Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Emeryville: What It Costs and How Fast It Goes Up
A wood fence in Emeryville typically runs $3,500 to $9,000 for a residential lot, and most jobs are finished in two to four working days once the permit is in hand. That range covers a standard 6-foot dog-ear cedar or pressure-treated pine run with posts set in concrete; the number that lands on the high end usually involves tight infill lots, gate hardware, or a tear-out of an old fence that’s been leaning since last winter’s rain. Call (833) 997-7759 for a free on-site estimate and we’ll price your actual run, not a square-foot guess.
How the Job Actually Goes, Start to Finish
Wood fence work is a sequence, not a single visit. Here’s the order we work in, with the decisions that fall on you at each stage.
Stage 1: The site visit and measure (about 45 minutes)
We walk the property line with you and a tape. On Emeryville’s narrow infill parcels, this is where the real questions surface: where the true property line sits, whether an existing fence is on your side or the neighbor’s, and whether the ground is the flat fill you’ll find near the shoreline or the graded slope common on lots rising toward San Pablo Avenue. You get a written, line-item quote on the spot and a clear answer on whether a permit is needed. Nothing gets ordered until you sign.
Stage 2: Permit and utility locate (2 to 10 business days)
Most fence permits in Emeryville clear in a week or two, and the city will want a plot plan showing the fence height and setback. Before anyone digs, we call for a utility locate, then hand-dig the post holes near any marked line. On small parcels that were once industrial or warehouse ground, that locate step matters more than usual; we don’t machine-auger where we can’t see what’s below.
Stage 3: Demo and post-setting (day one on site)
Old fence comes out first, and we haul it away the same day. Posts go in next, set in concrete at 8-foot centers, plumbed and braced, and left to cure overnight. This is the day you’ll see the yard look worst. Fence panels are not hung until the posts have set, because a post that shifts after the panels go up will rack the whole run.
Stage 4: Rails, panels, and gates (day two into day three)
We hang rails, then boards, working from a string line so the top of the fence stays level over the full run. Gates get their own frame and hinge set, because a gate hung on an unsupported post is the thing that fails first. On a 60-foot run this is a full day, maybe a day and a half if there are two gates and a corner.
Stage 5: Finish and walk-through (day three or four)
Final trim, hardware check, gate swing adjustment, and a walk of the line with you. If you chose a stain or sealer, it goes on after the wood has had time to dry, which may push that step to a later visit depending on weather. We leave the site cleaner than we found it and walk you through what to watch for in the first rain season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Four decisions drive most of the cost and nearly all of the long-term satisfaction on a wood fence.
- Species and grade. Pressure-treated pine is the budget pick and holds up well when set dry, but it moves and checks. Western red cedar costs more and stays straighter, with natural rot resistance. Clear cedar (no knots) is the premium end and mostly chosen where the fence faces a street or a neighbor’s window. On Emeryville’s marine side, we push cedar or a treated pine rated for ground contact below grade.
- Board style. Dog-ear, flat-top, and French gothic are the three we install most. Dog-ear is the standard pick; flat-top reads cleaner against modern mid-rise architecture. Board-on-board (alternating boards on both faces) costs more in material but gives a solid look from either side, which matters on shared lines.
- Height and gate hardware. Six-foot is standard in Emeryville. Eight-foot needs a closer look at wind load and usually a permit conversation. Gate hardware is where cheap jobs show: a self-closing hinge and a proper latch on a braced frame add a few hundred dollars and save years of sagging.
- Finish. Untreated wood will gray out within a season on the bay side. A penetrating stain or sealer applied after the wood dries adds cost upfront and typically buys you several more years before the fence needs attention again.
