to-shoulder on narrow lots through the Mission, Noe Valley, and the Haight, and most of those openings were cut by hand to no standard dimension. There’s no catalog size that drops in.
The fog line matters too. Constant coastal moisture drives rot in exposed wood framing, and we regularly find failed sill flashing on the west-facing side of a house while the east side is fine. That fog also compresses the dry season, so exterior sealing and paint touch-up get scheduled around rain, not heat. And the city’s historic-review triggers can add review time to a job that would be a simple permit in Daly City. We plan the schedule around that reality instead of pretending it doesn’t exist, and we cover San Francisco ZIPs 94126, 94137, 94139, and 94140 regularly.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in San Francisco
A typical whole-house window replacement in San Francisco takes three to five working days on site once units arrive, plus one to three weeks of lead time for custom sizing and the permit. Plan for the full span when you’re scheduling around a move or a rental.
Yes, generally. Like-for-like replacement often moves through a simpler review, but any change to the opening size, frame, or façade triggers more. We pull the permit and handle inspection scheduling so you’re not chasing the city. Call (833) 997-7759 if you’re unsure about your specific project.
Often, yes. An insert replacement leaves the existing frame and interior trim in place, which keeps the historic look and skips the carpentry. Where rot or failed flashing turns up, full-frame is the right call. We’ll tell you which one your openings actually need.
Whole-house window replacement in San Francisco runs $5,310 to $17,700. The low end covers standard sizes in insert style; the high end reflects full-frame work with rot repair, custom sizing, and upper-floor access. Call (833) 997-7759 for an exact quote – estimates are free.
Every window replacement we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That sits alongside the manufacturer’s warranty on the units themselves. You’ll get both in writing at the walkthrough.
Get a Free Window Replacement Estimate in San Francisco
Call (833) 997-7759 to schedule a free on-site estimate for window replacement in San Francisco. A live person answers around the clock, and we’ll measure your openings, talk through full-frame versus insert, and hand you a written line-item quote with no surprises. If fencing is on your list too, homeowners often pair this with Vinyl Fence in San Francisco or Aluminum Fence in San Francisco while we’re already on site. You can also review our broader Windows & Doors work first.
Written by the team at Groundwork Construction Co.