Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Albany, CA: What It Actually Takes
An aluminum fence for a typical Albany, CA property runs $4,000 to $10,000 installed, with most single-family lots landing in the $3,500 to $9,000 range once you settle on height, spacing and finish. The work itself is a two-day job on open ground and closer to three or four days when we’re tearing out an old fence, correcting property-line grade, or tying into an existing gate. Call (833) 997-7759 and we’ll walk your lot, measure the run, and put a written number in your hands. Aluminum suits Albany well: it won’t rot in the wet winters, it holds a finish through the fog, and it doesn’t block the light the way a solid wood run does on a narrow lot.
How the job runs, stage by stage
Aluminum fence work is front-loaded. Most of the thinking happens before anyone digs, and the installation itself moves quickly once the layout is locked.
Stage 1: On-site measure and property-line check (day 1, about 90 minutes)
We walk the run with you, pull the plat or assessor’s map, and confirm where the line actually sits. On older Albany bungalow lots the fence is often an inch or two off the recorded line, and we’d rather find that now than after the posts are set. You decide height, color and gate placement at this visit. You leave with a written line-item quote, not a ballpark.
Stage 2: Permit and HOA review (3 to 10 business days, depending on scope)
Fences under six feet usually skip the building permit, but corner lots and anything in a front or side setback can trigger review. We handle the submittal and the counter time. If your block has CC&Rs, we’ll read them with you so the style and finish you pick clears the architectural review the first time.
Stage 3: Demo and layout (day 2 of the build, half a day)
Old posts come out, footing holes get marked at even spacing, and we call 811 for utility locate before the auger touches soil. This is the stage that surprises people: a buried irrigation line or a shallow old footing can add half a day. We build that buffer into the schedule rather than into your invoice.
Stage 4: Post setting and panel hang (day 2 into day 3)
Posts go in concrete footings set below the frost line and crowned so water sheds away from the base. Racks and pickets follow once the footings cure, and the gates get hung with self-closing hinges if you want them. A straight 150-foot run is a solid two-day install.
Stage 5: Gate hardware, alignment and walkthrough (2 to 3 hours)
We set the latches, check every gate swing, touch up any field cuts, and walk the whole line with you. You sign off on the finished run, and we leave the written warranty. If something’s off six months from now, the 730-Day Done Right Promise covers it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually matter
Aluminum fence is not one product. What you pick at the counter moves both the price and how the fence looks in ten years.
- Residential vs. heavy-gauge commercial grade: Residential grade (think Barrette’s standard pool and yard systems) runs lighter and costs less. Heavy commercial grade carries thicker pickets and heavier rails, and it’s worth it on long runs or where kids and dogs will lean on it.
- Powder-coat finish and color: Black is standard and cheapest. Bronze, white and a few earth tones cost more but blend with Albany’s stucco cottages. A good powder coat holds through coastal fog; a cheap one chalks and fades.
- Height and picket spacing: Four-foot is the common yard line. Five-foot gives more privacy from the street. If you have a pool, the spacing has to meet code for no-climb and self-latching gates; we’ll spec that correctly the first time.
- Gate style and hardware: Walk gates, double-drive gates and self-closing pool gates are all separate line items. Self-closers and keyed latches add cost but solve the problem you’d otherwise fix later.
- Rack vs. flat-top design: A racked top follows the grade of your lot. Flat-top looks cleaner on level ground but leaves gaps on a slope. Most Albany lots slope, even the small ones, so racked is often the honest answer.
What Aluminum Fence costs in Albany, CA
Plan on $4,000 to $10,000 for a standard residential aluminum run, with the most common Albany job landing between $3,500 and $9,000. That range assumes the fence is replacing an old one on the same line and no extra grading or utility work is needed.
Here’s what moves that number up or down:
- Linear footage: Every foot of fence adds material, posts and labor. A 60-foot run and a 200-foot run are different jobs.
- Existing fence and demo: Pulling out old wood posts set in concrete can add a day of labor. Clean ground is cheaper.
- Grade and slope: A sloped yard means racked panels or stepped sections, and more posts to hold it even.
- Gates: Each gate is a stand-alone line item. A drive gate with hardware can add a meaningful chunk on top of the base run.
- Material grade and finish: Heavy commercial grade and non-standard colors sit at the top of the range; standard black residential grade at the bottom.
A written estimate from Groundwork Construction Co. lists posts, panels, concrete, gates, hardware and labor line by line. What we don’t include unless you ask: fence removal of old concrete footings, grading correction, and any utility relocation. Those get their own line so nothing shows up as a surprise mid-job. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Albany homes specifically do to this job
Albany is a small, fully built-out East Bay city where almost every construction project is a remodel or addition on a tight lot, not new ground-up work. That changes aluminum fence. Many of the 1920s-1950s bungalows on these narrow lots have been built out to within inches of the property line, so the fence often has to run inside the setback or thread between a detached garage and the lot line. We measure in person for a reason: a set of plat lines on paper won’t tell you where the neighbor’s driveway apron actually sits.
Permitting here goes through a small city hall rather than a big county department, and that’s usually good news: tighter review, faster counter, but less tolerance for a submittal that doesn’t match the plan. Exterior work also has a narrow window between the fog-cooled summers and the wet winters, so we schedule installs for the dry months when we can. On the housing stock itself, the failure mode we see most is old chain-link or rotted wood posts lifting out of soggy soil after a wet winter. Replacing those with aluminum set in proper footings solves the problem once.
If your aluminum fence is part of a full Fence Installation in Albany project that runs more than one material, we’ll scope it together. Homeowners often pair this with Driveway Repair & Replacement in Albany when the fence line runs along a cracked apron, and with Patios, Walkways & Pool Decks in Albany when a pool enclosure is part of the plan. Our Fence Installation service covers the wider scope, and we serve all of Albany, including the neighborhoods around Memorial Park and the Solano Avenue corridor.
Serving Albany, CA – Our Local Coverage Area
We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Aluminum Fence in Albany
Most residential aluminum fence jobs in Albany take two to four days from demo to walkthrough, depending on run length, gate count and how much old fencing we’re removing. The permit review, when it’s needed, runs three to ten business days ahead of the install. We give you a firm start date and schedule once the permit clears.
Typically no for a fence under six feet on a standard side or rear line, but corner lots and anything in a front setback often do require review. We check your specific parcel against the recorded map and handle the submittal if it’s needed. Call (833) 997-7759 and we’ll tell you within a day whether your lot triggers a permit.
In most cases yes. We call 811 before we dig, mark the run so we clear irrigation and buried cable, and set posts around the existing grade rather than regrading the yard. If a line is in the way, we tell you before we start, not after.
For a standard residential run, $4,000 to $10,000 installed, with most single-family properties landing between $3,500 and $9,000. Size, grade, gates and demo push the number one way or the other. Call (833) 997-7759 for an exact quote after we see the lot; estimates are free.
Every aluminum fence we install is covered by the 730-Day Done Right Promise, which means if something isn’t right, we come back and fix it. We also back the install itself with a written workmanship warranty. That’s one of the longest guarantees in the residential construction space, and it’s in writing, not just spoken.
Get a free estimate for your aluminum fence in Albany
Call (833) 997-7759 to schedule a free, no-pressure estimate for your aluminum fence in Albany. We’ll measure the run, confirm the property line and entry points, and hand you a written line-item quote with a firm start date. You’ll get a live person on the phone, day or night. If you’re weighing materials, bring it up on the call and we’ll compare the honest trade-offs before you commit.
Written by the team at Groundwork Construction Co.