What a Wood Fence Costs in Emeryville, CA
Plan on $3,500 to $9,000 for a residential wood fence in Emeryville. Here’s how a line-item estimate typically breaks down:
| Line item | Typical range |
|---|---|
| Demo and haul-away of existing fence | $300 – $900 |
| Posts, concrete, and setting | $600 – $1,600 |
| Rails, boards, and assembly | $1,800 – $4,500 |
| Gate(s) with hardware | $400 – $1,200 each |
| Stain or sealer | $400 – $1,000 |
| Permit fees | $150 – $500 |
What pushes a job toward the high end: length (a 40-foot side yard is a different job than 150 feet of perimeter), tear-out of a fence that’s been in the ground decades and won’t come out clean, a sloped or obstructed line that needs step-panels or a retaining detail, premium cedar over treated pine, and multiple gates. What moves it down: a short run on flat ground with the old fence already gone and a single gate.
Every quote we write is line-item and fixed. The number you see is the number you pay, and if something below grade turns out worse than the site visit suggested, we come to you with the finding before we touch it, not after. If your project is part of a larger yard redo, that’s a natural fit with Fence Installation in Emeryville, and homeowners often pair this with Concrete Driveways & Concrete Work in Emeryville when the fence line borders a driveway apron.
See the difference
Before
After
Before
After
Before
AfterWhat Emeryville Homes Specifically Do to This Job
Emeryville is a built-out city where nearly every project is infill, and that shapes fence work in ways you won’t hit in Berkeley or Piedmont. West of San Pablo Avenue the housing stock runs to early-1900s worker cottages and bungalows with narrow side yards, so most fence runs here are short, shared, and tight against a neighbor’s structure. That means two things: property-line accuracy matters more than fence length, and step-panels over uneven ground are common. The parcels near the shoreline are flat and low-lying, and the marine fog accelerates corrosion on gate hinges and fasteners; we spec galvanized or stainless hardware as a matter of course. Rain concentrates between November and March, so exterior sequencing gets planned around it, and a post set in saturated clay won’t hold like one set in dry ground. The buried surprise here is real: any lot that was once part of the old industrial zone can hide undocumented fill or an old tank, which is why we confirm what’s below before we dig. We work across the 94662 and 94608 ZIPs and the full Emeryville area, and our Fence Installation service covers the wider scope when the job grows beyond a single line.
Serving Emeryville, CA – Our Local Coverage Area
We serve Emeryville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Emeryville
Most residential runs are finished in two to four working days on site, plus a week or two for the permit. A short 40-foot run with one gate can wrap in two days; a full perimeter with demo and stain runs closer to four. Call (833) 997-7759 and we’ll give you a schedule estimate for your specific line.
Usually yes for anything six feet or taller, and the city will want a plot plan showing height and setback. Shorter decorative sections sometimes clear without one, but we confirm with the city before we order material rather than after. Call (833) 997-7759 and we’ll tell you what your run needs.
In most cases yes. We hand-dig posts near utilities and work around established planting where the line allows. What we won’t do is set a post blind over an unmarked line. If the fence borders a structure or a retaining wall, we’ll flag it at the site visit before quoting. Call (833) 997-7759 to schedule that visit.
Expect $3,500 to $9,000 for a standard residential wood fence, with the low end on a short flat run and the high end on a long perimeter with demo, multiple gates, and a premium cedar upgrade. Every quote is written line-item and fixed, so the range collapses to one number once we’ve measured. Call (833) 997-7759 for an exact quote, free on site.
Workmanship is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers installation and hardware. Material defects are covered by the manufacturer. Call (833) 997-7759 and we’ll walk you through exactly what’s covered before you sign anything.
Get a Free Wood Fence Estimate in Emeryville
Call (833) 997-7759 to schedule a free on-site estimate for your wood fence in Emeryville. A live person answers around the clock, so you’re not waiting until Monday. On the visit we measure the line, check utilities and grade, and hand you a written line-item quote with a fixed price and a start date. No pressure, no vague numbers. Paver Driveways in Emeryville is another job homeowners often pair with a fence project while we’re already on site.
Written by the team at Groundwork Construction Co.